Herefordshire · England
Bath Re-enamelling in Walterstone Common
Bath re-enamelling for Walterstone Common, without a refit. Get a fixed price from your pictures, then book a visit.
- Resurfacing from £350
- Enamel that is lost its shine and feels rough
- Worn patches where water runs and sits
Bath re-enamelling in Walterstone Common without replacing anything
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. Several coats of finish go on over a bonding primer, after the bath has been cleaned, repaired and keyed. If you’re dealing with a bath in a colour that no longer suits and a bath that stays dull however much you clean it, we can help, whatever the material.
The work is covered for a year after we finish. If anything is not right, ring us and we’ll come back.
- Where
- Walterstone Common (HR2)
- Region
- Herefordshire
- Warranty
- A year, on every repair
- Quote
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
The process
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, cover and mask the work area, and get on with the job, which typically takes a full day. If we find something your pictures didn’t show, we will explain it before carrying on.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Before we arrive
- Open a window if you can
- Have somewhere for us to park nearby if possible
- Avoid using the area for a few hours before we arrive
How to get a price
Pricing is simple: take a close-up of the damage and a picture from further back, send them to us with your postcode, and you’ll get a fixed quote back. There is no charge for the quote and no obligation.
Read more
Signs you need bath re-enamelling in Walterstone Common
Previous coatings can fail too, peeling around the waste or bubbling. We strip what’s failing and start again.
Typical reasons for a call-out include:
- Brown or grey marks that don’t clean off
- A bath that stays dull however much you clean it
- An original cast iron bath that needs restoring
- Wear marks under the taps
What your quote should include
- When it can be used again
- Who turns up on the day
- Whether there are any call-out or travel charges
- Whether the price is fixed and includes VAT
What a repair can’t fix
To be straight with you, some problems need a different fix:
- Steel that has corroded right through
- A cast iron or steel bath that’s cracked right through
- A poorly supported acrylic bath, until it’s firmed up
If in doubt, send photos and we’ll say what we think before you book.
Materials we repair
- Basins & shower trays
- Cast iron baths
- Pressed steel baths
- Acrylic baths
- Victorian roll-tops
Your questions about bath re-enamelling in Walterstone Common
How long does re-enamelling last?
It depends on preparation, use and care. Properly prepared and looked after, it lasts well, and it’s guaranteed for a year.
Someone resurfaced my bath and it’s peeling. Can you help?
Yes. Removing the old finish takes extra time, which we include in the price.
What happens next?
We check the damage, the material and your postcode, then reply with a quote and the next dates we have.
Do you do work for letting agents?
We do, regularly. We can quote for several properties together and work between tenancies.
Is the work guaranteed?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
Do you charge for travel?
Travel is included in the price, and we charge the same wherever you are.
Will there be a smell?
Expect a mild smell while we are working that clears as it cures.
Can you do the outside of a roll-top?
Yes, roll-tops are a big part of our work. The inside is resurfaced, and we can refinish the outside as well.
Also near Walterstone Common
Other services in Walterstone Common
What your bath is made of matters
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Cracks are strengthened from behind before the front is finished.
DIY repairs versus a professional job
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is usually the cheaper route.
We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
For landlords and businesses
Landlords, letting agents and housing providers in Walterstone Common use us as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
Letting agents frequently send us pictures straight from the inventory. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
Our work in Walterstone Common
Walterstone Common is about 7 miles north-east of Abergavenny, in Herefordshire. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. Walterstone Common is one of 255 towns and villages in Herefordshire we cover. We work right across the region, from Walterstone Common to Birmingham (58 miles away).
All of HR2 is covered, from the main roads to the quietest streets. If you’re just outside Walterstone Common, we cover Rowlestone (2 miles east), Clodock (2 miles north-west), Longtown (3 miles north-west), Lower Maes-coed (3 miles north) and Abbey Dore (4 miles north-east). Further out, we also cover Hereford (13 miles north-east), Ross-on-Wye (15 miles east), Redhill (12 miles north-east), Newton Farm (12 miles north-east), Merrivale (15 miles east) and Whitecross (13 miles north-east).
Landmarks near Walterstone Common
Locally, our jobs take us to homes close to Church of St Mary and the streets around them. Other landmarks nearby include Great Hunthouse Mound (0.7 miles north-west). The countryside around Walterstone Common includes The Parks and Campston Hill.
What bath re-enamelling costs
Prices start from £350. Each job gets its own fixed price. This is what makes a difference:
- The type of damage
- The material
- Access to the area
- The colour and finish to match
It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Send pictures for a quote
Almost every job we do is priced from pictures. This is what we need:
- The postcode, so we can plan the visit
- Something in shot to show the size
- Good light, ideally daylight, without flash glare
- What it’s made of, if you know
For most jobs, pictures are all we need to give you a price. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.
Repair or replace in Walterstone Common?
Replacing a bath can take several days across several trades. Resurfacing takes one technician and normally a day, with the bath back in use the following day. Resurfacing from £350, with every job priced individually. Compared with replacing, repairing typically costs far less, because there’s no removal, plumbing or making good. The quote lists exactly what you are paying for.
Why Walterstone Common customers choose us
- Free fixed quotes from pictures
- Colour mixed on the day to match
- Same prices wherever you are
- CHAS, Constructionline and SafeContractor accredited
Take a look at our pricing or bath cost comparison.
About our accreditations · Every repair comes with a one-year guarantee.
