Gwynedd · Wales
Bath Re-enamelling for Llanddwywe-is-y-graig homes
Problem with your bath in Llanddwywe-is-y-graig? We put it right where it is, mix the colour on the day and back it with a one-year guarantee.
- Resurfacing from £350
- A coloured bath you want in white
- Chips and rust in more than one place
Aftercare tips
To keep it looking its best for years:
- Clean with a soft cloth and mild detergent
- Do not leave a chip unrepaired
- Don’t leave bottles, razors or sponges standing on the surface
- Do not let dyes or oils sit on the finish
The first few days matter most: give it the full curing time, then clean it gently. From then on, avoid abrasives and suction mats.
Leave a peeling coating alone. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.
About our bath re-enamelling in Llanddwywe-is-y-graig
Cast iron and steel baths are ideal for re-enamelling, and acrylic baths can be resurfaced too. You end up with a smooth, glossy surface. Whether it’s lots of chips and rust spots and wear marks under the taps, we can usually put it right.
Peace of mind is built in: our one-year guarantee applies to every job, and we explain what it covers before you book.
- Where
- Llanddwywe-is-y-graig (LL43, LL44)
- Region
- Gwynedd
- Cover
- A year, on every repair
- Price
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
What we can’t put right
To be straight with you, some problems need a different fix:
- An acrylic bath that flexes badly underfoot
- Damage hidden under a previous coating, until it’s stripped back
- Holes rusted through the metal
Not sure? Send pictures and we’ll give you a straight answer before booking.
What we work on
- Basins & shower trays
- Cast iron baths
- Victorian roll-tops
- Pressed steel baths
- Acrylic baths
Common questions in Llanddwywe-is-y-graig
Will the price change on the day?
Your quote covers the damage in the pictures. Anything extra is discussed before we begin.
Is repairing better than replacing?
Typically, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. We will tell you honestly if replacement makes more sense.
Do I have to be there?
Yes. We need access to the room while we work, at a time we agree with you.
What do you need from me?
Just photos, your postcode and a contact number. On the day, we only need access to the room.
Is it messy?
Dust sheets and masking go down before we start, and we clean up when we have finished.
Is there a smell?
There is some smell while the coating is applied, so we ventilate the room. It fades as the coating cures.
Can you re-enamel a roll-top bath?
Yes, frequently. We resurface the inside, and the outside can be refinished too.
Can a failed resurfacing be redone?
In most cases. The old coating comes off before we resurface it. Mention it when you send pictures.
How it works
We agree an arrival time beforehand, so you know when to expect us. Once we’re there, the work takes most of the day in most cases. We leave the room clean and you will know when it can be used.
- The room is masked, protected and ventilated.
- Next we degrease the bath and fix chips and rust spots.
- We key the surface and put on a bonding primer.
- We spray several coats of new enamel finish.
- The bath is left to cure and can typically be used the day after.
Getting ready for the visit
- Point us to the nearest place to park
- Move bottles, mats and clutter away from the area
- Let us know about parking or access
How to get a price
No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we’ll come back with a fixed figure.
Read more
DIY repairs versus a professional job
If you do try a kit, read the instructions carefully, and don’t use it until it has fully cured. If it does not work out, we can still repair it properly.
We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.
What we’re called out for in Llanddwywe-is-y-graig
Enamel does not fail overnight. Years of cleaning, hard water and hot baths wear the gloss away, normally first under the taps and around the waste.
Get in touch if you’ve noticed any of these:
- Wear marks under the taps
- Staining under the taps and around the waste
- Lots of chips and rust spots
- A bath in a colour that no longer suits
Before booking anyone
- Whether they match the colour on site
- Whether there are any call-out or travel charges
- How to look after the finish
- Whether the price is fixed and includes VAT
Also near Llanddwywe-is-y-graig
Also in Llanddwywe-is-y-graig
About Llanddwywe-is-y-graig
Llanddwywe-is-y-graig is about 26 miles north of Aberystwyth, in Gwynedd. We agree a date that works for you, and we will give you an arrival time in advance, so you’re not left waiting in all day. We cover all 165 towns and villages across Gwynedd. You can also see our page for Liverpool, about 64 miles away.
We cover every part of LL43 and LL44. Jobs here include addresses on Ffordd Gors and Ffordd Tyddyn Felin and the roads around them. Close by, we cover Gwynedd (1 mile north-west), Dyffryn Ardudwy (1 mile west), Llanddwywe (1 mile west), Tal-y-bont (1 mile south-west) and Llanaber (3 miles south). Further out, we also cover Tywyn (14 miles south), Dolgellau (8 miles east), Porthmadog (10 miles north), Pen-dre (14 miles south), Criccieth (11 miles north-west) and Ffestiniog (15 miles north-east).
What’s near Llanddwywe-is-y-graig
Typical jobs here are in homes near St Dwywe's Church, Ysgol Dyffryn Ardudwy and Ysgethin Inn, among other places. The closest station to Llanddwywe-is-y-graig is Talybont station, about 1.2 miles south-west of the centre. Further afield, we also cover the area around Erwr Castell (1.8 miles north-west). Not far away are Moelfre and Llyn Irddyn.
Landlord and trade work in Llanddwywe-is-y-graig
Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We will fit around changeovers where we can.
We work for landlords, letting agents and housing providers in Llanddwywe-is-y-graig as well as householders. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
Materials and what they mean for the repair
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we pay close attention there.
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
What affects the price in Llanddwywe-is-y-graig
Prices start from £350. There’s no area surcharge for Llanddwywe-is-y-graig. The price reflects:
- Access to the area
- The size and number of damaged areas
- Doing more than one item at once
- What kind of damage it is
Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.
Getting a price from photos
Photographing the damage takes a minute. Please include:
- Details of any past repairs
- The material, if you know it
- Daylight if possible, and no flash reflection
- Where you are, by postcode
There’s no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed quote.
About our accreditations · Every repair comes with a one-year guarantee.
