North Yorkshire · England
Bath Re-enamelling for Kirby Wiske homes
Our technicians come to Kirby Wiske for full bath re-enamelling and resurfacing. Nothing is taken out, and the work is guaranteed.
- Resurfacing from £350
- A roll-top that’s seen better days
- An outdated colour you’d like to change
Repair or replace in Kirby Wiske?
Replacing the bath means a plumber, removing a heavy bath, making good the walls and tiles and several days without a working bathroom. Re-enamelling gives the bath a new finish without moving it. Resurfacing from £350, with every job priced individually. A repair usually costs much less than people expect, especially compared with replacing and refitting. Send pictures and we’ll give you the exact figure.
What you get with us
- A fixed quote before you book
- Every repair guaranteed for a year
- Honest advice, even when it means no job
- No extra charge for your area
See our pricing or bath cost comparison.
Bath re-enamelling in Kirby Wiske, done in place
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. Several coats of finish go on over a bonding primer, once the bath has been cleaned, repaired and prepared. Typical jobs include an old resurfacing that’s failing and chips and rust in more than one place, on Victorian roll-tops, acrylic baths and basins & shower trays.
Big or small, you get the same one-year guarantee in Kirby Wiske and across North Yorkshire.
- Location
- Kirby Wiske (YO7)
- Area hub
- North Yorkshire
- Cover
- 12 months on all our work
- Quote
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Prices and what affects them
Prices start from £350. Quotes are free and the price is fixed. What we look at:
- Previous DIY repairs that have to come out
- What kind of damage it is
- How much damage there is
- What the surface is made of
It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you’ll get a fixed figure.
Quotes from your photos
When you take your pictures, these tips help us give you a firm price:
- One sharp close-up of the damage
- Whether it’s been repaired or coated before
- A wider photo showing the whole bath
- Daylight if possible, and no flash reflection
There’s no need for us to visit first. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we will reply with a fixed quote.
Where we work around Kirby Wiske
Kirby Wiske is about 6 miles south of Northallerton, in North Yorkshire. We travel to homes and businesses in Kirby Wiske and nearby villages, so you don’t need to take anything anywhere. Kirby Wiske is one of 626 places in North Yorkshire where we work. Our jobs stretch from Kirby Wiske to Leeds (about 31 miles away).
Here we cover the YO7 postcode area. Close by, we cover South Otterington (2 miles north), Sandhutton (2 miles south), Maunby (2 miles north-west), Pickhill (2 miles south-west) and Sinderby (3 miles south-west). Larger places within reach include Ripon (10 miles south-west), Catterick Garrison (14 miles north-west), Northallerton (6 miles north), Thirsk (4 miles south-east), Colburn (14 miles north-west) and Easingwold (13 miles south-east).
Landmarks near Kirby Wiske
Around Kirby Wiske, we work in homes near Breckenbrough School and St John the Baptist's Church. For rail, the closest station is Thirsk station, roughly 3 miles south-east. Further afield, we also cover the area around Breckenbrough Castle (under half a mile south) and Friarage Hospital (5.9 miles north).
When a repair is not the answer
We’ll always be straight with you, so here’s what a repair won’t do:
- Leaks from fittings rather than the bath
- Damage hidden under a previous coating, until it’s stripped back
- A bath split right through the body
If in doubt, send pictures and we’ll say what we think.
Surfaces we repair
- Cast iron baths
- Victorian roll-tops
- Pressed steel baths
- Acrylic baths
- Basins & shower trays
For landlords and businesses
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.
Housing associations and facilities teams use us for planned and reactive repairs. A repair avoids taking out and refitting, which matters when someone is living in the home.
DIY repairs versus a professional job
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is usually the cheaper route.
We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
The process
We begin by going over the job with you, so there are no surprises. Next, we cover and mask everything nearby and the work begins. It normally takes a full day.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Getting ready for the visit
- Let the surface dry out before the visit
- Let us know which floor the room is on
- Tell us about parking, stairs or access
Getting a price
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed quote the same day in most cases.
Advice
Questions from Kirby Wiske
How long is the bath unusable?
One day for most baths, ready the following day. We give you timings with the quote.
Do I have to be there?
Someone needs to let us in and show us the job. You do not need to watch us work.
Is it messy?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
Is the work guaranteed?
Every repair comes with a one-year guarantee. We will explain what it covers when we quote.
How do I book?
Some pictures, your postcode and how to reach you. On the day, we only need access to the room.
Will there be fumes?
A little, during the work. We set up ventilation and the smell fades as it cures.
Are you accredited?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Can you re-enamel a roll-top bath?
Yes. We can do the inside and outside if you’d like.
Also near Kirby Wiske
Also in Kirby Wiske
Do you need bath re-enamelling in Kirby Wiske?
The gloss on enamel is thin, and abrasive cleaning slowly wears it away. Eventually the surface turns porous and stains.
Look out for these signs:
- A peeling or bubbling previous coating
- An outdated colour you’d like to change
- Staining under the taps and around the waste
- An original cast iron bath that needs restoring
What to look for in a quote
- What preparation is included
- How to care for the finish
- When it can be used again
- Whether there are any call-out or travel charges
Keeping it looking good
Good habits make a big difference to how long a repair lasts. Here’s what we suggest:
- Do not leave a chip unrepaired
- Fix dripping taps quickly
- Use washing-up liquid and a soft cloth
- Keep toiletries on a shelf rather than in the bath
The first few days matter most: let it cure fully, then use mild cleaners only. After that, no abrasives and no suction mats.
Rust spots on a worn bath get worse with time. Resurfacing before they spread keeps it simpler.
About our accreditations · Every repair comes with a one-year guarantee.
