Lancashire · England
Bath re-enamelling & resurfacing in Lea, Lancashire
Problem with your bath in Lea? We put it right where it is, mix the colour on the day and back it with a one-year guarantee.
- Resurfacing from £350
- Chips and rust in more than one place
- A coloured bath you want in white
About Lea
Lea is about 2 miles west of Ashton-on-Ribble, in Lancashire. From the centre of Lea to the outlying streets, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Lea is one of 482 places in Lancashire where we work. We work right across the region, from Lea to Liverpool (26 miles away).
Every address in PR2 and PR4 is covered. From Lea Road, Tudor Avenue and Darkinson Lane or a nearby road, we can come to you. We also cover the places around Lea: Lea Town (1 mile west), Larches (1 mile east), Cottam (1 mile north-east), Ingol (2 miles north-east) and Lower Bartle (2 miles north). Larger places within reach include Preston (3 miles east), Chorley (10 miles south-east), Lytham St Anne's (10 miles west), Bamber Bridge (5 miles south-east), Leyland (6 miles south-east) and Skelmersdale (15 miles south).
Around Lea
In Lea, that means homes near St Bernard's Catholic Primary School, St. Christopher's Church and Ashton Park and the streets around them. You’ll also find Pig & Whistle pub (less than half a mile south-east) and Ashton Community Science College (1 mile east). The closest station to Lea is Salwick station, roughly 2 miles north-west. Well-known places in the area include Preston Castle (1.9 miles east) and Church Cottage (3.3 miles north-east).
- Parks and local facilities nearby include Tulketh (2.6 miles east)
About our bath re-enamelling in Lea
Many of the baths we re-enamel are period roll-tops, which would be difficult and expensive to replace. Doing them in place keeps an original feature. We work on basins & shower trays, cast iron baths and acrylic baths, and the jobs we see most are a bath in a colour that no longer suits and a dull, rough surface that won’t come clean.
All our work comes with our one-year guarantee.
- Location
- Lea (PR2, PR4)
- Area hub
- Lancashire
- Warranty
- 12 months on all our work
- Quotes
- From £350. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Looking after it afterwards
Simple care helps the repair last. We recommend:
- Dry the bath after use to stop limescale
- Don’t use the bath until it has fully cured
- Stick to gentle, non-abrasive cleaners
- Get any chip repaired quickly
Wait for the curing time we give you before the first bath. Then, gentle cleaning with a soft cloth is enough.
Leave a peeling coating alone. Moisture gets underneath and makes it worse, so it’s better to have it stripped and redone.
Landlord and trade work in Lea
We carry out planned and one-off repairs for housing associations and facilities teams in Lancashire and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.
Repairs by material
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so a new finish makes them look new again.
Common questions in Lea
Are you a vetted contractor?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Do you resurface freestanding baths?
Yes, frequently. We resurface the inside, and the outside can be refinished too.
How do I get a price for bath re-enamelling in Lea?
Resurfacing from £350. Because every job differs, we price from photos. You’ll get a fixed figure before booking.
Can you repair something that’s been repaired before?
Yes, we often do. It can add a little time, which we include in the quote.
What happens after I send pictures?
We come back with a fixed price. There’s no obligation to book.
How long does re-enamelling last?
That depends on preparation and how the bath is treated. With good preparation and gentle cleaning it lasts a long time, and it’s guaranteed for a year.
Is it worth repairing rather than replacing?
Generally, yes. A repair skips the removal, fitting and redecorating. If it is not worth repairing, we’ll tell you.
Do you do work for letting agents?
Yes, often. We quote for multiple addresses and fit around tenancy changeovers.
How it works
You don’t need to empty the room. Everything we use comes in the van with us, lay protective sheets and get going once we’ve agreed what we are doing. It generally takes a full day, and you can get on with other things while we are there.
- First we protect the bathroom and set up ventilation.
- The bath is cleaned, degreased and any chips or rust repaired.
- We prepare the surface and apply a bonding primer.
- We spray on the new enamel finish in several coats.
- Once cured, normally by the following day, the bath is ready.
Preparing for the visit
- Tell us about any previous repairs or coatings
- Mention any parking restrictions or tricky access
- Ensure the area is dry
How to get a price
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, add your postcode and send them to us. What comes back is a fixed price, not a guess.
Advice
Repair or replace: which is better?
When the bathroom is fine apart from the bath’s finish, re-enamelling is the least disruptive fix. Nothing else is disturbed. Resurfacing from £350, with every job priced individually. The price depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. We give a fixed quote from your pictures, so there are no surprises on the day.
Why choose Surface Doctor in Lea
- Most jobs done in one visit
- A year’s guarantee on all work
- A fixed quote before you book
- Dust sheets down, tidy finish
Read our pricing and bath cost comparison.
How we price bath re-enamelling
Resurfacing from £350. Each job gets its own fixed quote. These are the things that affect it:
- Previous DIY repairs that have to come out
- How much damage there is
- The material
- Unusual colours or finishes
A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you’ll get a fixed figure.
Send photos for a quote
The better the pictures, the more accurate the price. Here’s what helps:
- The postcode, so we can plan the visit
- Details of any past repairs
- Any details about the material
- Daylight if possible, and no flash reflection
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed price without visiting.
What we’re called out for in Lea
A dull surface stains and holds dirt, and cleaning harder only makes it worse. At that stage, resurfacing is the fix.
Look out for these signs:
- An original cast iron bath that needs restoring
- Enamel that’s lost its shine and feels rough
- A peeling or bubbling previous coating
- Thin, worn enamel in places
Comparing quotes
- A fixed price, and whether VAT is included
- How to look after the finish
- How your room will be protected
- When it can be used again
More services for Lea
Should I try a DIY kit first?
For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send photos.
About our accreditations · Every repair comes with a one-year guarantee.
