Hampshire · England
Bath re-enamelling & resurfacing in Farringdon, Hampshire
Local bath re-enamelling for Farringdon: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- Brown or grey marks that don’t clean off
- A peeling or bubbling previous coating
Bath re-enamelling at your home in Farringdon
After re-enamelling, the bath has a smooth, glossy, new-looking surface, without any of the disruption of replacing it. It’s ideal if you like your bathroom but not the state of the bath. Our repair technicians work on acrylic baths, cast iron baths and Victorian roll-tops, and the jobs we see most are thin, worn enamel in places and a bath that stays dull however much you clean it.
Peace of mind is built in: our one-year guarantee applies to every job, and we explain what it covers before booking.
- Area
- Farringdon (GU34)
- County
- Hampshire
- Cover
- A year, on every repair
- Quote
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Looking after it afterwards
Simple care helps the repair last. Our advice:
- Leave the bath for the full curing time before using it
- A quick wipe after use keeps limescale away
- Don’t leave a chip unrepaired
- Use washing-up liquid and a soft cloth
Avoid hair dye, bath bombs and oils sitting on the surface, because they can mark the finish. Fix dripping taps quickly.
Leave a peeling coating alone. Moisture gets underneath and makes it worse, so it’s better to have it stripped and redone.
Covering Farringdon
Farringdon is about 3 miles south of Alton, in Hampshire. Whether you are in the middle of Farringdon or on the outskirts, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Farringdon is one of 683 places in Hampshire we cover. We work right across the region, from Farringdon to London (about 47 miles away).
Postcode districts we cover here: GU34. Local streets include Hall Lane, Crows Lane and Gaston Lane, all of which we cover. We also cover the places around Farringdon: Upper Farringdon (1 mile north-east), Lower Farringdon (1 mile west), Chawton (2 miles north), Hartley Mauditt (2 miles east) and Alton (3 miles north). Within a short drive, we also cover Basingstoke (12 miles north-west), Winchester (15 miles west), Fleet (13 miles north-east), Horndean (14 miles south), Aldershot (14 miles north-east) and Petersfield (8 miles south).
Landmarks near Farringdon
Locally, our jobs take us to homes close to Church of All Saints and Rose and Crown Inn and the streets around them. The closest station to Farringdon is Alton station, about 3 miles north of the centre. Nearby you will also find The Romany Museum (2.3 miles south-east) and Alton Community Hospital (2 miles north). For a walk, there is Selborne Hill.
What your bath is made of matters
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. It must be solid and not flex underfoot for the finish to last.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Nearby places to Farringdon
What else we do in Farringdon
Repairing versus replacing in Farringdon
If you like your bathroom but not your bath’s surface, re-enamelling is the least disruptive fix. Nothing else is disturbed. Our bath re-enamelling starts from £350. Set against the cost of replacement, a repair is usually a fraction of the price, because there’s no removal, plumbing or making good. The quote lists exactly what you are paying for.
Why us?
- Free fixed quotes from pictures
- No extra charge for your area
- One-year guarantee on every repair
- Normally one visit, start to finish
Take a look at our prices page and resurfacing vs replacement cost guide.
Work for landlords and builders
We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We’re CHAS, Constructionline and SafeContractor accredited.
Farringdon questions
It’s been repaired before. Can you still fix it?
Yes, we frequently do. It can add a little time, which we include in the quote.
How long does re-enamelling take?
Normally one day, with the bath ready the day after. Deeply pitted baths may need a second day.
Will there be fumes?
Yes, while we’re applying the finish. We set up ventilation and the smell fades as it cures.
Can a failed resurfacing be redone?
Normally, yes. The old coating comes off before we resurface it. Tell us about it when you ask for a quote.
How durable is a resurfaced bath?
Look after it and it lasts. Gentle cleaning, no suction mats.
Does someone need to be in?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
When can you do it?
Your quote comes with available dates. If it’s urgent, say so and we’ll do what we can.
Is my repair covered?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
When to call us in Farringdon
Previous coatings can fail too, peeling around the waste or bubbling. We strip what’s failing and start again.
The most common problems we are called about are:
- An old resurfacing that is failing
- A dull, rough surface that will not come clean
- Thin, worn enamel in places
- A roll-top that’s seen better days
Comparing quotes
- Aftercare advice
- What preparation is included
- What happens if the damage is worse than the pictures show
- The length of the guarantee and what it covers
What a repair cannot fix
It helps to know what we cannot do too:
- A cast iron or steel bath that is cracked right through
- Steel that has corroded right through
- Acrylic that moves when you stand in it
Not sure? Send pictures and we will give you a straight answer.
Materials we repair
- Victorian roll-tops
- Pressed steel baths
- Acrylic baths
- Basins & shower trays
- Cast iron baths
How the visit works
Arrival times are agreed in advance, so you’re not left guessing. On site, it takes most of the day. The room is left tidy and ready to use once it has cured.
- We mask and protect the room and ventilate it.
- We clean and degrease the bath and repair any chips or rust.
- We prepare the surface and apply a bonding primer.
- We spray several coats of new enamel finish.
- Once cured, normally by the day after, the bath is ready.
Before we arrive
- Make sure the room can be ventilated
- Keep a parking space free if you can
- Let us know which floor the room is on
How to get a price
No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we’ll come back with a fixed figure.
Read more
DIY kit or professional repair?
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send photos.
About our accreditations · Every repair comes with a one-year guarantee.
