Wiltshire · England

Bath re-enamelling & resurfacing in Warminster, Wiltshire

Local bath re-enamelling for Warminster: a fixed quote from photos, a tidy visit and a one-year guarantee.

  • Resurfacing from £350
  • Several chips and rust patches
  • A coloured bath you want in white
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath re-enamelling in Warminster

Your questions about bath re-enamelling in Warminster

Can you fix a peeling bath coating?

Generally, yes. The old coating comes off before we resurface it. Tell us about it when you ask for a quote.

Will the price change on the day?

The price is fixed for what the pictures show. Anything extra is discussed before we begin.

Does the bath have to be removed?

No, it stays where it is. We work on the bath in place, with the room protected and ventilated.

How soon can you come?

It depends on the time of year and where you are. Send pictures with your postcode and we’ll reply with the earliest dates.

What information do you need?

Photos of the damage, a picture of the entire bath and your postcode. Then we will agree a date.

Is repairing better than replacing?

Generally, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. If replacing would be better, we will say so.

Can you re-enamel a roll-top bath?

Yes. Inside and out.

Is it OK to have pets in the house?

We ask you to keep children and pets out of the room while we work and until it has cured. Everywhere else in the home is fine.

Bath re-enamelling at your home in Warminster

Resurfacing renews the whole surface of the bath without taking anything out. It’s the answer when the entire bath is tired rather than one spot. Common call-outs are for staining under the taps and around the waste and an outdated colour you’d like to change, in basins & shower trays, cast iron baths and pressed steel baths.

You are covered after we leave: our one-year guarantee applies to every job, and we will explain exactly what it covers when we quote.

Location
Warminster (BA12)
Region
Wiltshire
Guarantee
One year on every repair
Quotes
From £350. Fixed and free, based on pictures
Phone
0345 017 0787
Last updated
23 October 2026
Surface Doctor technician refinishing the outside of a roll-top bath

Repairing versus replacing in Warminster

Replacing a bath usually involves a plumber, a fitter and a tiler. Resurfacing is one technician, normally in a day, and the bath can be used the day after. Prices start from £350. The price depends on how much damage there is and what kind, what it’s made of and how many items we do on one visit. We give a fixed price from your pictures, so there are no surprises on the day.

Why Warminster clients choose us

  • Colours mixed by hand to suit your surface
  • Every repair guaranteed for a year
  • Straight answers about what a repair can do
  • No extra charge for your area

See our prices page and guide to resurfacing and replacement costs.

Repairs by material

Pressed steel

Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.

Cast iron

Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.

What bath re-enamelling costs

Prices start from £350. We do not charge extra for travel to Warminster. The price depends on:

  • Whether we combine several jobs
  • Access to the area
  • The type of damage
  • Unusual colours or finishes

Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send pictures and we’ll give you the exact figure.

Getting a price from photos

A couple of clear pictures is all it takes. It helps if you send:

  • The postcode, so we can plan the visit
  • A coin or ruler next to the damage for scale
  • What it’s made of, if you know
  • A close-up of the damage, in focus

Email us a picture of the damage and a wider shot of the whole item, and tell us you are in Warminster, and we’ll reply with a fixed quote.

How it works

On the day itself, there’s little for you to do. Let us in and show us the room, and we will take it from there. The job generally runs to most of the day, including clearing up.

  1. First we look the bath over and confirm the finish.
  2. Everything around the bath is masked and covered.
  3. We degrease the bath, fix any damage and key the surface.
  4. Primer and finish coats are applied.
  5. We remove the masking, tidy up and give you the curing time.

How to prepare

  • Let us know which floor the room is on
  • Keep a parking space free if you can
  • Clear toiletries, mats and anything else from around the area

Get a quote

There is no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will reply with a fixed price.

Send photos for a quote

Advice

Looking after it afterwards

Aftercare is simple:

  • Dry the bath after use to stop limescale
  • Keep toiletries on a shelf rather than in the bath
  • Repair dripping taps early
  • Do not use the bath until it has fully cured

Dry the bath after use if possible, especially in hard water areas, and rinse away any product left on the surface.

Rust spots on a worn bath get worse with time, and each one adds to the preparation. Resurfacing before they spread keeps it simpler.

When we would advise against a repair

Some problems need a builder, plumber or fitter rather than us:

  • Damage hidden under a previous coating, until it’s stripped back
  • Leaks from fittings rather than the bath
  • Holes rusted through the metal

Send us pictures and we will tell you honestly.

What we work on

  • Acrylic baths
  • Basins & shower trays
  • Victorian roll-tops
  • Pressed steel baths
  • Cast iron baths

For landlords and businesses

Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.

Letting agents frequently send us pictures straight from the inventory. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.

Do you need bath re-enamelling in Warminster?

Enamel’s shine is only skin deep, and every scrub with an abrasive cleaner takes a little away. Eventually the surface turns porous and stains.

If you can see any of these, send us a picture:

  • Stains that will not shift
  • An outdated colour you’d like to change
  • Lots of chips and rust spots
  • A period or roll-top bath worth keeping

What your quote should include

  • Whether they match the colour on site
  • When it can be used again
  • How changes to the job are handled
  • Whether the price is fixed and includes VAT

How to compare quotes

Warminster and the surrounding area

Warminster is about 8 miles south of Trowbridge, in Wiltshire. Whether you’re in the middle of Warminster or on the outskirts, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Warminster is one of 425 towns and villages in Wiltshire we cover.

Jobs in BA12 work the same way as everywhere else we cover. Local streets include High Street, Market Place and Station Road, all of which we cover. You’ll find Warminster on the B3414, so it’s easy for us to reach. Close by, we cover Upton Scudamore (2 miles north), Westbury (4 miles north), Bratton (5 miles north-east), Heywood (6 miles north) and Hawkeridge (6 miles north). Within a short drive, we also cover Trowbridge (8 miles north), Devizes (14 miles north-east), Melksham (12 miles north), Bradford-on-Avon (10 miles north), Paxcroft Mead (8 miles north) and Bowerhill (11 miles north). Warminster is one of the larger places we cover in Wiltshire.

Around Warminster

We visit homes around Christ Church, The Bell And Crown Public House and Warminster School and the streets around them. Also close by are The Minster CofE Primary School (under half a mile north) and Kingdown School (1 mile east). The closest station to Warminster is Warminster station, roughly 0.5 miles north-east. Further afield, we also cover the area around Motte and double ringwork east of Bishopstrow Farm (2 miles east) and Warminster Museum (less than half a mile north-east). Not far away are Shearwater and Cley Hill.

Map of Warminster © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.