Telford and Wrekin · England
Bath re-enamelling & resurfacing in Lane End, Telford and Wrekin
Full bath re-enamelling and resurfacing at your home in Lane End, with a one-year guarantee on every repair.
- Resurfacing from £350
- A roll-top that is seen better days
- A bath in a colour that no longer suits
Bath re-enamelling in Lane End, done in place
If your bath is sound but looks tired, resurfacing is normally the best value. There is no removal, plumbing or tiling involved. Common call-outs are for a coloured bath you want in white and wear marks under the taps, in Victorian roll-tops, basins & shower trays and pressed steel baths.
The work is covered for a year after we finish. If anything isn’t right, ring us and we’ll sort it.
- Where
- Lane End (TF10)
- County
- Telford and Wrekin
- Guarantee
- One year on every repair
- Price
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
How to look after the repair
Simple care helps the repair last. We recommend:
- Do not let dyes or oils sit on the finish
- Respect the curing time we give you
- Don’t leave bottles, razors or sponges standing on the surface
- Use washing-up liquid and a soft cloth
Wipe the bath dry after use where you can, particularly with hard water, and rinse off any bath products.
Worn enamel only gets rougher with time, and any rust spreads underneath. Resurfacing sooner means less repair work first.
What we cannot put right
Before booking, it’s worth knowing the limits:
- Leaks from fittings rather than the bath
- An acrylic bath that flexes badly underfoot
- A cast iron or steel bath that is cracked right through
Not sure? Send photos and we will give you a straight answer before you book.
Surfaces we repair
- Cast iron baths
- Pressed steel baths
- Basins & shower trays
- Acrylic baths
- Victorian roll-tops
What we do, step by step
A typical visit goes like this: we arrive on time, protect everything around the work area, do the job and clear up. Allow the best part of a day. Before we go, we’ll explain how long to leave it and what to avoid for the first few days.
- First we protect the bathroom and set up ventilation.
- We clean and degrease the bath and repair any chips or rust.
- We key the surface and put on a bonding primer.
- We spray on the new enamel finish in several coats.
- The bath is left to cure and can generally be used the following day.
Preparing for the visit
- Tell us about any previous repairs or coatings
- Mention if the room is upstairs or in a flat
- Avoid using the area for a few hours before we arrive
Get a quote
For a price in Lane End, photos are the quickest way: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Read more
Lane End questions
Can a failed resurfacing be redone?
In most cases. We strip the failing coating and resurface it properly. Tell us about it when you ask for a quote.
Will the price change on the day?
We stop, show you and agree any change before carrying on. Nothing extra is done without your say-so.
Is there a smell?
There is some smell while the coating is applied, so we ventilate the room. It fades as the coating cures.
Will there be a smell?
It depends on the job, but frequently a little. Ventilation keeps it to a minimum, and it soon fades.
What happens next?
You get a fixed quote and available dates. If anything’s unclear, we will ask for another photo.
Do I have to be there?
Yes. We need access to the room while we work, at a time that suits you.
Can you resurface a pink bath in white?
Yes, most people go for white. Tell us what you’d like when you ask for a quote.
How do I get a price for bath re-enamelling in Lane End?
Prices start from £350. We give a fixed price based on photos of the damage. Send a close-up of the damage and a wider photo and your postcode.
Should I try a DIY kit first?
A DIY attempt is not a disaster. We remove the old filler and start again, so it will not stop us repairing it. Just mention it when you send pictures, as it can add time.
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
Other services in Lane End
Common problems we fix in Lane End
Hard water speeds up the wear, and gritty cleaners are the worst culprits.
The most common problems we are called about are:
- A roll-top that is seen better days
- Enamel that is lost its shine and feels rough
- Wear marks under the taps
- A coloured bath you want in white
Comparing quotes
- What protection goes down before work starts
- What happens if they find more damage
- Is the price fixed, and does it include VAT?
- How long it needs to cure
Lane End and the surrounding area
Lane End is about 2 miles north-west of Newport, in Telford and Wrekin. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Lane End is one of 79 towns and villages in Telford and Wrekin we cover. We work right across the region, from Lane End to Birmingham (about 31 miles away).
We work across TF10. Neighbouring places we cover include Edgmond (1 mile south), Longford (2 miles south), Adeney (2 miles south-west), Tibberton (3 miles south-west) and Muxton (4 miles south). Further out, we also cover Telford (8 miles south), Wellington (8 miles south-west), Dawley (9 miles south), Oakengates (7 miles south), The Rock (8 miles south) and Newdale (8 miles south).
Local landmarks in Lane End
Locally, our jobs take us to homes close to Haberdashers' Adams and Church of St Michael and All Angels. A little further out are Weston Jones Motte (3.2 miles north-east). For a walk, there is Aqualate Mere and Quarry Wood.
What affects the price in Lane End
Prices start from £350. Each job gets its own fixed quote. This is what makes a difference:
- What the surface is made of
- Unusual colours or finishes
- Whether it’s a chip, crack, burn or wear
- Where the damage is and how we get to it
It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Quotes from your photos
Phone pictures are fine, there’s no need for anything special. Just ensure we can see:
- Any details about the material
- Details of any past repairs
- Natural light rather than flash
- A photo taken from further back
You do not need a survey visit. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.
What your bath is made of matters
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. It must be solid and not flex underfoot for the finish to last.
Repair or replace: which is better?
Replacing a bath can take several days across several trades. Resurfacing takes one technician and generally a day, with the bath back in use the following day. Resurfacing from £350, with every job priced individually. We don’t add extras on the day. What we quote from your photos is what you pay, unless the damage turns out to be different, in which case we talk to you first.
What you get with us
- CHAS, Constructionline and SafeContractor accredited
- We’ll tell you if it’s not worth repairing
- Colour mixed on the day to match
- No need to remove anything
Read our full price list and guide to resurfacing and replacement costs.
About our accreditations · Every repair comes with a one-year guarantee.
