Norfolk · England
Bath re-enamelling & resurfacing in Lamas, Norfolk
Problem with your bath in Lamas? We put it right where it is, mix the colour on the day and guarantee the work for a year.
- Resurfacing from £350
- An outdated colour you’d like to change
- Lots of chips and rust spots
How we handle bath re-enamelling in Lamas
Re-enamelling is a one-day job for most baths, and you can use the bath the following day. Taps, tiles, panels and plumbing all stay in place. Whether it’s an old resurfacing that’s failing and a bath in a colour that no longer suits, we can help, on cast iron baths, Victorian roll-tops and acrylic baths alike.
You get a one-year guarantee, the same in Lamas as everywhere else we work.
- Where
- Lamas (NR10)
- Area hub
- Norfolk
- Guarantee
- One year on every repair
- Price
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
What a repair cannot fix
Honesty matters more than a booking, so here’s what a repair cannot fix:
- Leaks from fittings rather than the bath
- Steel that has corroded right through
- A bath split right through the body
If in doubt, send pictures and we’ll say what we think before you book.
Materials we work on in Lamas
- Cast iron baths
- Acrylic baths
- Victorian roll-tops
- Pressed steel baths
- Basins & shower trays
How to care for the repair
Most damage we see is avoidable. These habits help:
- Never use suction bath mats
- Get any chip repaired quickly
- Do not let dyes or oils sit on the finish
- Wipe the bath dry after use in hard water areas
Wait for the curing time we give you before the first bath. After that, a soft cloth and washing-up liquid is all it needs.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Acting earlier keeps the preparation simpler.
About Lamas
Lamas is about 5 miles south-west of North Walsham, in Norfolk. From the centre of Lamas to the outlying streets, we offer exactly the same service: a fixed price, a tidy visit and a guarantee. We cover 797 places across Norfolk, from the larger towns to small villages.
Our visits in NR10 are booked in the same way as anywhere else. Streets in the area include The Street and Scottow Road, and we cover them all. We also cover the places around Lamas: Badersfield (1 mile north-east), Buxton (1 mile west), Great Hautbois (2 miles south-east), Skeyton (2 miles north) and Scottow (2 miles east). Larger places within reach include Norwich (8 miles south), Sprowston (7 miles south), Thorpe St Andrew (9 miles south), North Walsham (5 miles north-east), Sheringham (14 miles north) and Norwich Lanes (9 miles south).
Around Lamas
We visit homes around Goat Inn, Buxton Primary School and Church of St Andrew and the streets around them. The nearest railway station is Worstead station, about 3.3 miles north-east of the centre. Well-known places in the area include Hautbois Castle (1.9 miles south) and New Farm Aviation Heritage Museum (3.7 miles south).
Repair or replace in Lamas?
Replacing the bath means a plumber, lifting out the old bath, re-tiling or making good the walls and days without a bathroom. Re-enamelling gives the bath a new finish without moving it. Prices start from £350. Every job is a little different, so we price each one individually. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.
Why book with us
- Usually one visit, start to finish
- We leave the room as we found it
- CHAS, Constructionline and SafeContractor accredited
- No need to remove anything
Take a look at our full price list or resurfacing vs replacement cost guide.
Signs you need bath re-enamelling in Lamas
The gloss on enamel is thin, and every scrub with an abrasive cleaner takes a little away. Eventually the surface turns porous and stains.
Typical reasons for a call-out include:
- A bath that stays dull however much you clean it
- A period or roll-top bath worth keeping
- A bath in a colour that no longer suits
- Lots of chips and rust spots
Comparing quotes
- Who will actually do the work
- Whether the price is fixed and includes VAT
- What the guarantee covers, and for how long
- How the room is protected while they work
The process
We agree an arrival time beforehand, so you know when to expect us. On site, it takes most of the day for most jobs. The room is left tidy and ready to use once it has cured.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Before we arrive
- Point us to the nearest place to park
- Ensure the area is dry
- Open a window if you can
Getting a price
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, include your postcode and send them to us. You’ll get a fixed quote, not an estimate.
Read more
Materials and what they mean for the repair
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. It must be solid and not flex underfoot.
Lamas: your questions answered
Can you make a coloured bath white?
Yes. Coloured baths can be resurfaced in white, and we can do the rest of the suite as well.
How soon can you come?
We will give you dates with your quote. Tell us if you need it done quickly.
Can you fix a peeling bath coating?
In most cases. The old coating comes off before we resurface it. Mention it when you send pictures.
Is repairing better than replacing?
Normally, if the item is otherwise sound. A repair avoids removal and making good. We’ll tell you honestly if replacement makes more sense.
Is there a guarantee?
All our work carries our one-year guarantee. We’ll explain what it covers when we quote.
Do you do work for letting agents?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses.
Does the bath have to be removed?
No, it stays where it is. We work on the bath in place, with the room masked and ventilated.
What happens after I send photos?
You will get a fixed quote back. You’re under no obligation.
DIY repairs versus a professional job
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is typically the cheaper route.
Towns and villages near Lamas
What else we do in Lamas
Work for landlords and builders
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We are CHAS, Constructionline and SafeContractor accredited.
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
About our accreditations · Every repair comes with a one-year guarantee.
