Cornwall · England
Bath Re-enamelling in Lanner
Full bath re-enamelling and resurfacing in Lanner, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- Staining under the taps and around the waste
- Several chips and rust patches
DIY kit or professional repair?
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
Bath re-enamelling in Lanner, done in place
The bath stays where it is, so your taps, tiles and plumbing are left alone. It normally takes one visit, and can be used again the day after. Whether it’s a bath in a colour that no longer suits and an old resurfacing that’s failing, we can help, on basins & shower trays, cast iron baths and Victorian roll-tops alike.
All our work is covered by a one-year guarantee, wherever you are in Cornwall.
- Area
- Lanner (TR16)
- Region
- Cornwall
- Warranty
- 12 months on all our work
- Quote
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
How to care for the repair
It’s all simple stuff:
- Have chips seen to early
- Don’t let dyes or oils sit on the finish
- Dry the bath after use to stop limescale
- Keep suction mats out of the bath
Rinse the bath and wipe it over after use, particularly where water is hard, to stop limescale building up.
On a worn bath, rust spots keep spreading. Resurfacing before they spread keeps it simpler.
Lanner and nearby
Lanner is about 2 miles south-east of Redruth, in Cornwall. Jobs in Lanner are booked in like any other job: a fixed quote from your pictures, then a visit to do the work. We cover 644 places in Cornwall, from the larger towns to small villages.
Our visits in TR16 are booked in the same way as anywhere else. Streets in the area include Lanner Square, Ankervis Lane and Tayberry Drive, and we cover them all. If you are just outside Lanner, we cover Pennance (1 mile north-west), Busveal (1 mile north), Church Town (2 miles north-west), Redruth (2 miles north-west) and Carnkie (2 miles west). Larger places within reach include Truro (7 miles north-east), Newquay (15 miles north-east), Falmouth (7 miles south-east), Camborne (4 miles west), Helston (8 miles south) and Hayle (9 miles west).
Local landmarks in Lanner
In Lanner, that means homes near Lanner Primary School, Christchurch Lanner and Redruth School. The nearest railway station is Redruth station, about 1.6 miles north-west. Other landmarks nearby include Carn Brea Castle (1.9 miles west) and Camborne Redruth Community Hospital (2.1 miles north-west). Open spaces near Lanner include Carnmenellis.
Signs you need bath re-enamelling in Lanner
Hard water speeds up the wear, and abrasive cleaners do the most damage.
People normally call us after spotting something like this:
- Staining under the taps and around the waste
- Enamel that’s lost its shine and feels rough
- Lots of chips and rust spots
- Thin, worn enamel in places
What your quote should include
- Whether there are any call-out or travel charges
- Is the price fixed, and does it include VAT?
- How soon you can use it again
- How changes to the job are handled
Lanner questions
Do you work in Lanner?
Yes. We cover the entire UK and travel to Lanner and the rest of Cornwall. Send photos and we’ll quote, or call 0345 017 0787.
Is there a guarantee?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
Do you hold any accreditations?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
What do you need from me?
Some pictures, your postcode and how to reach you. On the day, access to the room.
What happens once I’ve sent photos?
We review the photos and send a fixed quote and the next dates we have.
Is a repair better than a new one?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. We’ll be honest if it’s not worth it.
What if the damage is worse than the pictures show?
Your quote covers the damage in the pictures. Anything extra is discussed before we begin.
Can you do more than one item on the same visit?
Of course, and it generally saves money. Send pictures of everything together and you’ll get one combined price.
When we would advise against a repair
We would rather lose a job than do one that will not last, so these are the limits:
- Anything hidden under an old coating, until we remove it
- A bath split right through the body
- An acrylic bath that flexes badly underfoot
Send us pictures and we will tell you honestly before you book.
Materials we work on in Lanner
- Acrylic baths
- Basins & shower trays
- Pressed steel baths
- Victorian roll-tops
- Cast iron baths
Towns and villages near Lanner
Also in Lanner
Different materials, different repairs
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. The bath needs to be firm and well supported.
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.
Why repair rather than replace?
Replacing a bath usually involves a plumber, a fitter and a tiler. Re-enamelling takes one technician and usually one day, with the bath ready the following day. Resurfacing from £350, with every job priced individually. Set against the cost of replacement, repairing normally costs far less, because there’s no removal, plumbing or making good. The quote lists exactly what you are paying for.
Why us?
- A year’s guarantee on all work
- Free fixed quotes from pictures
- Dust sheets down, tidy finish
- Straight answers about what a repair can do
Take a look at our full price list and resurfacing vs replacement cost guide.
Work for landlords and builders
We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
Builders use us to fix snagging damage before handover. Several plots can be done in one visit.
What we do, step by step
The work is clean and fairly quiet. We protect the area first, then the job itself takes most of the day. Before we leave, we explain the curing time and the aftercare.
- First we protect the bathroom and set up ventilation.
- The bath is cleaned, degreased and any chips or rust repaired.
- We key the surface and put on a bonding primer.
- We spray several coats of new enamel finish.
- Once cured, normally by the day after, the bath is ready.
Preparing for the visit
- Point us to the nearest place to park
- Clear the area around the damage
- Make sure the room can be ventilated
Ask for a price
No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
