Kent · England
Bath re-enamelling & resurfacing in Lenham Heath, Kent
Damaged bath in Lenham Heath? We put it right where it is, mix the colour on the day and back it with a one-year guarantee.
- Resurfacing from £350
- Chips and rust in more than one place
- A peeling or bubbling previous coating
Bath re-enamelling in Lenham Heath, done in place
Cast iron and steel baths are ideal for re-enamelling, and we can resurface acrylic baths as well. You end up with a smooth, glossy surface. Typical jobs include a bath that stays dull however much you clean it and a bath in a colour that no longer suits, in pressed steel baths, acrylic baths and basins & shower trays.
You’re covered for a year from the day of the repair. If anything isn’t right, ring us and we’ll come back.
- Where
- Lenham Heath (ME17)
- Region
- Kent
- Cover
- A year, on every repair
- Quote
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Landlords, agents and businesses in Lenham Heath
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
For developers and builders, we fix damage before handover. Several plots can be done in one visit to keep costs down.
Nearby places to Lenham Heath
Other services in Lenham Heath
Lenham Heath: your questions answered
Can you repair something that is been repaired before?
Yes, regularly. Removing the old work can add time, and that is in the quote.
Someone resurfaced my bath and it’s peeling. Can you help?
Typically, yes. The old coating comes off before we resurface it. Mention it when you send pictures.
Are there extra charges for Lenham Heath?
No. Our quotes include travel, with the same prices everywhere we work.
Do you come to Lenham Heath?
We do. We send a technician to Lenham Heath for every job, and the price is the same as everywhere else.
Will the new finish last?
That depends on preparation and how the bath is treated. Properly prepared and looked after, it lasts well, and our work is guaranteed for a year.
Will the price change on the day?
The price is fixed for what the photos show. Anything extra is discussed before we begin.
How long will the bath be out of use?
Usually a day, then it’s ready to use the following day. A badly pitted bath can need a second day.
Does someone need to be in?
Yes. The technician needs access to the room for the visit, at a time that suits you.
What a repair cannot fix
To be straight with you, some problems need a different fix:
- Steel that has corroded right through
- A cast iron or steel bath that’s cracked right through
- Leaking taps or wastes (a plumber’s job)
Not sure? Send pictures and we’ll give you a straight answer before you book.
What we work on
- Basins & shower trays
- Cast iron baths
- Pressed steel baths
- Victorian roll-tops
- Acrylic baths
Lenham Heath and the surrounding area
Lenham Heath is about 8 miles north-west of Ashford, in Kent. Book a date that suits you, and we’ll give you an arrival time in advance, so there is no waiting around. We work in 922 places across Kent. We work right across the region, from Lenham Heath to London (about 41 miles away).
Every address in ME17 is covered. Streets in the area include Lenham Forstal Road, Crabtree Lane and Rose Lane, and we cover them all. Nearby, we also work in Lenham Forstal (1 mile north-west), Charing Heath (1 mile south-east), Stonebridge Green (1 mile south), Leadingcross Green (2 miles north-west) and Lenham (2 miles north-west). Further out, we also cover Maidstone (10 miles west), Ashford (8 miles south-east), Canterbury (15 miles east), Sittingbourne (9 miles north), Faversham (9 miles north-east) and Minster (14 miles north).
Local landmarks in Lenham Heath
Our clients here include homes close to The Red Lion Inn, Church of the Holy Trinity and The Lenham School. For rail, the closest station is Lenham station, about 2 miles north-west. Well-known places in the area include Coldbridge Castle (2.4 miles south-west).
How to care for the repair
Aftercare is simple:
- Keep suction mats out of the bath
- Rinse off hair dye, oils and bath bombs straight away
- Don’t use the bath until it has fully cured
- Store bottles off the bath
Stick to mild, non-abrasive cleaners, do not use suction bath mats, and keep bottles and razors off the surface.
Rust spots on a worn bath get worse with time, and each one adds to the preparation. Resurfacing before they spread keeps it simpler.
Materials and what they mean for the repair
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Rust around the waste is common on steel, so we pay close attention there.
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
When to call us in Lenham Heath
The gloss on enamel is thin, and every scrub with an abrasive cleaner takes a little away. After years of use, the surface becomes porous and stains easily.
You may need us if you’ve spotted any of these:
- A peeling or bubbling previous coating
- Chips and rust in more than one place
- A roll-top that’s seen better days
- Brown or grey marks that don’t clean off
Comparing quotes
- Whether the price covers travel
- The length of the guarantee and what it covers
- What happens if the damage is worse than the pictures show
- What protection goes down before work starts
The process
We begin by going over the job with you, so you know exactly what we’re doing. Then the area is sheeted and masked and the work begins. You can expect it to take the best part of a day, and we’ll keep you posted as we go.
- First we protect the bathroom and set up ventilation.
- We clean and degrease the bath and repair any chips or rust.
- We key the surface and put on a bonding primer.
- We spray several coats of new enamel finish.
- The bath is left to cure and can generally be used the day after.
Getting ready for the visit
- Plan for the room to be out of bounds to pets and children
- Mention any earlier repairs or resurfacing
- Open a window if you can
How to get a price
Upload pictures of the damage and one of the whole item, and tell us you’re in Lenham Heath, and we’ll come back with a fixed quote.
Advice
Prices and what affects them
Resurfacing from £350. We do not charge extra for travel to Lenham Heath. The price comes down to:
- How hard the colour is to match
- Where the damage is and how we get to it
- The type of damage
- How many items we do on one visit
What it costs depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. We give a fixed quote from your pictures, so there are no surprises on the day.
Send pictures for a quote
Most quotes are done from pictures alone. To make it quick:
- Details of any past repairs
- Good light, ideally daylight, without flash glare
- One picture of the entire bath
- A coin or ruler next to the damage for scale
There is no need for us to visit first. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we will reply with a fixed quote.
DIY kit or professional repair?
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
About our accreditations · Every repair comes with a one-year guarantee.
