Hampshire · England
Bath Re-enamelling in Lower Farringdon
Damaged bath in Lower Farringdon? We put it right where it is, mix the colour on the day and guarantee the work for a year.
- Resurfacing from £350
- Chips and rust in more than one place
- Worn patches where water runs and sits
What bath re-enamelling costs
Resurfacing from £350. Prices are worked out job by job, from your photos. The main factors are:
- The size and number of damaged areas
- Any earlier repairs that need removing first
- The colour and finish to match
- Doing more than one item at once
Set against the cost of replacement, repairing generally costs far less, because there is no removal, plumbing or making good. The quote lists exactly what you are paying for.
Quotes from your pictures
Before you send pictures, these tips help us give you a firm price:
- Your postcode, so we can check dates
- A clear, close picture of the problem area
- A coin or ruler next to the damage for scale
- A photo taken from further back
Pricing is simple: take a close-up of the damage and a picture from further back, send them over with your postcode, and we’ll reply with a fixed quote. Quotes are free and you are under no obligation.
About our bath re-enamelling in Lower Farringdon
Re-enamelling is a one-day job for most baths, with the bath ready to use the following day. Taps, tiles, panels and plumbing all stay in place. Whether it’s staining under the taps and around the waste and an old resurfacing that’s failing, we can help, on acrylic baths, cast iron baths and basins & shower trays alike.
Peace of mind is built in: our one-year guarantee applies to every job, and we explain what it covers before you book.
- Where
- Lower Farringdon (GU34)
- Region
- Hampshire
- Guarantee
- One year on every repair
- Price
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Work for landlords and builders
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We’re CHAS, Constructionline and SafeContractor accredited.
Landlords, letting agents and housing providers in Lower Farringdon use us as well as householders. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
Where we work around Lower Farringdon
Lower Farringdon is about 3 miles south of Alton, in Hampshire. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. We cover 683 places across Hampshire, from the larger towns to small villages. Our nearest city page is London, about 47 miles away.
Our visits in GU34 work the same way as everywhere else we cover. Streets in the area include Gosport Road, Brightstone Lane and Shirnall Meadow. Other places close to Lower Farringdon include Farringdon (1 mile east), Upper Farringdon (1 mile east), Chawton (2 miles north), Hartley Mauditt (2 miles east) and Alton (3 miles north). Further out, we also cover Basingstoke (12 miles north-west), Winchester (14 miles west), Fleet (13 miles north-east), Horndean (14 miles south), Aldershot (14 miles north-east) and Petersfield (8 miles south).
Around Lower Farringdon
Typical jobs here are in homes near Church of All Saints and Royal Oak pub, among other places. Lower Farringdon’s nearest station is Alton station, roughly 3 miles north of the centre. A little further out are Alton Community Hospital (2 miles north) and The Romany Museum (2.6 miles south-east). Not far away are Red Hill.
Different materials, different repairs
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Acrylic
Acrylic baths can be resurfaced too, using a system that bonds to acrylic. The bath needs to be firm and well supported for the finish to last.
What happens on the day
The work is clean and fairly quiet, so you can carry on at home. We protect the area first, then the job itself takes a full day. At the end we talk you through how soon it can be used and how to look after it.
- The room is masked, protected and ventilated.
- Next we degrease the bath and fix chips and rust spots.
- The surface is prepared and a bonding primer applied.
- We spray on the new enamel finish in several coats.
- We leave it to cure, and it’s typically ready the following day.
Getting ready for the visit
- Let the surface dry out before the visit
- Keep a parking space free if you can
- Let us know if it has been repaired before
Getting a price
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job without visiting.
Advice
Lower Farringdon: your questions answered
Is my repair covered?
All our work carries our one-year guarantee. We’ll explain what it covers when we quote.
Can you do the outside of a roll-top?
Yes. Inside and out.
Is it messy?
No. The work area is masked and covered, and we take our waste away with us.
Will there be a smell?
There can be some smell while we work. It fades as everything cures.
Can you quote from photos?
Usually, yes. A close-up and a wider photo are enough to give a fixed price.
Does the bath have to be removed?
No. We resurface it in place, so nothing else is disturbed.
What happens if you find more damage?
Your quote covers the damage in the photos. If there’s more, we’ll tell you before starting.
Someone resurfaced my bath and it’s peeling. Can you help?
Yes. Stripping the old coating adds time, so it’s reflected in the quote.
Why repair rather than replace?
Replacing a bath generally involves a plumber, a fitter and a tiler. Re-enamelling takes one technician and usually one day, and the bath can be used the day after. Prices start from £350. We do not add extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.
What you get with us
- Colours mixed by hand to suit your surface
- We leave the room as we found it
- We come to you, anywhere in the UK
- Accredited with CHAS, Constructionline and SafeContractor
Take a look at our pricing or bath cost comparison.
DIY repairs versus a professional job
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it will not stop us repairing it. Just mention it when you send pictures, as it can add time.
If you’re set on a kit, follow its instructions closely, make sure the area is clean and completely dry, and don’t use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
How to care for the repair
Aftercare is simple:
- Do not let dyes or oils sit on the finish
- Store bottles off the bath
- Keep suction mats out of the bath
- Leave the bath for the full curing time before using it
Wait for the curing time we give you before the first bath. After that, a soft cloth and washing-up liquid is all it needs.
On a worn bath, rust spots keep spreading, and each one adds to the preparation. Resurfacing before they spread keeps it simpler.
When a repair isn’t the answer
Honesty matters more than a booking, so here’s what a repair can’t fix:
- Acrylic that moves when you stand in it
- A metal bath with a through crack
- Damage hidden under a previous coating, until it’s stripped back
Not sure? Send photos and we’ll give you a straight answer before booking.
Surfaces we repair
- Acrylic baths
- Basins & shower trays
- Pressed steel baths
- Cast iron baths
- Victorian roll-tops
Nearby places to Lower Farringdon
More services for Lower Farringdon
About our accreditations · Every repair comes with a one-year guarantee.
