Powys · Wales

Bath re-enamelling & resurfacing in Llangors, Powys

We travel to Llangors for full bath re-enamelling and resurfacing. Nothing is taken out, and the work is guaranteed.

  • Resurfacing from £350
  • Several chips and rust patches
  • A bath in a colour that no longer suits
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling near Llangors

About our bath re-enamelling in Llangors

Re-enamelling is a one-day job for most baths. Taps, tiles, panels and plumbing all stay in place. We’re frequently asked to fix worn patches where water runs and sits and brown or grey marks that don’t clean off, across acrylic baths, Victorian roll-tops and pressed steel baths.

You are covered for a year from the day of the repair. Just call us if there’s a problem and we will sort it.

Location
Llangors (LD3)
Area hub
Powys
Guarantee
One year on every repair
Quotes
From £350. Free and fixed, from your photos
Telephone
0345 017 0787
Updated
23 October 2026
Before and after: an old basin refinished to bright white

Different materials, different repairs

Acrylic

Acrylic baths can be resurfaced too, using a system that bonds to acrylic. The bath needs to be firm and well supported for the finish to last.

Pressed steel

Steel baths re-enamel well, once any rust has been treated. Steel frequently rusts by the plughole, so we check it carefully.

Signs you need bath re-enamelling in Llangors

Older baths frequently have several problems at once: worn patches, chips, rust spots and stains. Re-enamelling deals with all of them in one go.

Contact us if you’ve noticed any of these:

  • An old resurfacing that’s failing
  • A dull, rough surface that will not come clean
  • Worn patches where water runs and sits
  • An original cast iron bath that needs restoring

Questions to ask before booking

  • Whether the colour is mixed to match
  • Who will actually do the work
  • Whether the price covers travel
  • What protection goes down before work starts

How to compare quotes

When we would advise against a repair

It helps to know what we cannot do:

  • An acrylic bath that flexes badly underfoot
  • Leaking taps or wastes (a plumber’s job)
  • Anything hidden under an old coating, until we remove it

Not sure? Send photos and we will give you a straight answer before booking.

Materials we work on in Llangors

  • Victorian roll-tops
  • Pressed steel baths
  • Basins & shower trays
  • Cast iron baths
  • Acrylic baths

Can I fix it myself?

A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.

A DIY attempt is not a disaster. We take the old repair out and do it properly, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send pictures.

Our work in Llangors

Llangors is about 11 miles north of Ebbw Vale, in Powys. We agree a date that works for you, and we’ll give you an arrival time in advance, so there’s no waiting around. We cover 234 places in Powys. Our nearest city page is Birmingham, about 68 miles away.

Jobs in LD3 work the same way as everywhere else we cover. If you are just outside Llangors, we cover Llanfihangel Tal-y-llyn (2 miles west), Talybont-on-Usk (3 miles south-west), Bwlch (3 miles south), Cwmdu (3 miles south-east) and Llanfrynach (4 miles west). Further out, we also cover Brecon (6 miles west), Llanfaes (6 miles west), Crughywel (7 miles south-east), Pendre (6 miles west) and Llangynidr (5 miles south).

Local landmarks in Llangors

In Llangors, that means homes near Castle Inn, Llangors V.P. School and Church Of St Paulinus, among other places. A little further out are Howell Harris Museum (2.9 miles north) and Twmpan Motte (1.4 miles south-west). Green spaces nearby include Llangorse Lake and Mynydd Llangorse.

Map of Llangors © OpenStreetMap contributors

Aftercare tips

After the repair has cured, a few habits help it last:

  • Stick to gentle, non-abrasive cleaners
  • Don’t leave bottles, razors or sponges standing on the surface
  • Avoid suction-cup mats
  • Dry the bath after use to stop limescale

Wait for the curing time we give you before the first bath. After that, a soft cloth and washing-up liquid is all it needs.

The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Resurfacing sooner means less repair work first.

How we price bath re-enamelling

Prices start from £350. A fixed quote means you know the cost before you book. We take into account:

  • How easy the damage is to reach
  • Doing more than one item at once
  • Previous DIY repairs that have to come out
  • Whether it’s a chip, crack, burn or wear

What it costs depends on how much damage there is and what kind, the material and how many items we do on one visit. You get a fixed quote from your photos, so you know the cost before booking.

Quotes from your photos

It only takes a minute to photograph the damage, and it saves a visit. Try to send:

  • A wider photo showing the whole bath
  • Good light, ideally daylight, without flash glare
  • The material, if you know it
  • Whether it’s been repaired or coated before

You don’t need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will reply with a fixed quote.

Landlords, agents and businesses in Llangors

We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.

For anyone letting property in or around Llangors, we will quote for several properties at once. Just send pictures for each address and we’ll price them together.

What we do, step by step

The work is clean and fairly quiet, so you can stay at home while we’re there. Protection goes down first, then the work takes a full day. At the end we talk you through the curing time and the aftercare.

  1. First we look the bath over and confirm the finish.
  2. Everything around the bath is masked and covered.
  3. The bath is degreased, repaired and keyed.
  4. Primer and finish coats are applied.
  5. The masking comes off, we tidy up and tell you when it can be used.

Preparing for the visit

  • Clear the area around the damage
  • Ensure the room can be ventilated
  • Let us know if it has been repaired before

Getting a price

Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed price.

Get a fixed price

Related advice

Llangors: your questions answered

Do I have to be there?

We need someone to let us in. You do not need to watch us work.

Will you leave a mess?

No. The work area is masked and covered, and we leave the room clean.

Can pets and children be at home?

Just keep them out of the work area. We will tell you when the room can be used again.

How long does re-enamelling take?

Usually one day, with the bath ready the day after. Deeply pitted baths may need a second day.

What happens once I’ve sent photos?

You will get a fixed quote back, plus dates. There is no obligation to book.

How long does re-enamelling last?

Care for it and it lasts. Gentle cleaning, no suction mats.

What do you need from me?

Some photos, your postcode and how to reach you. On the day, access to the room.

What if the damage is worse than the photos show?

We stop, show you and agree any change before carrying on. Nothing extra is done without your say-so.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.