Kent · England
Bath Re-enamelling for Charing Heath homes
Full bath re-enamelling and resurfacing for homeowners, landlords and businesses in Charing Heath. Send photos for a free, fixed quote.
- Resurfacing from £350
- Stains that will not shift
- A bath in a colour that no longer suits
What happens on the day
We agree an arrival time beforehand, so you know when to expect us. On site, it takes a full day in most cases. The room is left tidy and you will know when it can be used.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Before we arrive
- Keep pets and children out of the room while we work
- Point us to the nearest place to park
- Avoid using the area for a few hours before we arrive
Get a quote
There’s no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.
Read more
About our bath re-enamelling in Charing Heath
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. Several coats of finish go on over a bonding primer, once the bath has been cleaned, repaired and prepared. We work on pressed steel baths, Victorian roll-tops and cast iron baths, and the jobs we see most are an outdated colour you’d like to change and a period or roll-top bath worth keeping.
We guarantee the work for a year. If something is not right in that time, we come back and put it right.
- Location
- Charing Heath (TN27)
- County
- Kent
- Guarantee
- A year, on every repair
- Quotes
- From £350. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
What your bath is made of matters
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Repair or replace in Charing Heath?
Replacing a bath can take several days across several trades. Re-enamelling is one technician, normally one day, with the bath back in use the following day. Resurfacing from £350, with every job priced individually. The price depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. We give a fixed price from your photos, so there are no surprises on the day.
What you get with us
- One visit for most repairs
- Honest advice, even when it means no job
- A year’s guarantee on all work
- CHAS, Constructionline and SafeContractor accredited
Read our full price list or bath cost comparison.
Landlords, agents and businesses in Charing Heath
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.
We carry out planned and one-off repairs for housing associations and facilities teams. A repair avoids taking out and refitting, which is easier on the people living there.
Charing Heath: your questions answered
What happens after I send photos?
You will get a fixed quote back, normally with dates to choose from. There’s no obligation to book.
Is repairing better than replacing?
Usually, if the item is otherwise sound. A repair avoids removal and making good. We’ll tell you honestly if replacement makes more sense.
Do the materials smell?
It depends on the job, but often a little. Ventilation keeps it to a minimum.
How do I get a price for bath re-enamelling in Charing Heath?
Prices start from £350. The exact price depends on the damage, so we quote from pictures. You know the full cost before anything is booked.
Do you come to Charing Heath?
Yes. We work across the UK and travel to Charing Heath. Send us pictures for a fixed quote, or call 0345 017 0787.
Does someone need to be in?
Yes. We need access to the room while we work, at a time that suits you.
Is it messy?
We protect the room with dust sheets and masking first, and we clean up when we have finished.
What information do you need?
Just pictures, your postcode and a contact number. On the day, we only need access to the room.
Do you need bath re-enamelling in Charing Heath?
By the time a bath is a few decades old, it may have a mix of issues: dull areas, chips, rust and staining. Resurfacing sorts them out together.
The most common problems we’re called about are:
- Enamel that’s lost its shine and feels rough
- Several chips and rust patches
- Wear marks under the taps
- A coloured bath you want in white
Before you book anyone
- How long the guarantee is and what it covers
- Aftercare advice
- Who turns up on the day
- What preparation is included
Charing Heath and nearby
Charing Heath is about 7 miles north-west of Ashford, in Kent. Jobs in Charing Heath are booked in like any other job: a fixed price from your pictures, and a technician at your door on the day. We cover all 922 towns and villages across Kent, from the larger towns to small villages. Our nearest city page is London, about 42 miles away.
Jobs in TN27 work the same way as everywhere else we cover. From Wind Hill Lane, Cherry Tree Road and Charing Heath Road or anywhere nearby, we can come to you. We also cover the places around Charing Heath: Lenham Heath (1 mile north-west), Stonebridge Green (1 mile south-west), Lenham Forstal (1 mile north-west), Charing (1 mile east) and Cold Harbour (2 miles north). Within a short drive, we also cover Maidstone (11 miles west), Ashford (7 miles south-east), Canterbury (15 miles east), Sittingbourne (9 miles north), Whitstable (15 miles north-east) and Faversham (9 miles north-east).
What’s near Charing Heath
Around Charing Heath, we work in homes near The Red Lion Inn and Church of the Holy Trinity. The closest station to Charing Heath is Charing station, about 1.2 miles east of the centre. Other landmarks nearby include Coldbridge Castle (2.9 miles west).
Can I fix it myself?
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
What we cannot put right
Some problems need a builder, plumber or fitter rather than us:
- Holes rusted through the metal
- A metal bath with a through crack
- Leaks from fittings rather than the bath
Not sure? Send photos and we will give you a straight answer.
Materials we work on in Charing Heath
- Victorian roll-tops
- Cast iron baths
- Pressed steel baths
- Basins & shower trays
- Acrylic baths
How to look after the repair
So the finish stays in good condition for years:
- Don’t leave a chip unrepaired
- Don’t use the bath until it has fully cured
- Clean with a soft cloth and mild detergent
- Don’t leave bottles, razors or sponges standing on the surface
Rinse away dyes, oils and bath bombs straight after use, because they can mark the finish. Repair dripping taps promptly.
Do not try to scrub a worn bath back to shine. It just wears the enamel further and makes resurfacing more work.
Also near Charing Heath
What else we do in Charing Heath
About our accreditations · Every repair comes with a one-year guarantee.
