Nottinghamshire · England
Bath Re-enamelling for Eakring homes
Local bath re-enamelling for Eakring: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- A peeling or bubbling previous coating
- Stains that won’t shift
DIY kit or professional repair?
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is normally cheaper.
Bath re-enamelling at your home in Eakring
Re-enamelling gives a worn bath a new glossy surface without a refit. It suits baths that are dull, stained, rough or chipped all over. If you’re dealing with enamel that’s lost its shine and feels rough and a coating lifting around the plughole, we can help, whatever the material.
You are covered for a year from the day of the repair. Just call us if there’s a problem and we’ll sort it.
- Area
- Eakring (NG22)
- Region
- Nottinghamshire
- Guarantee
- 12 months on all our work
- Quote
- From £350. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Places near Eakring
Also in Eakring
How the visit works
When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take the best part of a day. We tidy up before we leave and tell you when it’s ready to use.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure.
Before we arrive
- Let the surface dry out before the visit
- Mention any earlier repairs or resurfacing
- Mention if the room is upstairs or in a flat
How to get a price
A quote takes minutes to ask for: photograph the damage, then the entire bath, add your postcode and send them over. What comes back is a fixed price, not a guess.
Related advice
How to care for the repair
Once the work has cured, treat it gently:
- Get any chip repaired quickly
- Do not leave bottles, razors or sponges standing on the surface
- Leave the bath for the full curing time before using it
- Stick to gentle, non-abrasive cleaners
Treat the new finish gently at first: let it cure fully, then use mild cleaners only. From then on, avoid abrasives and suction mats.
On a worn bath, rust spots keep spreading and make the job bigger. It’s simpler to resurface before they spread.
Our work in Eakring
Eakring is about 7 miles east of Forest Town, in Nottinghamshire. From the centre of Eakring to the outlying streets, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Eakring is one of 329 towns and villages in Nottinghamshire we cover. Our jobs stretch from Eakring to Leeds (about 51 miles away).
All of NG22 is covered. Jobs here include addresses on Triumph Road, Kirklington Road and Triumph Close and the roads around them. Nearby, we also work in Maplebeck (2 miles east), Wellow (2 miles north), Kneesall (2 miles north-east), Kirklington (3 miles south) and Winkburn (3 miles south-east). We also work in nearby towns such as Mansfield (8 miles west), Carlton (13 miles south), Worksop (13 miles north-west), Sutton in Ashfield (11 miles west), Hucknall (12 miles south-west) and Newark-on-Trent (9 miles south-east).
Landmarks near Eakring
In Eakring, that means homes near St Andrew’s Church, among other places. Further afield, we also cover the area around National Holocaust Centre and Museum (3.6 miles north-east) and Laxton Castle (4.5 miles north-east).
Work for landlords and builders
Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.
For developers and builders, we fix damage before handover, so there’s no need to replace a damaged item at the last minute. We can visit several plots in one trip to keep costs down.
Do you need bath re-enamelling in Eakring?
A dull surface stains and holds dirt, and cleaning harder only makes it worse. At that stage, resurfacing is the fix.
People usually call us when they notice something like this:
- Chips and rust in more than one place
- A coating lifting around the plughole
- Worn patches where water runs and sits
- A roll-top that’s seen better days
What your quote should include
- What protection goes down before work starts
- Whether the price covers travel
- Whether the colour is mixed to match
- Who will actually do the work
Questions from Eakring
Will the price change on the day?
The price is fixed for what the pictures show. Anything extra is discussed before we begin.
Can you make a coloured bath white?
Yes, white is the usual choice. Tell us what you’d like when you ask for a quote.
What happens once I’ve sent pictures?
We review the photos and send a fixed quote.
Does the bath have to be removed?
No. We resurface it in place, so nothing else is disturbed.
Do you work in Eakring?
Yes, we do. Repair technicians travel to Eakring from across the region, with no extra charge for travel.
I’m a tenant. Can you help?
Yes, though it’s best to check with your landlord first. Many landlords are happy for a repair to be arranged.
Will there be fumes?
Yes, while we’re applying the finish. Ventilation keeps it down, and it fades as the finish cures.
Can you repair something that’s been repaired before?
Generally, yes. Tell us what was done before and we will plan for it.
Prices and what affects them
Prices start from £350. We charge the same across the UK, including Eakring. What changes the price is:
- Whether it’s a chip, crack, burn or wear
- Access to the area
- Whether old repairs or coatings need taking off
- How much damage there is
A repair generally costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.
How to get a fixed quote
You can take the photos on your phone, there is no need for anything special. Just make sure we can see:
- A wider photo showing the entire bath
- What it’s made of, if you know
- Natural light rather than flash
- Your postcode, so we can check dates
If you are in Eakring and want a price, the easiest route is pictures: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Materials and what they mean for the repair
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. It must be solid and not flex underfoot.
Repairing versus replacing in Eakring
Replacing a bath normally involves a plumber, a fitter and a tiler. Resurfacing is one technician, normally in a day, with the bath ready the day after. Our bath re-enamelling starts from £350. The price reflects the work involved, not your postcode. You will see the full price before booking, with no extras added later.
What you get with us
- Every repair guaranteed for a year
- Rooms protected and left tidy
- Honest advice, even when it means no job
- Colour-matched on site
Read our full price list or resurfacing vs replacement cost guide.
About our accreditations · Every repair comes with a one-year guarantee.
