Nottinghamshire · England
Bath re-enamelling & resurfacing in Kneesall, Nottinghamshire
Full bath re-enamelling and resurfacing at your home in Kneesall, with a one-year guarantee on every repair.
- Resurfacing from £350
- An old resurfacing that is failing
- A roll-top that’s seen better days
Our work in Kneesall
Kneesall is about 9 miles east of Forest Town, in Nottinghamshire. Customers in Kneesall get the same service as everywhere else we cover: a fixed quote from photos, and a technician at your door on the day. Kneesall is one of 329 towns and villages in Nottinghamshire where we work. Our nearest city page is Leeds, about 50 miles away.
Every address in NG22 is within our area, from the main roads to the quietest streets. That includes homes on Ossington Road, Elm Tree Rise and Baulk Lane. We also cover the places around Kneesall: Laxton (2 miles north-east), Wellow (2 miles north-west), Maplebeck (2 miles south), Eakring (2 miles south-west) and Winkburn (4 miles south). We also work in nearby towns such as Mansfield (10 miles west), Carlton (15 miles south-west), Worksop (12 miles north-west), Sutton in Ashfield (13 miles west), Hucknall (14 miles south-west) and Newark-on-Trent (9 miles south-east).
Near you in Kneesall
We visit homes around Rajdhaani pub, St Bartholomew's Church and Kneesall CofE Primary School and the streets around them. Well-known places in the area include National Holocaust Centre and Museum (1.7 miles north) and Laxton Castle (2.2 miles north-east).
Bath re-enamelling in Kneesall, done in place
When a bath is structurally fine but worn out on the surface, re-enamelling is normally the most cost-effective option. It avoids removal, plumbing and re-tiling. Common call-outs are for a peeling or bubbling previous coating and chips and rust in more than one place, across pressed steel baths, cast iron baths and acrylic baths.
Every repair comes with a one-year guarantee, wherever you are in Nottinghamshire.
- Where
- Kneesall (NG22)
- Area hub
- Nottinghamshire
- Guarantee
- One year on every repair
- Price
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Nearby places to Kneesall
More services for Kneesall
What happens on the day
Arrival times are agreed in advance, so you are not left guessing. On site, it takes a full day for most jobs. The room is left tidy.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure until the next day.
Before we arrive
- Plan for the room to be out of bounds to pets and children
- Point us to the nearest place to park
- Let us know which floor the room is on
Getting a price
To get a price, send two or three photos using our quote form or call us. We will tell you honestly if a repair is the right fix.
Advice
What your bath is made of matters
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
For landlords and businesses
For developers and builders, we fix damage before handover, saving last-minute replacements. Several plots can be done in one visit.
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
Signs you need bath re-enamelling in Kneesall
Previous coatings can fail too, lifting by the plughole or blistering. We strip what’s failing and start again.
Most people get in touch when they notice something like this:
- A coating lifting around the plughole
- Stains that won’t shift
- Lots of chips and rust spots
- Worn patches where water runs and sits
What to look for in a quote
- Whether the colour is mixed to match
- The length of the guarantee and what it covers
- Whether a trained technician does the job
- A fixed quote, and whether VAT is included
Should I try a DIY kit first?
It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.
For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
Prices and what affects them
Resurfacing from £350. Quotes are free and the price is fixed. What we look at:
- How hard the colour is to match
- Previous DIY repairs that have to come out
- The type of damage
- How many items we do on one visit
Set against the cost of replacement, repairing usually costs far less, because there’s no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
Getting a price from pictures
Photographing the damage takes a minute. Try to send:
- The material, if you know it
- Whether it’s been repaired or coated before
- Daylight if possible, and no flash reflection
- A coin beside the damage so we can judge size
Pricing is simple: snap the damage close up and then the entire item, send them over with your postcode, and you’ll get a fixed quote back. Quotes are free and you’re under no obligation.
Honest limits
A few problems are outside what a surface repair can do:
- Steel that has corroded right through
- Acrylic that moves when you stand in it
- A bath split right through the body
Not sure? Send pictures and we’ll give you a straight answer.
Materials we work on in Kneesall
- Cast iron baths
- Pressed steel baths
- Acrylic baths
- Basins & shower trays
- Victorian roll-tops
Questions from Kneesall
What information do you need?
Send pictures through the quote form or call 0345 017 0787, and we’ll do the rest.
Is there a smell?
Some odour is normal while we spray, so we ventilate the room. It fades as the coating cures.
How soon can you come?
That depends on our diary for your area. Send pictures with your postcode and we will reply with the earliest dates.
Do I need to be at home?
Someone needs to let us in and show us the job. You don’t need to watch us work.
How long does re-enamelling take?
Usually a day, then it’s ready to use the following day. Deeply pitted baths may need a second day.
Do you do work for letting agents?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
Can you price it without visiting?
Normally, yes. A close-up and a wider photo are enough to give a fixed price.
Someone resurfaced my bath and it’s peeling. Can you help?
Yes, we do this regularly. Removing the old finish takes extra time, which we include in the price.
Looking after it afterwards
Looking after the surface is easy:
- Leave the bath for the full curing time before using it
- Don’t leave a chip unrepaired
- Clean with a soft cloth and mild detergent
- A quick wipe after use keeps limescale away
Wipe the bath dry after use where you can, and rinse away any product left on the surface.
Worn enamel only gets rougher with time, and any rust spreads underneath. Acting earlier keeps the preparation simpler.
About our accreditations · Every repair comes with a one-year guarantee.
