Somerset · England
Bath re-enamelling & resurfacing in Wilton, Somerset
Bath re-enamelling in Wilton without the cost of replacing. Get a fixed price from your photos, then we come to you.
- Resurfacing from £350
- Wear marks under the taps
- Several chips and rust patches
How we handle bath re-enamelling in Wilton
Many of the baths we re-enamel are period roll-tops, which would be difficult and expensive to replace. Doing them in place keeps an original feature. We are frequently asked to fix worn patches where water runs and sits and a bath that stays dull however much you clean it, on acrylic baths, Victorian roll-tops and pressed steel baths.
We stand behind the work with a one-year guarantee, so you are covered after the visit.
- Location
- Wilton (TA1)
- Area hub
- Somerset
- Cover
- 12 months on all our work
- Quotes
- From £350. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Why repair rather than replace?
If the bath is sound, re-enamelling is usually much cheaper than replacing it, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s also far quicker. Resurfacing from £350, with every job priced individually. We do not add extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Why book with us
- Rooms protected and left tidy
- CHAS and Constructionline accredited
- Most jobs done in one visit
- Everything repaired in place
Take a look at our prices page or resurfacing vs replacement cost guide.
Repairs by material
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so a new finish makes them look new again.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Honest limits
Some problems need a builder, plumber or fitter rather than us:
- Problems we cannot see until an old finish comes off
- Acrylic that moves when you stand in it
- A metal bath with a through crack
Send us pictures and we’ll tell you honestly before you book.
What we work on
- Cast iron baths
- Acrylic baths
- Pressed steel baths
- Victorian roll-tops
- Basins & shower trays
Common problems we fix in Wilton
A dull surface stains and holds dirt, and cleaning harder only makes it worse. At that stage, resurfacing is the fix.
Send us a photo if you notice any of these:
- Stains that will not shift
- A coloured bath you want in white
- A roll-top that is seen better days
- Several chips and rust patches
Comparing quotes
- How long it needs to cure
- Who turns up on the day
- How the colour is matched
- What the guarantee covers, and for how long
Also near Wilton
More services for Wilton
Landlord and trade work in Wilton
We’re used to working with agents and managing companies. Send the address, pictures and access details and we’ll arrange it.
For anyone letting property in or around Wilton, we can repair and quote for several addresses together. Just send pictures for each address and we will price them together.
How it works
We work cleanly and quietly. We protect the area first, then the job itself takes a full day. Before we leave, we explain how soon it can be used and how to look after it.
- The room is masked, protected and ventilated.
- Next we degrease the bath and fix chips and rust spots.
- We key the surface and put on a bonding primer.
- We spray several coats of new enamel finish.
- The bath is left to cure and can typically be used the next day.
Before we arrive
- Let us know if it has been repaired before
- Tell us about parking, stairs or access
- Open a window if you can
Getting a price
The quickest way to a price is to send a couple of photos using our quote form or call us. We’ll say right away whether it can be repaired.
Related advice
Questions from Wilton
What information do you need?
Send pictures through the quote form or call 0345 017 0787, and we will take it from there.
Is it OK to have pets in the house?
Yes, as long as they stay out of the room we’re working in. We’ll tell you when the room can be used again.
How long is the bath unusable?
Most baths are done in a day and can be used the day after. We’ll confirm timings when we quote.
Is it messy?
We protect the room with dust sheets and masking first, and tidy up before we leave.
Can you fix a peeling bath coating?
Yes. Removing the old finish takes extra time, which we include in the price.
What happens if you find more damage?
We’ll show you and explain before doing anything extra. You won’t be charged for anything you haven’t agreed.
Does re-enamelling smell?
A little, during the work. Ventilation keeps it down, and it fades as the finish cures.
Can I add another job to the visit?
Yes, and it’s frequently cheaper. Just add the extra items to your photos and we’ll quote them together.
Keeping it looking good
Good habits make a big difference to how long a repair lasts:
- Repair dripping taps early
- Store bottles off the bath
- Leave the bath for the full curing time before using it
- Never use suction bath mats
Treat the new finish gently at first: let it cure fully, then use mild cleaners only. After that, no abrasives and no suction mats.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface and makes resurfacing more work.
Should I try a DIY kit first?
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is generally the cheaper route.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
Where we work around Wilton
Wilton is about 1 mile south-west of Taunton, in Somerset. We visit homes and businesses in Wilton and nearby villages, so there’s no workshop to go to. We cover 640 places in Somerset.
We cover every part of the TA1 postcode area and the streets around it. Whether you live on Mill Lane, Manor Road and Trull Road or anywhere nearby, we can come to you. With the A38 and A3807 close by, Wilton is easy for our repair technicians to reach. If you are just outside Wilton, we cover Taunton (1 mile north-east), Comeytrowe (1 mile west), Bishop's Hull (1 mile west), Upcott (2 miles west) and Staplegrove (2 miles north). Further out, we also cover Bridgwater (9 miles north-east), Chard (11 miles south-east), Wellington (6 miles west), Sydenham (10 miles north-east), Ilminster (10 miles south-east) and Watchet (15 miles north-west).
Near you in Wilton
We visit homes around Parkfield Primary School, Vivary Park and The Vivary Arms, among other places. Also close by are St George's Church (less than half a mile east), The Castle School (0.7 miles north-west) and The Castle School (0.7 miles north-west). Wilton’s nearest station is Taunton station, about 1 mile north of the centre. Nearby you’ll also find Musgrove Park Hospital (0.6 miles west) and Post Office Telecommunications Museum (less than half a mile north-east). For a walk, there’s Knowle Hill.
About our accreditations · Every repair comes with a one-year guarantee.
