Lancashire · England
Bath Re-enamelling for Higher Bartle homes
Damaged bath in Higher Bartle? We put it right where it is, mix the colour on the day and back it with a one-year guarantee.
- Resurfacing from £350
- A peeling or bubbling previous coating
- Lots of chips and rust spots
How we handle bath re-enamelling in Higher Bartle
The bath stays where it is, so the taps, tiles and plumbing are not touched. It generally takes one visit, with the bath ready to use the following day. Typical jobs include wear marks under the taps and chips and rust in more than one place, on acrylic baths, Victorian roll-tops and basins & shower trays.
You get a one-year guarantee, the same in Higher Bartle as everywhere else we work.
- Area
- Higher Bartle (PR4)
- Region
- Lancashire
- Warranty
- A year, on every repair
- Price
- From £350. Free, fixed price from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Repairing versus replacing in Higher Bartle
Replacing a bath typically involves a plumber, a fitter and a tiler. Re-enamelling takes one technician and normally one day, and the bath can be used the day after. Resurfacing from £350, with every job priced individually. Compared with replacing, repairing typically costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you are paying for.
Why us?
- No need to remove anything
- Technicians who travel to you, UK-wide
- Colours mixed by hand to suit your surface
- Free fixed quotes from pictures
Take a look at our prices page and resurfacing vs replacement cost guide.
What we do, step by step
We agree an arrival time beforehand. Once we are there, the work takes most of the day for most jobs. We leave the room clean and you will know when it can be used.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures.
Getting ready for the visit
- Open a window if you can
- Point us to the nearest place to park
- Mention any parking restrictions or tricky access
How to get a price
There’s no need for us to visit first. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed quote.
Related advice
About Higher Bartle
Higher Bartle is about 2 miles west of Fulwood, in Lancashire. Book a date that suits you, and you’ll know when to expect us, so you’re not left waiting in all day. Higher Bartle is one of 482 places in Lancashire where we work. We work right across the region, from Higher Bartle to Liverpool (about 28 miles away).
Every address in PR4 is covered. Streets in the area include William Young Way, Freesia Avenue and Tabley Lane, and we cover them all. Neighbouring places we cover include Ingol (1 mile south-east), Cottam (1 mile south-west), Lower Bartle (1 mile west), Fulwood (2 miles east) and Cadley (2 miles south-east). Larger places within reach include Preston (3 miles south-east), Chorley (11 miles south-east), Lytham St Anne's (11 miles west), Bamber Bridge (6 miles south-east), Leyland (7 miles south) and Fleetwood (14 miles north-west).
What’s near Higher Bartle
Typical jobs here are in homes near Haslam Park, Pool House Community Primary School and St Anne's Church and the streets around them. You will also find The Wheatsheaf pub (0.7 miles north) and Broughton High School (1.4 miles north-east). Higher Bartle’s nearest station is Salwick station, about 2.7 miles west of the centre. Nearby you will also find Royal Preston Hospital (1.9 miles east) and Church Cottage (1.7 miles north-east).
- Other local spots include Tulketh (2.7 miles south-east)
What a repair can’t fix
A few problems are outside what a surface repair can do:
- Leaks from fittings rather than the bath
- A cast iron or steel bath that is cracked right through
- Acrylic that moves when you stand in it
If in doubt, send pictures and we will say what we think.
Materials we work on in Higher Bartle
- Cast iron baths
- Victorian roll-tops
- Pressed steel baths
- Basins & shower trays
- Acrylic baths
Your questions about bath re-enamelling in Higher Bartle
Will the bath be moved?
No, it stays where it is. We work on the bath in place, with the room protected and ventilated.
Can you fix a peeling bath coating?
Normally, yes. We strip the failing coating and resurface it properly. Mention it when you send pictures.
Can you redo someone else’s repair?
Normally, yes. The old repair comes out first, so mention it when you send photos.
Is the work guaranteed?
All our work carries a one-year guarantee. We will explain what it covers when we quote.
Will it make a mess?
No. The work area is masked and covered, and we leave the room clean.
Does someone need to be in?
Someone needs to let us in and show us the job. You do not need to watch us work.
How long will the bath be out of use?
One day for most baths, ready the day after. We give you timings with the quote.
Do you resurface freestanding baths?
Yes, roll-tops are a big part of our work. The inside is resurfaced, and we can refinish the outside as well.
What else we do in Higher Bartle
Prices and what affects them
Resurfacing from £350. You will know the full cost before you book. We take into account:
- The type of damage
- How many items we do on one visit
- Whether old repairs or coatings need taking off
- Unusual colours or finishes
A repair is priced on what needs doing, not your postcode. You will see the full price before booking, with nothing added on the day.
Quotes from your pictures
You can usually get a fixed price without us visiting. To help us price it:
- A clear, close picture of the problem area
- A coin beside the damage so we can judge size
- A photo taken from further back
- Details of any past repairs
The quickest way to a price is to send a couple of photos using our quote form or ring us. We will say right away whether it can be repaired.
When to call us in Higher Bartle
Hard water speeds up the wear, and abrasive cleaners do the most damage.
The most common problems we are called about are:
- Enamel that’s lost its shine and feels rough
- Lots of chips and rust spots
- An original cast iron bath that needs restoring
- A coating lifting around the plughole
What your quote should include
- Whether there are any call-out or travel charges
- What happens if the damage is worse than the pictures show
- How your room will be protected
- What aftercare is recommended
Aftercare tips
Much of the damage we repair could have been avoided. These habits help:
- Don’t let dyes or oils sit on the finish
- Keep suction mats out of the bath
- Don’t leave bottles, razors or sponges standing on the surface
- Clean with a soft cloth and mild detergent
Treat the new finish gently at first: give it the full curing time, then clean it gently. From then on, avoid abrasives and suction mats.
If a previous coating is starting to peel, don’t pick at it. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.
DIY repairs versus a professional job
We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
What your bath is made of matters
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
About our accreditations · Every repair comes with a one-year guarantee.
