Cumbria · England
Bath Re-enamelling in Lowca
Fixed-price bath re-enamelling in Lowca and the surrounding area, done in a single visit in most cases and guaranteed for a year.
- Resurfacing from £350
- Staining under the taps and around the waste
- An old resurfacing that’s failing
Bath re-enamelling in Lowca without replacing anything
If your bath is sound but looks tired, re-enamelling is generally the most cost-effective option. There is no removal, plumbing or tiling involved. Common call-outs are for stains that won’t shift and a bath that stays dull however much you clean it, in pressed steel baths, basins & shower trays and cast iron baths.
Whatever the size of the job, you get the same one-year guarantee.
- Where
- Lowca (CA28)
- Region
- Cumbria
- Guarantee
- One year on every repair
- Price
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
How the visit works
Arrival times are agreed in advance. On site, it takes the best part of a day in most cases. We leave the room clean and you’ll know when it can be used.
- We mask and protect the room and ventilate it.
- Next we degrease the bath and fix chips and rust spots.
- We prepare the surface and apply a bonding primer.
- Several coats of new finish are sprayed on.
- The bath is left to cure and can typically be used the next day.
Before we arrive
- Keep pets and children out of the room while we work
- Mention if the room is upstairs or in a flat
- Let us know if it has been repaired before
How to get a price
Getting a price is easy: take a close-up of the damage and a picture from further back, send them to us with your postcode, and you will get a fixed quote back. Quotes are free and no obligation.
Related advice
For landlords and businesses
If you manage property in Lowca, we can repair and quote for several addresses together. Just send photos for each address and we will come back with a combined price.
We’re used to working with agents and managing companies. Send the address, photos and access details.
Different materials, different repairs
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Steel often rusts by the plughole, so we check it carefully.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
Nearby places to Lowca
Also in Lowca
How we price bath re-enamelling
Prices start from £350. We do not charge extra for travel to Lowca. The price comes down to:
- Whether we combine several jobs
- The material
- Previous DIY repairs that have to come out
- How much damage there is
Our prices are the same across the UK, with no extra for Lowca. What changes the price is the job itself: the material, the amount of damage and how many items.
Quotes from your photos
Photographing the damage takes a minute, and it saves a visit. Try to send:
- What it’s made of, if you know
- Natural light rather than flash
- A picture taken from further back
- Something in shot to show the size
Email us a photo of the damage and one of the whole item, with your CA28 postcode, and we will come back with a fixed quote.
Why repair rather than replace?
Replacing a bath can take several days across several trades. Resurfacing takes one technician and generally a day, with the bath back in use the day after. Our bath re-enamelling starts from £350. No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all make a difference, and doing several things on one visit costs less than separate visits.
Why book with us
- Straight answers about what a repair can do
- One price list for the whole UK
- Rooms protected and left tidy
- Everything repaired in place
Take a look at our prices page and resurfacing vs replacement cost guide.
Signs you need bath re-enamelling in Lowca
Older baths often have several problems at once: worn patches, chips, rust spots and stains. Re-enamelling deals with all of them in one go.
You may need us if you’ve spotted:
- An outdated colour you’d like to change
- Chips and rust in more than one place
- A peeling or bubbling previous coating
- Staining under the taps and around the waste
Comparing quotes
- How changes to the job are handled
- If travel is included in the price
- What the guarantee covers, and for how long
- How the colour is matched
Lowca and the surrounding area
Lowca is about 3 miles north of Whitehaven, in Cumbria. Anywhere in CA28, a technician comes to you. Our repair technicians cover all 438 towns and villages in Cumbria, from the larger towns to small villages.
Here we cover the CA28 postcode area. You’ll find streets such as Ghyll Bank, Croft Head View and Solway Road, all of which we cover. We also cover the places around Lowca: Parton (1 mile south), Low Moresby (1 mile south-east), Common End (1 mile north-east), Quality Corner (1 mile south) and Moresby Parks (2 miles south-east). Within a short drive, we also cover Workington (4 miles north), Whitehaven (3 miles south), Maryport (10 miles north), Cockermouth (10 miles north-east), Moorclose (4 miles north) and Cleator Moor (5 miles south-east).
Landmarks near Lowca
Locally, our jobs take us to homes close to Church of St Bridget and Lowca Community School, among other places. Lowca’s nearest station is Parton station, about 0.8 miles south-west. Further afield, we also cover the area around The Rum Story (2.4 miles south) and Hayes Castle (1.1 miles north-east).
How to look after the repair
Looking after the surface is easy, and it makes a real difference:
- Store bottles off the bath
- Leave the bath for the full curing time before using it
- Stick to gentle, non-abrasive cleaners
- Fix dripping taps quickly
Rinse away dyes, oils and bath bombs straight after use, as they can stain. Fix dripping taps quickly.
Rust spots on a worn bath get worse with time and make the job bigger. Resurfacing before they spread keeps it simpler.
When we would advise against a repair
We would rather lose a job than do one that will not last, so here’s what a repair can’t put right:
- Leaks from fittings rather than the bath
- A bath split right through the body
- Holes rusted through the metal
If in doubt, send pictures and we will say what we think.
Materials we repair
- Basins & shower trays
- Pressed steel baths
- Acrylic baths
- Cast iron baths
- Victorian roll-tops
Common questions in Lowca
How do I get a price for bath re-enamelling in Lowca?
Resurfacing from £350. We give a fixed quote from your pictures. Send a close-up and a photo of the whole item and your postcode.
Is it OK to have pets in the house?
Please keep children and pets out of the room during the visit and until it has cured. The rest of the house is unaffected.
Someone resurfaced my bath and it’s peeling. Can you help?
Yes, we do this regularly. Removing the old finish takes extra time, which we include in the price.
Can you re-enamel a roll-top bath?
Yes, often. We resurface the inside, and the outside can be refinished too.
Does someone need to be in?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
Do you do work for letting agents?
We do, regularly. We can quote for several properties together and work between tenancies.
Is there a smell?
Yes, while we are applying the finish. We set up ventilation and the smell fades as it cures.
Can you price it without visiting?
Yes, almost always. A close-up and a wider photo are enough to give a fixed quote.
About our accreditations · Every repair comes with a one-year guarantee.
