Somerset · England
Bath Re-enamelling in Limington
Full bath re-enamelling and resurfacing for homes and businesses in Limington and across Somerset. Send photos for a free, fixed quote.
- Resurfacing from £350
- Thin, worn enamel in places
- Enamel that’s lost its shine and feels rough
Should you replace it?
Getting a cast iron bath out is hard work: it’s very heavy, may need breaking up, and the replacement can be costly. Re-enamelling avoids all of it. Our bath re-enamelling starts from £350. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you will get a fixed figure.
Why us?
- Colour-matched on site
- We will tell you if it’s not worth repairing
- CHAS, Constructionline and SafeContractor accredited
- Same prices wherever you are
Read our full price list and guide to resurfacing and replacement costs.
Bath re-enamelling at your home in Limington
We re-enamel plenty of period and roll-top baths, which would be difficult and expensive to replace. Doing them in place keeps an original feature. If you’re dealing with a coloured bath you want in white and staining under the taps and around the waste, we can help, whatever the material.
Peace of mind is built in: our one-year guarantee applies to every job, and we explain what it covers before you book.
- Location
- Limington (BA22)
- Region
- Somerset
- Cover
- A year, on every repair
- Quotes
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
DIY kit or professional repair?
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it does not stop a professional repair. Just mention it when you send pictures, as it can add time.
If you are set on a kit, follow its instructions closely and work on a clean, dry surface, and don’t use it until it has fully cured. If it fails, we can still put it right.
How we price bath re-enamelling
Resurfacing from £350. Quotes are free and the price is fixed. What we look at:
- Unusual colours or finishes
- Whether we combine several jobs
- Access to the area
- The type of damage
The price reflects the work involved, not where you live. The full price is agreed before you book, with no extras added later.
Quotes from your pictures
We price nearly every job from pictures. This is what we need:
- Where you are, by postcode
- Good light, ideally daylight, without flash glare
- What it’s made of, if you know
- A close-up of the damage, in focus
You don’t need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed quote.
Where we work around Limington
Limington is about 4 miles north of Yeovil, in Somerset. We visit customers in Limington and the surrounding area, so you do not need to take anything anywhere. Limington is one of 640 towns and villages in Somerset we cover.
Here we cover the BA22 postcode area. From Duck Lane, Church Street and Mill Lane or anywhere nearby, a technician can come to you. We also travel to Chilthorne Domer (2 miles south-west), Yeovil Marsh (2 miles south), Lower Vagg (2 miles south), Mudford Sock (2 miles south-east) and Coppits Hill (2 miles south). Larger places within reach include Yeovil (4 miles south), Wells (15 miles north), Shepton Mallet (14 miles north), Street (9 miles north-west), Glastonbury (11 miles north) and Crewkerne (10 miles south-west).
Around Limington
Around Limington, we work in homes near Lamb & Lark pub and St Mary's Church. For rail, the closest station is Yeovil Pen Mill station, about 4.2 miles south-east. A little further out are Yeovil Hospital (3.8 miles south). The countryside around Limington includes Babylon Hill.
Signs you need bath re-enamelling in Limington
In hard water areas, limescale and the cleaning it needs wear enamel faster, and gritty cleaners are the worst culprits.
Send us a photo if you notice any of these:
- An outdated colour you’d like to change
- A coating lifting around the plughole
- Thin, worn enamel in places
- Brown or grey marks that do not clean off
Comparing quotes
- How the room is protected while they work
- How long it needs to cure
- What the guarantee covers, and for how long
- Whether cleaning and preparation are in the price
When we’d advise against a repair
It helps to know what we can’t do too:
- Acrylic that moves when you stand in it
- Damage hidden under a previous coating, until it’s stripped back
- Holes rusted through the metal
If in doubt, send photos and we will say what we think.
Materials we repair
- Acrylic baths
- Victorian roll-tops
- Basins & shower trays
- Pressed steel baths
- Cast iron baths
How it works
Your technician turns up when we said we would, introduces themselves and looks over the damage before anything else. Dust sheets and masking tape go down before any work starts. The work itself takes most of the day, and the room is left clean and tidy.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure until the next day.
Getting ready for the visit
- Open a window if you can
- Tell us if there are stairs or a lift
- Plan for the room to be out of bounds to pets and children
Get a quote
Most customers in Limington get their price from photos. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.
Read more
Work for landlords and builders
Letting agents frequently send us pictures straight from the inventory. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
Landlords, letting agents and housing providers in Limington use us as well as homeowners. Repairing between tenancies keeps void periods short, and it generally costs far less than a refit.
Also near Limington
Also in Limington
What your bath is made of matters
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that’s what we repair.
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Your questions about bath re-enamelling in Limington
How much does bath re-enamelling cost in Limington?
Prices start from £350. Because every job differs, we price from pictures. You will get a fixed figure before you book.
Is it OK to have pets in the house?
We ask you to keep children and pets out of the room while we work. The rest of the house is unaffected.
Is a repair better than a new one?
Generally, when the rest is in good condition. A repair avoids removal and making good. If replacing would be better, we will say so.
Can you make a coloured bath white?
Yes, most people go for white. Mention the colour you want when you send pictures.
I rent my home. Can I book you?
We can work for tenants, landlords or agents. Get your landlord’s agreement first.
What happens next?
We review the pictures and send a fixed quote.
Are you accredited?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Will there be a smell?
It depends on the job, but often a little. Ventilation keeps it to a minimum, and it soon fades.
About our accreditations · Every repair comes with a one-year guarantee.
