Nottinghamshire · England
Bath Re-enamelling in Maplebeck
Full bath re-enamelling and resurfacing in Maplebeck, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- A coloured bath you want in white
- An original cast iron bath that needs restoring
How we handle bath re-enamelling in Maplebeck
We do not move the bath, so your taps, tiles and plumbing are left alone. It typically takes one visit, with the bath ready to use the following day. We are often asked to fix a roll-top that’s seen better days and a peeling or bubbling previous coating, on Victorian roll-tops, pressed steel baths and acrylic baths.
The work is covered for a year after we finish. Just call us if there is a problem and we’ll sort it.
- Area
- Maplebeck (NG22)
- Region
- Nottinghamshire
- Guarantee
- A year, on every repair
- Quotes
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
What we’re called out for in Maplebeck
Enamel wears gradually. Abrasive cleaners, limescale and years of use dull the surface, normally first under the taps and around the waste.
It’s worth getting a quote if you see:
- A period or roll-top bath worth keeping
- An old resurfacing that’s failing
- Stains that won’t shift
- Thin, worn enamel in places
Comparing quotes
- A fixed price, and whether VAT is included
- If travel is included in the price
- How long it needs to cure
- Whether cleaning and preparation are in the price
Nearby places to Maplebeck
Other services in Maplebeck
Materials and what they mean for the repair
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. It must be solid and not flex underfoot.
Should you replace it?
If the bath is sound, re-enamelling is generally much cheaper than replacing it, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s much quicker too. Our bath re-enamelling starts from £350. What it costs depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. We give a fixed quote from your photos, so there are no surprises on the day.
Why book with us
- Colours mixed by hand to suit your surface
- Technicians who travel to you, UK-wide
- Most jobs done in one visit
- No extra charge for your area
Read our pricing or resurfacing vs replacement cost guide.
How we price bath re-enamelling
Resurfacing from £350. Every quote is fixed and free. What we take into account:
- Whether we combine several jobs
- Previous DIY repairs that have to come out
- How easy the damage is to reach
- How hard the colour is to match
A repair normally costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.
How to get a fixed price
It only takes a minute to photograph the damage, and it saves a visit. Try to send:
- One picture of the entire bath
- Something in shot to show the size
- The postcode, so we can plan the visit
- Natural light rather than flash
To get a price, send two or three photos through our quote form or ring us. We will say immediately if a repair is the right fix.
Our work in Maplebeck
Maplebeck is about 7 miles north-west of Newark-on-Trent, in Nottinghamshire. Wherever you are in the NG22 postcode area, we come to you. Our technicians cover 329 places in Nottinghamshire. Our jobs stretch from Maplebeck to Leeds (53 miles away).
Jobs in NG22 are booked in the same way as anywhere else. Neighbouring places we cover include Winkburn (1 mile south), Kneesall (2 miles north), Eakring (2 miles west), Hockerton (3 miles south) and Kirklington (3 miles south-west). Further out, we also cover Mansfield (10 miles west), Carlton (13 miles south-west), Worksop (14 miles north-west), Sutton in Ashfield (13 miles west), Hucknall (13 miles south-west) and Newark-on-Trent (7 miles south-east).
Near you in Maplebeck
We visit homes around St Radegund's Church, among other places. Nearby you will also find National Holocaust Centre and Museum (3.9 miles north) and Laxton Castle (4.3 miles north).
Looking after it afterwards
Nothing complicated is needed, just a few sensible habits:
- Don’t use the bath until it has fully cured
- Avoid suction-cup mats
- Get any chip repaired quickly
- Store bottles off the bath
The first few days matter most: let it cure fully, then use mild cleaners only. From then on, avoid abrasives and suction mats.
On a worn bath, rust spots keep spreading. Resurfacing before they spread keeps it simpler.
Maplebeck: your questions answered
Do you cover Maplebeck?
Yes. We cover the whole UK and travel to Maplebeck and the rest of Nottinghamshire. Send us pictures for a fixed quote, or call 0345 017 0787.
Do you resurface freestanding baths?
Yes. We can do the inside and outside if you’d like.
Does re-enamelling smell?
Yes, while we are applying the finish. Ventilation keeps it down, and it fades as the finish cures.
What does bath re-enamelling cost?
Prices start from £350. Every job gets a fixed price from your photos. Send a close-up of the damage and a wider photo and your postcode.
Is there any odour?
There can be some smell while we work, which is why we ventilate. It clears as the materials cure.
How long is the bath unusable?
Generally one day, with the bath ready the day after. Deeply pitted baths may need a second day.
Can you quote from pictures?
Nearly always. If pictures do not show enough, we will ask for another angle.
Is repairing better than replacing?
Generally, yes. A repair skips the removal, fitting and redecorating. If it isn’t worth repairing, we’ll tell you.
What a repair cannot fix
A repair is not always the answer, and we would rather say so up front. Repairs won’t solve:
- Acrylic that moves when you stand in it
- A cast iron or steel bath that is cracked right through
- Problems we can’t see until an old finish comes off
Send us pictures and we will tell you honestly before booking.
Materials we work on in Maplebeck
- Pressed steel baths
- Basins & shower trays
- Acrylic baths
- Victorian roll-tops
- Cast iron baths
What happens on the day
Once we’re through the door, the aim is to do the job without disturbing the rest of your home. Surfaces nearby are masked off, the job takes a full day, and we finish by cleaning up and talking you through the result.
- The room is masked, protected and ventilated.
- Next we degrease the bath and fix chips and rust spots.
- We key the surface and put on a bonding primer.
- Several coats of new finish are sprayed on.
- The bath is left to cure and can normally be used the day after.
How to prepare
- Keep children and pets away from the room on the day
- Point us to the nearest place to park
- Mention any parking restrictions or tricky access
How to get a price
Pricing is simple: take a close-up of the damage and a picture from further back, send them to us with your postcode, and you’ll get a fixed price back. There is no charge for the quote and no obligation.
Read more
Work for landlords and builders
We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.
About our accreditations · Every repair comes with a one-year guarantee.
