Nottinghamshire · England
Bath Re-enamelling in Lambley
Bath re-enamelling across Lambley and nearby, usually in one visit.
- Resurfacing from £350
- Brown or grey marks that don’t clean off
- A dull, rough surface that will not come clean
About our bath re-enamelling in Lambley
We re-enamel a lot of period and roll-top baths, which would be difficult and expensive to replace. Resurfacing them in place keeps the original bath. If you are dealing with a bath that stays dull however much you clean it and brown or grey marks that don’t clean off, we can help, on basins & shower trays, pressed steel baths and cast iron baths alike.
The work is covered for a year after we finish. If anything isn’t right, ring us and we will sort it.
- Where
- Lambley (NG4)
- Region
- Nottinghamshire
- Cover
- 12 months on all our work
- Quotes
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Lambley questions
What happens after I send photos?
We come back with a fixed quote. There’s no obligation to book.
How long is the bath unusable?
Most baths are done in a day, ready the day after. We give you timings with the quote.
Is it safe with children and pets around?
On the day, the room should be kept clear of pets and children, so the repair isn’t disturbed while it cures.
Can I get a quote without a visit?
Nearly always. We only ask to see it in person if the photos cannot show what we need.
Do you do work for letting agents?
Yes, often. We quote for multiple addresses and fit around tenancy changeovers.
Does re-enamelling smell?
A little, during the work. Ventilation keeps it down, and it fades as the finish cures.
Is it worth repairing rather than replacing?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. We’ll be honest if it’s not worth it.
Is there a call-out fee?
We do not add a call-out fee. The fixed quote covers the visit and the work.
Towns and villages near Lambley
Also in Lambley
Repairing versus replacing in Lambley
Getting a cast iron bath out is hard work: they’re heavy, frequently need breaking up, and a new one isn’t cheap. Resurfacing in place avoids that entirely. Our bath re-enamelling starts from £350. Set against the cost of replacement, repairing normally costs far less, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Why us?
- A fixed quote before booking
- Colours mixed by hand to suit your surface
- Nothing taken out or refitted
- Most jobs done in one visit
Take a look at our full price list and bath cost comparison.
Prices and what affects them
Prices start from £350. You will not pay by the hour. The price depends on:
- How easy the damage is to reach
- The material and finish
- Unusual colours or finishes
- How many areas need work
We do not add extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Send pictures for a quote
Two or three clear pictures are generally enough. It helps if you send:
- Where you are, by postcode
- Natural light rather than flash
- Any details about the material
- A coin or ruler next to the damage for scale
We price from pictures so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and we will come back with a fixed figure.
Can I fix it myself?
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is generally cheaper.
A DIY attempt is not a disaster. We remove the old filler and start again, so it does not stop a professional repair. Just mention it when you send pictures, as it can add time.
Materials and what they mean for the repair
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Rust around the waste is common on steel, so we check it carefully.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s the part we put right.
Lambley and nearby
Lambley is about 2 miles north-east of Carlton, in Nottinghamshire. Our repair technicians come to customers in Lambley and nearby villages, so you do not need to take anything anywhere. We cover all 329 towns and villages across Nottinghamshire. You can also see our page for Birmingham, about 51 miles away.
Our visits in NG4 work the same way as everywhere else we cover. You will find streets such as Main Street, Steeles Way and Orchard Rise, and we cover them all. Neighbouring places we cover include Killisick (1 mile west), Woodborough (1 mile north), Epperstone (2 miles north-east), Lowdham (3 miles east) and Calverton (3 miles north). Larger places within reach include Mansfield (11 miles north-west), Beeston (9 miles south-west), Sutton in Ashfield (12 miles north-west), Hucknall (6 miles west), Newark-on-Trent (12 miles north-east) and West Bridgford (6 miles south-west).
Local landmarks in Lambley
In Lambley, that means homes near Lambley Primary School, Gedling Country Park and Holy Trinity Church and the streets around them. The closest station to Lambley is Burton Joyce station, roughly 1.6 miles south-east of the centre. Nearby you’ll also find Lowdham Motte (2.2 miles east) and Calverton Folk Museum (2.4 miles north). For a walk, there is Colwick Woods.
Common problems we fix in Lambley
Enamel’s shine is only skin deep, and every scrub with an abrasive cleaner takes a little away. Eventually the surface turns porous and stains.
You may need us if you’ve spotted any of these:
- Worn patches where water runs and sits
- Enamel that is lost its shine and feels rough
- Staining under the taps and around the waste
- A roll-top that is seen better days
Before you book anyone
- How long the guarantee is and what it covers
- How long it needs to cure
- How changes to the job are handled
- How to look after the finish
How it works
There’s not much you need to do on the day. Show us the job, point us to the room, and we’ll take it from there. The job generally runs to the best part of a day, tidy-up included.
- The room is masked, protected and ventilated.
- Next we degrease the bath and fix chips and rust spots.
- We key the surface and put on a bonding primer.
- We spray on the new enamel finish in several coats.
- We leave it to cure, and it’s usually ready the following day.
Preparing for the visit
- Let us know if it has been repaired before
- Make sure the room can be ventilated
- Let us know about parking or access
Ask for a price
Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can give you a fixed quote the same day in most cases.
Advice
For landlords and businesses
For developers and builders, we fix damage before handover, saving last-minute replacements. Several plots can be done in one visit to keep costs down.
We work for landlords, letting agents and housing providers in Lambley as well as homeowners. A repair between tenants keeps the property empty for less time, and it normally costs far less than a refit.
What we cannot put right
Not everything can be repaired, and we’d rather say so up front. We cannot fix:
- An acrylic bath that flexes badly underfoot
- Holes rusted through the metal
- Problems we can’t see until an old finish comes off
Send us photos and we’ll tell you honestly before you book.
Materials we repair
- Pressed steel baths
- Victorian roll-tops
- Cast iron baths
- Acrylic baths
- Basins & shower trays
About our accreditations · Every repair comes with a one-year guarantee.
