Monmouthshire · Wales
Bath Re-enamelling in Llanvihangel Crucorney
Fixed-price bath re-enamelling in Llanvihangel Crucorney and the surrounding area, done in a single visit in most cases.
- Resurfacing from £350
- A roll-top that’s seen better days
- An outdated colour you’d like to change
Bath re-enamelling in Llanvihangel Crucorney without replacing anything
Cast iron and steel baths are ideal for re-enamelling, and we can resurface acrylic baths as well. The result is a smooth, even, glossy finish. Common call-outs are for wear marks under the taps and a bath that stays dull however much you clean it, on pressed steel baths, Victorian roll-tops and cast iron baths.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Area
- Llanvihangel Crucorney (NP7)
- Area hub
- Monmouthshire
- Guarantee
- 12 months on all our work
- Price
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
What bath re-enamelling costs
Resurfacing from £350. There are no hourly rates or hidden extras. The price is based on:
- Whether we combine several jobs
- The type of damage
- Previous DIY repairs that have to come out
- The material and finish
Compared with replacing, a repair is typically a fraction of the price, because there is no removal, plumbing or making good. The quote lists exactly what you are paying for.
How to get a fixed quote
A couple of clear pictures is all it takes. It helps if you send:
- Details of any past repairs
- A picture taken from further back
- Good light, ideally daylight, without flash glare
- A close-up of the damage, in focus
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath, we can price the job without visiting.
Repairs by material
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so a new finish makes them look new again.
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Steel frequently rusts by the plughole, so we pay close attention there.
Landlords, agents and businesses in Llanvihangel Crucorney
We regularly work with letting and managing agents. Send the address, photos and access details and we’ll arrange it.
We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
Common problems we fix in Llanvihangel Crucorney
Hard water speeds up the wear, and gritty cleaners are the worst culprits.
Typical reasons for a call-out include:
- A bath that stays dull however much you clean it
- An old resurfacing that is failing
- Chips and rust in more than one place
- Wear marks under the taps
What your quote should include
- What the guarantee covers, and for how long
- What aftercare is recommended
- What preparation is included
- How the colour is matched
Our work in Llanvihangel Crucorney
Llanvihangel Crucorney is about 4 miles north of Abergavenny, in Monmouthshire. Across the NP7 area, we come to you. We cover 115 places across Monmouthshire, from the larger towns to small villages. Our nearest city page is Birmingham, about 61 miles away.
Here we cover the NP7 postcode area. Streets in the area include Chapel Grove and Clôs Bryn Sgyryd, all of which we cover. Nearby, we also work in Werngifford (1 mile north-east), Pandy (1 mile north-east), Llandeilo Bertholau (3 miles south), Llanvetherine (3 miles south-east) and Caggle Street (3 miles south-east). Further out, we also cover Abergavenny (4 miles south), Monmouth (12 miles south-east), Pen-y-pound (4 miles south-west), Cantref (4 miles south-west), Grofield (5 miles south-west) and Overmonnow (12 miles south-east).
Near you in Llanvihangel Crucorney
Typical jobs here are in homes near The Skirrid Mountain Inn, St. Michael and All Angels and Llanfihangel Crucorney C.P. School. The nearest railway station is Abergavenny station, about 4.7 miles south. Nearby you’ll also find Pen y Clawdd Castle (1.2 miles south-west) and Maindiff Court Hospital (3.5 miles south). The countryside around Llanvihangel Crucorney includes Pen Llwygy and White Castle moat.
DIY repairs versus a professional job
If you do try a kit, read the instructions carefully, and do not use it until it has fully cured. If it does not work out, we can still repair it properly.
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send photos.
Repair or replace: which is better?
For a sound bath, resurfacing costs far less than replacement, when you count removal, plumbing, tiling and decorating. It’s much quicker too. Resurfacing from £350, with every job priced individually. Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send photos and we’ll give you the exact figure.
What you get with us
- Every repair guaranteed for a year
- CHAS and Constructionline accredited
- Colour-matched on site
- Nothing taken out or refitted
Read our pricing and guide to resurfacing and replacement costs.
FAQs for Llanvihangel Crucorney
What do you need from me?
A close-up, a wider photo and your postcode. Then we’ll agree a date.
Is the work guaranteed?
Every repair comes with our one-year guarantee. Ask us what it covers when you get your quote.
Will there be fumes?
Yes, while we are applying the finish. We set up ventilation and the smell fades as it cures.
Will there be a smell?
There can be some smell while we work, so we ventilate the room. It clears as the materials cure.
How long does re-enamelling last?
A well-prepared finish lasts a long time if it’s looked after. Avoid abrasive cleaners and suction mats.
Is it worth repairing rather than replacing?
Usually, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. If replacing would be better, we’ll say so.
Someone resurfaced my bath and it’s peeling. Can you help?
Generally, yes. We strip the failing coating and resurface it properly. Mention it when you send photos.
How long does re-enamelling take?
Typically one day, with the bath ready the following day. Deeply pitted baths may need a second day.
Looking after it afterwards
Good habits make a big difference to how long a repair lasts:
- Don’t leave a chip unrepaired
- A dripping tap should be fixed promptly
- Leave the bath for the full curing time before using it
- Wipe the bath dry after use in hard water areas
Dry the bath after use if possible, especially in hard water areas, and rinse away any product left on the surface.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface and makes resurfacing more work.
How it works
The work is clean and fairly quiet, so you can carry on at home. Protection goes down first, then the job itself takes most of the day. At the end we talk you through how soon it can be used and how to care for it.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Before we arrive
- Mention any parking restrictions or tricky access
- Tell us about any previous repairs or coatings
- Avoid using the area for a few hours before we arrive
Ask for a price
The quickest way to a price is to send two or three pictures through our quote form or call us. We will say right away if a repair is the right fix.
Read more
Nearby places to Llanvihangel Crucorney
More services for Llanvihangel Crucorney
About our accreditations · Every repair comes with a one-year guarantee.
