Telford and Wrekin · England
Bath re-enamelling & resurfacing in Wellington, Telford and Wrekin
Bath re-enamelling in and around Wellington: a fixed quote from photos, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- Enamel that’s lost its shine and feels rough
- An outdated colour you’d like to change
Looking after it afterwards
Nothing complicated is needed:
- Do not leave a chip unrepaired
- Avoid suction-cup mats
- Leave the bath for the full curing time before using it
- A quick wipe after use keeps limescale away
Dry the bath after use if possible, especially in hard water areas, and rinse off any bath products.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Acting earlier keeps the preparation simpler.
Bath re-enamelling in Wellington without replacing anything
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. The finish is sprayed on in several coats over a bonding primer, after the bath has been cleaned, repaired and keyed. Typical jobs include a dull, rough surface that won’t come clean and staining under the taps and around the waste, across basins & shower trays, cast iron baths and Victorian roll-tops.
Whatever the size of the job, you get the same one-year guarantee in Wellington and across Telford and Wrekin.
- Where
- Wellington (TF1, TF6, TF5)
- Area hub
- Telford and Wrekin
- Warranty
- One year on every repair
- Quotes
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
What your bath is made of matters
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Steel frequently rusts by the plughole, so we pay close attention there.
Other services in Wellington
About Wellington
Wellington is about 2 miles west of Telford, in Telford and Wrekin. We travel to customers in Wellington, so nothing has to leave your home. Wellington is one of 79 places in Telford and Wrekin where we work. You can also see our page for Birmingham, about 31 miles away.
Jobs in TF1, TF6 and TF5 work the same way as everywhere else we cover. From West Road, Mill Lane and Bank Road or a nearby road, a technician can come to you. Neighbouring places we cover include Dothill (1 mile north-west), Shawbirch (1 mile north-west), Admaston (2 miles north-west), Bratton (2 miles north-west) and Cross Green (3 miles west). Within a short drive, we also cover Dawley (3 miles south-east), Oakengates (3 miles east), Newport (7 miles north-east), St George’s (3 miles east), Priorslee (4 miles east) and Malinslee (3 miles south-east). As one of the bigger places in Telford and Wrekin, Wellington is somewhere we visit often.
Local landmarks in Wellington
Typical jobs here are in homes near Ercall Wood Academy, Church of All Saints and Short Wood Primary School and the streets around them. Also close by are White Lion Public House (within half a mile west) and Ercall Wood Technology College (0.5 miles south). There’s a railway station in Wellington itself: Wellington (Shropshire) station. Other landmarks nearby include Telford Shopping Centre (3.3 miles south-east) and Princess Royal Hospital (0.8 miles north). The countryside around Wellington includes The Ercall.
Honest limits
Not everything can be repaired, and we’d rather say so up front. Repairs will not solve:
- Steel that has corroded right through
- Leaks from fittings rather than the bath
- An acrylic bath that flexes badly underfoot
Send us pictures and we’ll tell you honestly before booking.
What we work on
- Victorian roll-tops
- Acrylic baths
- Pressed steel baths
- Cast iron baths
- Basins & shower trays
DIY kit or professional repair?
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is usually cheaper.
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and give it the full curing time. If it fails, we can still put it right.
Your questions about bath re-enamelling in Wellington
I rent my home. Can I book you?
We can work for tenants, landlords or agents. Just ensure the landlord agrees.
Do you need to take the bath out?
No. We resurface it in place, so the tiles and taps stay put.
Do you work in Wellington?
Yes. We work across the UK and come to Wellington. Send us photos for a fixed quote, or call 0345 017 0787.
Can I add another job to the visit?
Yes. Doing several items on one visit typically costs less than separate visits. Send photos of everything you’d like done.
What does bath re-enamelling cost?
Resurfacing from £350. We give a fixed price from your pictures. Send a close-up of the damage and a wider photo and your postcode.
How long does re-enamelling last?
That depends on preparation and how the bath is treated. Properly prepared and looked after, it lasts well, and it’s guaranteed for a year.
Can you do the outside of a roll-top?
Yes. Inside and out if you’d like.
Is repairing better than replacing?
Generally, yes. A repair skips the removal, fitting and redecorating. We’ll be honest if it’s not worth it.
Prices and what affects them
Prices start from £350. We do not charge extra for travel to Wellington. The price comes down to:
- Doing more than one item at once
- What kind of damage it is
- How hard the colour is to match
- Previous DIY repairs that have to come out
We do not add extras on the day. What we quote from your photos is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Getting a price from photos
When you take your pictures, a few simple things make all the difference:
- A wider photo showing the whole bath
- One sharp close-up of the damage
- Daylight if possible, and no flash reflection
- Any earlier repairs or coatings
For a price in Wellington, the easiest route is pictures: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.
How the visit works
We begin by going over the job with you, so you know exactly what we are doing. Then the area is sheeted and masked and we start. You can expect it to take a full day, and we will keep you posted as we go.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
How to prepare
- Let us know which floor the room is on
- Open a window if you can
- Make sure the area is dry
Getting a price
Email us a photo of the damage and one of the entire item, and tell us you are in Wellington, and we’ll reply with a fixed price.
Advice
Repair or replace in Wellington?
A replacement often means several trades over several days. Resurfacing takes one technician and normally a day, with the bath back in use the following day. Resurfacing from £350, with every job priced individually. A few things move the price: access, material, the extent of the damage and whether we can do several items together. Send pictures and you’ll get a fixed figure.
Why book with us
- We come to you, anywhere in the UK
- Typically one visit, start to finish
- Straight answers about what a repair can do
- Fixed prices from your pictures
See our full price list and bath cost comparison.
Landlord and trade work in Wellington
Rented homes see more wear and tear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
Landlords, letting agents and housing providers in Wellington use us as well as householders. A repair between tenants keeps the property empty for less time, and it typically costs far less than a refit.
About our accreditations · Every repair comes with a one-year guarantee.
