Hampshire · England
Bath re-enamelling & resurfacing in Linwood, Hampshire
Full bath re-enamelling and resurfacing for homes and businesses in Linwood and across Hampshire. Free, fixed quotes from your photos.
- Resurfacing from £350
- Stains that won’t shift
- A period or roll-top bath worth keeping
What your bath is made of matters
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s the part we put right.
Bath re-enamelling in Linwood, done in place
Re-enamelling gives a worn bath a new glossy surface without taking anything out. It suits baths that are dull, stained, rough or chipped all over. Our technicians work on basins & shower trays, cast iron baths and pressed steel baths, and common reasons people contact us are chips and rust in more than one place and a coloured bath you want in white.
Whatever the size of the job, you get the same one-year guarantee.
- Area
- Linwood (BH24)
- Area hub
- Hampshire
- Cover
- A year, on every repair
- Price
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Aftercare tips
Most damage we see is avoidable. A few tips:
- Do not leave a chip unrepaired
- Respect the curing time we give you
- Clean with a soft cloth and mild detergent
- Rinse off hair dye, oils and bath bombs immediately
Dry the bath after use if possible, particularly with hard water, and rinse away any product left on the surface.
Do not try to scrub a worn bath back to shine. It removes more of the surface and makes resurfacing more work.
What we’re called out for in Linwood
The gloss on enamel is thin, and every scrub with an abrasive cleaner takes a little away. Eventually the surface turns porous and stains.
It’s worth getting a quote if you see:
- A period or roll-top bath worth keeping
- Enamel that is lost its shine and feels rough
- Stains that won’t shift
- A peeling or bubbling previous coating
What your quote should include
- How changes to the job are handled
- The length of the guarantee and what it covers
- What aftercare is recommended
- Whether there are any call-out or travel charges
Your questions about bath re-enamelling in Linwood
Is it messy?
No. The work area is masked and covered, and we take our waste away with us.
Is there a call-out fee?
Travel is included in the price, and we charge the same wherever you are.
Is it safe with children and pets around?
Just keep them out of the work area. We will tell you when the room can be used again.
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as householders.
What if the damage is worse than the pictures show?
The price is fixed for what the pictures show. If there is more, we’ll tell you before starting.
How do I book?
A close-up, a wider photo and your postcode. After that, we just agree a date.
Can you resurface a pink bath in white?
Yes. Coloured baths can be resurfaced in white, and we can do the rest of the suite as well.
Can I get a quote without a visit?
Nearly always. We only ask to see it in person if the pictures can’t show what we need.
Where we work around Linwood
Linwood is about 6 miles east of Verwood, in Hampshire. We work in every kind of home, old or new, large or small, plus businesses and rented homes. We work in 683 places in Hampshire.
Our technicians cover all of the BH24 postcode area and the streets around it. We also cover the places around Linwood: South Gorley (2 miles west), Mockbeggar (2 miles west), Highwood (2 miles south-west), Rockford (2 miles south-west) and Hangersley (2 miles south-west). Further out, we also cover Totton (10 miles east), Lymington (12 miles south-east), Romsey (13 miles north-east), Hythe (15 miles east), New Milton (10 miles south) and Ringwood (3 miles south-west).
What’s near Linwood
Well-known places in the area include Fordingbridge Doll Museum (3.6 miles north-west) and Godshill Castle Hill (4.1 miles north). Open spaces near Linwood include Linbrook Lake and Blashford Lakes.
DIY repairs versus a professional job
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
Also near Linwood
What else we do in Linwood
Honest limits
Before booking, it’s worth knowing the limits too:
- Plumbing leaks, which need a plumber
- Damage hidden under a previous coating, until it’s stripped back
- A poorly supported acrylic bath, until it’s firmed up
If in doubt, send pictures and we’ll say what we think before booking.
What we work on
- Acrylic baths
- Basins & shower trays
- Victorian roll-tops
- Pressed steel baths
- Cast iron baths
Why repair rather than replace?
Replacing a bath usually involves a plumber, a fitter and a tiler. Re-enamelling takes one technician and usually one day, and the bath can be used the day after. Resurfacing from £350, with every job priced individually. What it costs depends on the type and amount of damage, what it’s made of and how many items we do on one visit. We give a fixed quote from your photos, so there are no surprises on the day.
Why book with us
- A fixed quote before booking
- We leave the room as we found it
- We come to you, anywhere in the UK
- CHAS and Constructionline accredited
Read our prices page and resurfacing vs replacement cost guide.
What affects the price in Linwood
Resurfacing from £350. We do not charge extra for travel to Linwood. The price comes down to:
- How easy the damage is to reach
- How many items we do on one visit
- What the surface is made of
- The size and number of damaged areas
Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.
How to get a fixed quote
When you take your pictures, these tips help us give you a firm price:
- The material, if you know it
- Your postcode, so we can check dates
- Good light, ideally daylight, without flash glare
- Any earlier repairs or coatings
A quote takes minutes to ask for: photograph the damage, then the entire bath, add your postcode and send them over. What comes back is a fixed quote, not a guess.
How the visit works
It’s a tidy, low-fuss visit. We agree the arrival time in advance, protect the area, then carry out the work, which normally takes the best part of a day. If anything looks different from your pictures, we’ll talk to you before going ahead.
- The room is masked, protected and ventilated.
- We clean and degrease the bath and repair any chips or rust.
- We key the surface and put on a bonding primer.
- Several coats of new finish are sprayed on.
- The bath is left to cure and can generally be used the following day.
Before we arrive
- Mention if the room is upstairs or in a flat
- Let us know about parking or access
- Plan for the room to be out of bounds to pets and children
Getting a price
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed price.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
