Staffordshire · England
Bath Re-enamelling for Little Hay homes
Problem with your bath in Little Hay? We put it right where it is, mix the colour on the day and back it with a one-year guarantee.
- Resurfacing from £350
- Thin, worn enamel in places
- A coating lifting around the plughole
Prices and what affects them
Resurfacing from £350. We charge the same across the UK, including Little Hay. What changes the price is:
- Unusual colours or finishes
- Any earlier repairs that need removing first
- The size and number of damaged areas
- How many items we do on one visit
We charge the same wherever you are, with no extra for Little Hay. The job itself decides the price: how much damage, what it’s made of and how many items.
Getting a price from photos
We price nearly every job from pictures. This is what to send:
- Any details about the material
- One sharp close-up of the damage
- Good light, ideally daylight, without flash glare
- A coin or ruler next to the damage for scale
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job the same day in most cases.
Bath re-enamelling at your home in Little Hay
We re-enamel plenty of period and roll-top baths, which are heavy, hard to move and costly to replace. Doing them in place keeps an original feature. Our repair technicians work on Victorian roll-tops, cast iron baths and pressed steel baths, and common reasons people get in touch are several chips and rust patches and a period or roll-top bath worth keeping.
We guarantee the work for a year. If there is a problem with the repair within the year, we return and sort it.
- Where
- Little Hay (WS14)
- Region
- Staffordshire
- Warranty
- One year on every repair
- Quote
- From £350. Free and fixed, from your photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Towns and villages near Little Hay
Other services in Little Hay
Our work in Little Hay
Little Hay is about 4 miles north of Royal Sutton Coldfield, in Staffordshire. We travel to homes and businesses in Little Hay and the surrounding area, so nothing has to leave your home. We cover 512 places in Staffordshire. We work right across the region, from Little Hay to Birmingham (11 miles away).
Here we cover the WS14 postcode area. We also cover the places around Little Hay: Shenstone Woodend (1 mile west), Footherley (1 mile west), Shenstone (1 mile north-west), Lower Stonnall (2 miles west) and Swinfen (2 miles north). Further out, we also cover Burton upon Trent (15 miles north-east), Tamworth (6 miles east), Cannock (10 miles north-west), Lichfield (4 miles north), Rugeley (11 miles north-west) and Burntwood (6 miles north-west).
Local landmarks in Little Hay
Typical jobs here are in homes near The Hollybush pub and The Arthur Terry School, among other places. For rail, the closest station is Blake Street station, roughly 1.4 miles south-west of the centre. Further afield, we also cover the area around Letocetum Roman Baths And Museum (2.9 miles north-west) and Good Hope Hospital (3.7 miles south). For a walk, there is Barr Beacon and Bourne Pool.
When we would advise against a repair
We won’t take on work that won’t last, so these are the limits:
- Plumbing leaks, which need a plumber
- A poorly supported acrylic bath, until it’s firmed up
- Anything hidden under an old coating, until we remove it
Send us photos and we will tell you honestly before you book.
Materials we repair
- Basins & shower trays
- Acrylic baths
- Victorian roll-tops
- Cast iron baths
- Pressed steel baths
Little Hay: your questions answered
Do I have to be there?
Yes. We need access to the room while we work, at a time we agree with you.
Do you work for landlords and businesses?
Yes, frequently. We quote for multiple addresses and fit around tenancy changeovers.
Do you resurface freestanding baths?
Yes, roll-tops are a big part of our work. We resurface the inside, and the outside can be refinished too.
Do you cover Little Hay?
We do. Repair technicians travel to Little Hay from across the region, and the price is the same as everywhere else.
Is the work guaranteed?
All our work carries our one-year guarantee. Ask us what it covers when you get your quote.
Can you do more than one item on the same visit?
Yes. Doing several items on one visit usually costs less than separate visits. Include pictures of each item.
Do you hold any accreditations?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Is there a call-out fee?
No. Our quotes include travel, with the same prices everywhere we work.
How it works
Once we are through the door, we keep the work contained to the one room. We mask off everything nearby, the job takes a full day, depending on what we find, and we finish by cleaning up and talking you through the result.
- The room is masked, protected and ventilated.
- We clean and degrease the bath and repair any chips or rust.
- The surface is prepared and a bonding primer applied.
- We spray several coats of new enamel finish.
- We leave it to cure, and it’s generally ready the next day.
Before we arrive
- Move bottles, mats and clutter away from the area
- Make sure the area is dry
- Point us to the nearest place to park
How to get a price
For a price in Little Hay, the easiest route is pictures: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Related advice
Signs you need bath re-enamelling in Little Hay
The gloss on enamel is thin, and abrasive cleaning slowly wears it away. After years of use, the surface becomes porous and stains easily.
The things clients usually mention when they call are:
- Staining under the taps and around the waste
- Several chips and rust patches
- A coloured bath you want in white
- A coating lifting around the plughole
Before you book anyone
- Whether cleaning and preparation are in the price
- How changes to the job are handled
- How long it needs to cure
- How the room is protected while they work
Keeping it looking good
Once the work has cured, treat it gently:
- Rinse off hair dye, oils and bath bombs right away
- Wipe the bath dry after use in hard water areas
- Do not use the bath until it has fully cured
- Have chips seen to early
The first few days matter most: give it the full curing time, then clean it gently. From then on, avoid abrasives and suction mats.
Do not try to scrub a worn bath back to shine. It removes more of the surface.
Can I fix it myself?
If you are set on a kit, follow its instructions closely and work on a clean, dry surface, and do not use it until it has fully cured. If it does not work out, we can still repair it properly.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.
Work for landlords and builders
Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.
We work for landlords, letting agents and housing providers in Little Hay as well as homeowners. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
Materials and what they mean for the repair
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
About our accreditations · Every repair comes with a one-year guarantee.
