Cornwall · England
Bath Re-enamelling for Carn Brea Village homes
We travel to Carn Brea Village for full bath re-enamelling and resurfacing. Everything is done in place, and the work is guaranteed.
- Resurfacing from £350
- Enamel that is lost its shine and feels rough
- Staining under the taps and around the waste
What your bath is made of matters
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so a new finish makes them look new again.
Bath re-enamelling at your home in Carn Brea Village
If your bath is sound but looks tired, re-enamelling is usually the most cost-effective option. It avoids removal, plumbing and re-tiling. We are frequently asked to fix a bath in a colour that no longer suits and worn patches where water runs and sits, in basins & shower trays, Victorian roll-tops and cast iron baths.
We guarantee the work for a year. If something is not right in that time, we come back and put it right.
- Where
- Carn Brea Village (TR15, TR16)
- Area hub
- Cornwall
- Cover
- 12 months on all our work
- Price
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
What affects the price in Carn Brea Village
Resurfacing from £350. There is no charge for travel to Carn Brea Village. The price depends on:
- The size and number of damaged areas
- Any earlier repairs that need removing first
- How hard the colour is to match
- Access to the area
Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Photos let us give you the exact figure.
Getting a price from pictures
Most quotes are done from photos alone. To make it quick:
- Daylight if possible, and no flash reflection
- Any details about the material
- Any earlier repairs or coatings
- A coin beside the damage so we can judge size
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, add your postcode and send them to us. You will get a fixed price, not an estimate.
Should I try a DIY kit first?
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
How the visit works
You don’t need to empty the room beforehand. Everything we use comes in the van with us, lay protective sheets and start once you’re happy with the plan. It normally takes a full day, and you can get on with other things while we’re there.
- The room is masked, protected and ventilated.
- Next we degrease the bath and fix chips and rust spots.
- We key the surface and put on a bonding primer.
- We spray several coats of new enamel finish.
- Once cured, normally by the following day, the bath is ready.
Getting ready for the visit
- Move bottles, mats and clutter away from the area
- Mention any earlier repairs or resurfacing
- Ensure the room can be ventilated
Getting a price
If you are in Carn Brea Village and want a price, pictures are the quickest way: one close up, one from further back, plus your postcode. You will get a fixed quote with dates to choose from.
Related advice
When to call us in Carn Brea Village
Previous coatings can fail too, peeling around the waste or bubbling. Failing coatings are stripped back before we resurface.
Signs it’s time to call us include:
- A bath that stays dull however much you clean it
- Chips and rust in more than one place
- A roll-top that is seen better days
- Wear marks under the taps
Questions to ask before booking
- How the room is protected while they work
- If travel is included in the price
- Whether the price is fixed and includes VAT
- How the colour is matched
Also near Carn Brea Village
What else we do in Carn Brea Village
When we would advise against a repair
To be straight with you, there are a few things a repair will not fix:
- An acrylic bath that flexes badly underfoot
- Anything hidden under an old coating, until we remove it
- Plumbing leaks, which need a plumber
If in doubt, send pictures and we’ll say what we think before you book.
Materials we work on in Carn Brea Village
- Pressed steel baths
- Acrylic baths
- Victorian roll-tops
- Basins & shower trays
- Cast iron baths
Work for landlords and builders
We work for landlords, letting agents and housing providers in Carn Brea Village as well as householders. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
We regularly work with letting and managing agents. Just send photos, the address and how to get access.
Questions from Carn Brea Village
Is there a smell?
Some odour is normal while we spray, which is why we ventilate the bathroom. It clears as the finish cures.
How long does re-enamelling take?
One day for most baths and can be used the day after. We’ll confirm timings when we quote.
Can you repair several things at once?
Yes. Doing several items on one visit usually costs less than separate visits. Include pictures of each item.
Will the price change on the day?
The price is fixed for what the photos show. Anything extra is discussed before we begin.
Can you re-enamel a roll-top bath?
Yes, often. The inside is resurfaced, and we can refinish the outside as well.
Is it messy?
No. The work area is masked and covered, and we take our waste away with us.
Do you do work for letting agents?
Yes, frequently. We can quote for several properties together and work between tenancies.
Is my repair covered?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
Looking after it afterwards
Looking after the surface is easy:
- Wipe the bath dry after use in hard water areas
- Have chips seen to early
- Never use suction bath mats
- Clean with a soft cloth and mild detergent
Wipe the bath dry after use where you can, and rinse away any product left on the surface.
Rust spots on a worn bath get worse with time, and each one adds to the preparation. Resurfacing before they spread keeps it simpler.
Where we work around Carn Brea Village
Carn Brea Village is about 1 mile south-west of Redruth, in Cornwall. We agree a date that works for you, and you will know when to expect us, so there’s no waiting around. Carn Brea Village is one of 644 places in Cornwall where we work.
Here we cover the TR15 and TR16 postcode area. Whether you live on Coach Lane, Trevingey Road and Chyandour or anywhere nearby, a technician can come to you. If you’re just outside Carn Brea Village, we cover Church Town (1 mile east), Tolskithy (1 mile north-west), Plain-an-Gwarry (1 mile north), Illogan Highway (1 mile west) and Redruth (1 mile north-east). Further out, we also cover Truro (9 miles east), Newquay (15 miles north-east), Falmouth (9 miles south-east), Camborne (3 miles west), Penzance (15 miles south-west) and Helston (9 miles south).
What’s near Carn Brea Village
Our clients here include homes close to Trewirgie Infants' School, Pool Academy and Church of St Euny and the streets around them. You will also find Redruth School (0.6 miles north) and The Railway Inn (0.8 miles west). Carn Brea Village’s nearest station is Redruth station, about 0.8 miles north-east of the centre. Well-known places in the area include Kerrier (2.6 miles west) and Camborne Redruth Community Hospital (less than half a mile north-west). Not far away are Carnmenellis.
About our accreditations · Every repair comes with a one-year guarantee.
