Somerset · England
Bath Re-enamelling in Lower Aisholt
Bath re-enamelling for Lower Aisholt, without a refit. Get a fixed quote from your pictures, then we come to you.
- Resurfacing from £350
- A peeling or bubbling previous coating
- Several chips and rust patches
About our bath re-enamelling in Lower Aisholt
We re-enamel a lot of period and roll-top baths, which would be difficult and expensive to replace. Resurfacing them in place keeps the original bath. If you are dealing with a period or roll-top bath worth keeping and lots of chips and rust spots, we can normally put it right, whatever the material.
You’re covered for a year from the day of the repair. If anything is not right, ring us and we’ll come back.
- Location
- Lower Aisholt (TA5)
- County
- Somerset
- Warranty
- 12 months on all our work
- Price
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
What a repair cannot fix
Some jobs are not right for a repair, including:
- A poorly supported acrylic bath, until it’s firmed up
- Damage hidden under a previous coating, until it’s stripped back
- Leaking taps or wastes (a plumber’s job)
Send us pictures and we will tell you honestly before you book.
Surfaces we repair
- Pressed steel baths
- Cast iron baths
- Basins & shower trays
- Victorian roll-tops
- Acrylic baths
Covering Lower Aisholt
Lower Aisholt is about 6 miles west of Bridgwater, in Somerset. Whether you are in the middle of Lower Aisholt or on the outskirts, the service is the same: fixed prices, tidy work and a one-year guarantee. Lower Aisholt is one of 640 towns and villages in Somerset we cover.
We cover every part of the TA5 postcode area. We also cover the places around Lower Aisholt: Merridge (1 mile south-east), Aisholt (1 mile north-west), Pightley (2 miles east), Spaxton (2 miles north-east) and Adscombe (2 miles north-west). Larger places within reach include Taunton (7 miles south), Bridgwater (6 miles east), Burnham-on-Sea (11 miles north-east), Wellington (10 miles south-west), Sydenham (7 miles east) and Wilton (7 miles south).
What’s near Lower Aisholt
Typical jobs here are in homes near Church of All Saints, among other places. Well-known places in the area include Blazes (3.9 miles south-west) and Cannington Camp (4.4 miles north-east). Green spaces nearby include Cothelstone Hill.
What we do, step by step
A typical visit goes like this: we arrive at the agreed slot, protect everything around the work area, carry out the work and clear up. Plan for most of the day from start to finish. Before leaving, we tell you how long to leave it and what to avoid for the first few days.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
How to prepare
- Clear the area around the damage
- Mention any parking restrictions or tricky access
- Tell us if there are stairs or a lift
Ask for a price
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, include your postcode and send them over. What comes back is a fixed price, not a guess.
Related advice
Repairing versus replacing in Lower Aisholt
Replacing a bath normally involves a plumber, a fitter and a tiler. Re-enamelling takes one technician and usually one day, with the bath ready the following day. Resurfacing from £350, with every job priced individually. Every job is a little different, so we price each one individually. What’s damaged, how badly and how easy it is to reach all make a difference, and doing several things on one visit costs less than separate visits.
Why choose Surface Doctor in Lower Aisholt
- We leave the room as we found it
- Fixed prices from your photos
- We’ll tell you if it’s not worth repairing
- Everything repaired in place
Take a look at our pricing and resurfacing vs replacement cost guide.
What we are called out for in Lower Aisholt
Sometimes it’s an earlier resurfacing that has failed, lifting by the plughole or blistering. We strip what’s failing and start again.
Common reasons people in Lower Aisholt contact us include:
- Enamel that is lost its shine and feels rough
- An old resurfacing that’s failing
- Chips and rust in more than one place
- A roll-top that’s seen better days
Before you book anyone
- How long it needs to cure
- How changes to the job are handled
- What aftercare is recommended
- What preparation is included
What bath re-enamelling costs
Prices start from £350. We don’t charge extra for travel to Lower Aisholt. The price comes down to:
- How many items we do on one visit
- How much damage there is
- The type of damage
- Any earlier repairs that need removing first
Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it.
Send photos for a quote
You can usually get a fixed price without us visiting. To help us price it:
- What it’s made of, if you know
- Natural light rather than flash
- A close-up of the damage, in focus
- One picture of the whole bath
Send us pictures of the damage and a wider shot of the whole item, with your TA5 postcode, and we will come back with a fixed quote.
Also in Lower Aisholt
Lower Aisholt questions
Do you resurface freestanding baths?
Yes. We can do the inside and outside if you’d like.
Can tenants book a repair?
Yes, though it’s best to check with your landlord first. Landlords are frequently glad to have it sorted.
Is there a smell?
Some odour is normal while we spray, so we ventilate the room. It clears as the finish cures.
Do you work for landlords and businesses?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses.
Can you quote from photos?
Yes, almost always. Clear photos let us give you a fixed price without visiting.
Can you fix a peeling bath coating?
Normally, yes. The old coating comes off before we resurface it. Mention it when you send photos.
Can you repair several things at once?
Yes. Combining jobs on one visit brings the cost down. Send pictures of everything you’d like done.
Can you resurface a pink bath in white?
Yes. We can resurface a coloured bath in white, and we can do the rest of the suite as well.
Landlords, agents and businesses in Lower Aisholt
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.
Letting agents frequently send us pictures straight from the inventory. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
Keeping it looking good
Looking after the surface is easy, and it makes a real difference:
- Keep suction mats out of the bath
- Leave the bath for the full curing time before using it
- Don’t let dyes or oils sit on the finish
- Have chips seen to early
Rinse the bath and wipe it over after use, particularly where water is hard, so limescale can’t build up.
Worn enamel only gets rougher with time, and any rust spreads underneath. Acting earlier keeps the preparation simpler.
Different materials, different repairs
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that is the part we put right.
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Steel often rusts by the plughole, so we pay close attention there.
About our accreditations · Every repair comes with a one-year guarantee.
