Cumbria · England
Bath Re-enamelling for Parton homes
Problem with your bath in Parton? We put it right where it is, mix the colour on the day and guarantee the work for a year.
- Resurfacing from £350
- Wear marks under the taps
- A peeling or bubbling previous coating
How we handle bath re-enamelling in Parton
Re-enamelling gives a worn bath a new glossy surface without a refit. It’s the answer when the entire bath is tired rather than one spot. We regularly repair acrylic baths, Victorian roll-tops and basins & shower trays, and people most often call us about a roll-top that’s seen better days and a coating lifting around the plughole.
Your repair is guaranteed for a year, as with every job we do.
- Where
- Parton (CA28)
- Area hub
- Cumbria
- Cover
- A year, on every repair
- Price
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Questions from Parton
Can you resurface a pink bath in white?
Yes. We can resurface a coloured bath in white, and the basin and toilet can be done too.
How do I get a price for bath re-enamelling in Parton?
Prices start from £350. We give a fixed price based on pictures of the damage. Send a close-up and a photo of the whole item with your CA28 postcode.
Do you need to take the bath out?
Not at all. Everything is done in your bathroom, with the room protected and ventilated.
How long does re-enamelling take?
One day for most baths, ready the following day. We’ll confirm timings when we quote.
Can you price it without visiting?
Nearly always. If pictures don’t show enough, we will ask for another angle.
Does someone need to be in?
We need someone to let us in. After that, you can carry on with your day.
Can tenants book a repair?
We are happy to deal with the tenant, landlord or agent. Just ensure the landlord agrees.
Are you a vetted contractor?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Work for landlords and builders
We carry out planned and one-off repairs for housing associations and facilities teams in Cumbria and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.
Landlords, letting agents and housing providers in Parton use us as well as householders. Repairing between tenancies keeps void periods short, and it normally costs far less than a refit.
Towns and villages near Parton
More services for Parton
When to call us in Parton
Sometimes it’s an earlier resurfacing that has failed, peeling around the waste or bubbling. We strip what’s failing and start again.
Look out for any of the following:
- An original cast iron bath that needs restoring
- Several chips and rust patches
- Wear marks under the taps
- An outdated colour you’d like to change
Before booking anyone
- What happens if the damage is worse than the pictures show
- If travel is included in the price
- How long it needs to cure
- A fixed price, and whether VAT is included
Parton and nearby
Parton is about 2 miles north of Whitehaven, in Cumbria. Book a date that suits you, and you’ll know when to expect us, so there is no waiting around. We cover all 438 towns and villages across Cumbria.
Our visits in CA28 work the same way as everywhere else we cover. That includes homes on The Square, Main Street and Firth View. Close by, we cover Quality Corner (1 mile south-east), Lowca (1 mile north), Low Moresby (1 mile east), Moresby Parks (1 mile south-east) and Bransty (1 mile south). Further out, we also cover Workington (5 miles north), Maryport (10 miles north), Cockermouth (11 miles north-east), Moorclose (4 miles north), Cleator Moor (4 miles south-east) and Egremont (6 miles south).
Local landmarks in Parton
Around Parton, we work in homes near Church of St Bridget, Bransty Primary School and St Benedict's Catholic High School and the streets around them. There’s a railway station in Parton itself: Parton station. Other landmarks nearby include The Rum Story (1.5 miles south) and West Cumberland Hospital (2.8 miles south).
How we price bath re-enamelling
Resurfacing from £350. There’s no area surcharge for Parton. What changes the price is:
- Unusual colours or finishes
- Whether old repairs or coatings need taking off
- Where the damage is and how we get to it
- What kind of damage it is
Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Photos let us give you the exact figure.
Getting a price from photos
When you take your photos, a few simple things make all the difference:
- Where you are, by postcode
- Any details about the material
- A wider photo showing the entire bath
- Natural light rather than flash
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job the same day in most cases.
Keeping it looking good
Much of the damage we repair could have been avoided. A few tips:
- Store bottles off the bath
- Dry the bath after use to stop limescale
- Wash away dyes and oils after use
- Avoid suction-cup mats
Avoid hair dye, bath bombs and oils sitting on the surface, because they can mark the finish. Repair dripping taps promptly.
On a worn bath, rust spots keep spreading. It’s simpler to resurface before they spread.
DIY repairs versus a professional job
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and do not use it until it has fully cured. If it does not work out, we can still repair it properly.
How the visit works
Arrival times are agreed in advance, so you know when to expect us. Once we are there, the work takes the best part of a day for most jobs. We leave the room clean and ready to use once it has cured.
- First we protect the bathroom and set up ventilation.
- We clean and degrease the bath and repair any chips or rust.
- We prepare the surface and apply a bonding primer.
- We spray on the new enamel finish in several coats.
- Once cured, normally by the day after, the bath is ready.
How to prepare
- Point us to the nearest place to park
- Mention if the room is upstairs or in a flat
- Clear the area around the damage
Get a quote
Upload pictures of the damage and a wider shot of the entire item, with your CA28 postcode, and we will come back with a fixed quote.
Related advice
Honest limits
A few problems are outside what a surface repair can do:
- Plumbing leaks, which need a plumber
- Damage hidden under a previous coating, until it’s stripped back
- A metal bath with a through crack
Not sure? Send photos and we’ll give you a straight answer.
What we work on
- Acrylic baths
- Victorian roll-tops
- Cast iron baths
- Pressed steel baths
- Basins & shower trays
What your bath is made of matters
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is what we repair.
About our accreditations · Every repair comes with a one-year guarantee.
