Powys · Wales

Bath Re-enamelling for Llysdinam homes

Fixed-price bath re-enamelling in Llysdinam and the surrounding area, done in a single visit in most cases.

  • Resurfacing from £350
  • Staining under the taps and around the waste
  • An outdated colour you’d like to change
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling in Llysdinam

What we do, step by step

You don’t need to empty the room. Everything we use comes in the van with us, put protection down and start once you’re happy with the plan. Most jobs take the best part of a day, and you can get on with other things while we’re there.

  1. We sheet, mask and ventilate the room.
  2. Old sealant is cut out and the bath is deep cleaned.
  3. Chips, rust and pitting are repaired.
  4. The surface is keyed and primed for the new finish.
  5. The new finish is sprayed on in several coats and left to cure until the following day.

Before we arrive

  • Have a window or extractor fan available
  • Ensure the area is dry
  • Let us know which floor the room is on

Getting a price

No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through.

Get a fixed price

Read more

About our bath re-enamelling in Llysdinam

Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. The finish is sprayed on in several coats over a bonding primer, after the bath has been cleaned, repaired and keyed. Common call-outs are for staining under the taps and around the waste and a peeling or bubbling previous coating, in Victorian roll-tops, basins & shower trays and acrylic baths.

You’re covered after we leave: our one-year guarantee applies to every job, and we explain what it covers before booking.

Area
Llysdinam (LD1, LD2)
Area hub
Powys
Guarantee
12 months on all our work
Quotes
From £350. Free and fixed, from your pictures
Phone
0345 017 0787
Last updated
23 October 2026
Surface Doctor technician refinishing the outside of a roll-top bath

How we price bath re-enamelling

Prices start from £350. We do not charge extra for travel to Llysdinam. The price depends on:

  • Whether we combine several jobs
  • Unusual colours or finishes
  • The type of damage
  • How easy the damage is to reach

Every job is a little different, so we price each one individually. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.

How to get a fixed price

You can usually get a fixed quote without us visiting. To make it quick:

  • Natural light rather than flash
  • The material, if you know it
  • Details of any past repairs
  • Where you are, by postcode

Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath, we can price the job without visiting.

Repair or replace in Llysdinam?

There are times replacing is better: a cracked-through bath, a change of size or shape, or a full refit. In most other cases, resurfacing is the better choice. Our bath re-enamelling starts from £350. The price depends on the type and amount of damage, the material and how many items we do on one visit. We give a fixed quote from your pictures, so you know the cost before you book.

Why us?

  • Everything repaired in place
  • Accredited with CHAS, Constructionline and SafeContractor
  • Most jobs done in one visit
  • Honest advice, even when it means no job

Read our prices page or guide to resurfacing and replacement costs.

What we can’t put right

Honesty matters more than a booking, so here’s what a repair won’t do:

  • Leaking taps or wastes (a plumber’s job)
  • A bath that’s rusted through
  • Problems we can’t see until an old finish comes off

Send us pictures and we’ll tell you honestly before you book.

Materials we work on in Llysdinam

  • Pressed steel baths
  • Basins & shower trays
  • Cast iron baths
  • Acrylic baths
  • Victorian roll-tops

Work for landlords and builders

We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.

We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.

Common questions in Llysdinam

Do you cover the whole of Powys?

We work UK-wide, so Llysdinam is covered. Our prices are the same everywhere.

Is it worth repairing rather than replacing?

In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it isn’t worth repairing, we’ll tell you.

Does re-enamelling smell?

Yes, while we’re applying the finish. We set up ventilation and the smell fades as it cures.

Can you redo someone else’s repair?

In most cases. We remove the old repair before doing a new one, so mention it when you send photos.

Will the new finish last?

A well-prepared finish lasts a long time if it’s looked after. Avoid abrasive cleaners and suction mats.

I rent my home. Can I book you?

Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged before the end of a tenancy.

Can you re-enamel a roll-top bath?

Yes, frequently. We resurface the inside, and the outside can be refinished too.

Does the bath have to be removed?

Not at all. Everything is done in your bathroom, with the room masked and ventilated.

How to care for the repair

Aftercare is simple, and it makes a real difference:

  • Fix dripping taps quickly
  • Rinse off hair dye, oils and bath bombs immediately
  • Clean with a soft cloth and mild detergent
  • Don’t leave bottles, razors or sponges standing on the surface

Use mild, non-abrasive cleaners, avoid suction bath mats, and don’t leave bottles or razors standing on the surface.

The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Resurfacing sooner means less repair work first.

Do you need bath re-enamelling in Llysdinam?

Sometimes it’s an earlier resurfacing that has failed, lifting by the plughole or blistering. We strip what’s failing and start again.

Send us a picture if you notice any of these:

  • A coloured bath you want in white
  • Several chips and rust patches
  • Wear marks under the taps
  • Enamel that is lost its shine and feels rough

Comparing quotes

  • The length of the guarantee and what it covers
  • What aftercare is recommended
  • Who turns up on the day
  • How changes to the job are handled

Choosing a repair company

Llysdinam and the surrounding area

Llysdinam is about 19 miles north of Brecon, in Powys. We agree a date that works for you, and we will give you an arrival time in advance, so you are not left waiting in all day. We work in 234 places across Powys, from the larger towns to small villages. Our nearest city page is Birmingham, about 68 miles away.

Our visits in LD1 and LD2 work the same way as everywhere else we cover. That includes homes on Cyffredin Lane and Cae Nant and the roads around them. If you are just outside Llysdinam, we cover Y Bontnewydd-ar-Wy (1 mile east), Crossway (2 miles east), Powys (2 miles south), Hawy (3 miles east) and Llanllyr (3 miles north-east). Within a short drive, we also cover Llanfair-ym-Muallt (5 miles south-east), Rhayader (7 miles north-west), Llanelwedd (5 miles south-east) and Llanwrtyd Wells (11 miles south-west).

Around Llysdinam

In Llysdinam, that means homes near The Golden Lion pub, Newbridge-On-Wye V.P. and Church of All Saints, among other places. For rail, the closest station is Builth Road station, roughly 3.3 miles south of the centre. A little further out are Llandrindod Wells Memorial Hospital (3.6 miles north-east) and Disserth and Trecoed (1.5 miles east). Open spaces near Llysdinam include Pentrosta Mire and Pen-llys.

Map of Llysdinam © OpenStreetMap contributors

Materials and what they mean for the repair

Acrylic

Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.

Cast iron

A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is what we repair.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.