North Yorkshire · England
Bath Re-enamelling for Little Fencote homes
Damaged bath in Little Fencote? We put it right where it is, mix the colour on the day and back it with a one-year guarantee.
- Resurfacing from £350
- A dull, rough surface that will not come clean
- A coloured bath you want in white
When to call us in Little Fencote
Sometimes it’s an earlier resurfacing that has failed, lifting by the plughole or blistering. Failing coatings are stripped back before we resurface.
Common reasons people in Little Fencote contact us include:
- Several chips and rust patches
- A dull, rough surface that won’t come clean
- A coloured bath you want in white
- Brown or grey marks that do not clean off
What to look for in a quote
- What aftercare is recommended
- Whether the colour is mixed to match
- The length of the guarantee and what it covers
- Is the price fixed, and does it include VAT?
Bath re-enamelling in Little Fencote without replacing anything
When a bath is structurally fine but worn out on the surface, resurfacing is normally the best value. There is no removal, plumbing or tiling involved. We work on acrylic baths, pressed steel baths and basins & shower trays, and people most often call us about thin, worn enamel in places and brown or grey marks that don’t clean off.
Every job is backed for twelve months in Little Fencote and everywhere else. We return to put right any problem with the work.
- Area
- Little Fencote (DL7)
- Region
- North Yorkshire
- Guarantee
- One year on every repair
- Quotes
- From £350. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Places near Little Fencote
Other services in Little Fencote
Your questions about bath re-enamelling in Little Fencote
How do I get a price for bath re-enamelling in Little Fencote?
Prices start from £350. Because every job differs, we price from pictures. You will get a fixed figure before you book.
I rent my home. Can I book you?
Of course. Check with your landlord; we can send the quote to them too.
Do you resurface freestanding baths?
Yes. Inside and out if you’d like.
How do I book?
A close-up, a wider photo and your postcode. Then we will agree a date.
Is there any odour?
There may be a mild smell during the work.
Can you change the colour of my bath?
Yes, white is the usual choice. Mention the colour you want when you send pictures.
Can pets and children be at home?
We ask you to keep children and pets out of the room while we work and until it has cured. The rest of the house is unaffected.
Will there be fumes?
Yes, while we are applying the finish. We set up ventilation and the smell fades as it cures.
Repairs by material
Acrylic
Acrylic baths can be resurfaced too, using a system that bonds to acrylic. It must be solid and not flex underfoot for the finish to last.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Should you replace it?
A refit takes several trades and several days. Resurfacing is one technician, normally in a day, with the bath ready the day after. Our bath re-enamelling starts from £350. What it costs depends on the type and amount of damage, what it’s made of and how many items we do on one visit. We give a fixed quote from your photos, so you know the cost before booking.
Why us?
- Every repair guaranteed for a year
- No need to remove anything
- Same prices wherever you are
- Honest advice, even when it means no job
See our prices page or bath cost comparison.
What we can’t put right
Some jobs are not right for a repair, for example:
- An acrylic bath that flexes badly underfoot
- A metal bath with a through crack
- Steel that has corroded right through
If in doubt, send photos and we will say what we think.
What we work on
- Acrylic baths
- Victorian roll-tops
- Cast iron baths
- Basins & shower trays
- Pressed steel baths
How the visit works
Your technician turns up when we said we would, introduces themselves and looks over the damage before anything else. Dust sheets and masking tape go down before any work starts. The work itself takes a full day, and we leave the room as we found it.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure until the following day.
How to prepare
- Clear the area around the damage
- Mention any earlier repairs or resurfacing
- Let us know which floor the room is on
Ask for a price
We price from photos so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we will come back with a fixed figure.
Advice
Landlords, agents and businesses in Little Fencote
If you manage property in Little Fencote, we will quote for several properties at once. Just send pictures for each address and we’ll price them together.
Builders use us to fix snagging damage before handover, saving last-minute replacements. Several plots can be done in one visit.
DIY kit or professional repair?
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it will not stop us repairing it. Just mention it when you send pictures, as it can add time.
What bath re-enamelling costs
Prices start from £350. We price every job individually, from your pictures. What matters most is:
- Doing more than one item at once
- How easy the damage is to reach
- How hard the colour is to match
- What kind of damage it is
Compared with replacing, repairing normally costs far less, because there is no removal, plumbing or making good. The quote lists exactly what you’re paying for.
Quotes from your photos
Before you send photos, these tips help us give you a firm price:
- Any details about the material
- Your postcode, so we can check dates
- A photo taken from further back
- A clear, close picture of the problem area
You don’t need a survey visit. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we will reply with a fixed price.
Our work in Little Fencote
Little Fencote is about 6 miles west of Northallerton, in North Yorkshire. Jobs in Little Fencote are booked in like any other job: a fixed price from your photos, and a technician at your door on the day. We work in all 626 towns and villages across North Yorkshire. We work right across the region, from Little Fencote to Leeds (about 36 miles away).
Every address in DL7 is within our area, from the main roads to the quietest streets. That includes homes on Crank Lane, Hergill Lane and Fleetham Lane. We also travel to Great Fencote (1 mile north), Kirkby Fleetham (1 mile north), Scruton (1 mile east), Leeming Bar (2 miles south) and Little Langton (2 miles north-east). Further out, we also cover Ripon (14 miles south), Catterick Garrison (6 miles north-west), Northallerton (6 miles east), Richmond (8 miles north-west), Thirsk (11 miles south-east) and Colburn (6 miles north-west).
Around Little Fencote
Our customers here include homes close to St Andrew's and Kirkby Fleetham Church of England Primary School, among other places. A little further out are Bedale Museum (3.1 miles south) and Friarage Hospital (5.6 miles east).
About our accreditations · Every repair comes with a one-year guarantee.
