Wiltshire · England
Bath re-enamelling & resurfacing in Lower Moor, Wiltshire
Bath re-enamelling in and around Lower Moor: a fixed quote from photos, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- Enamel that’s lost its shine and feels rough
- A peeling or bubbling previous coating
Bath re-enamelling in Lower Moor, done in place
We do not move the bath, so your taps, tiles and plumbing are left alone. Most baths are done in one visit, with the bath ready to use the following day. Our repair technicians work on pressed steel baths, cast iron baths and Victorian roll-tops, and the jobs we see most are a coating lifting around the plughole and lots of chips and rust spots.
You’re covered after we leave: our one-year guarantee applies to every job, and we will explain exactly what it covers when we quote.
- Location
- Lower Moor (SN16)
- Area hub
- Wiltshire
- Guarantee
- 12 months on all our work
- Price
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Should you replace it?
If the bath is sound, re-enamelling is generally much cheaper than replacing it, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s also far quicker. Our bath re-enamelling starts from £350. A few things move the price: access, material, the extent of the damage and whether we can do several items together. Send photos and you will get a fixed figure.
Why Lower Moor clients choose us
- Colours mixed by hand to suit your surface
- Accredited with CHAS, Constructionline and SafeContractor
- We will tell you if it’s not worth repairing
- We leave the room as we found it
See our pricing or bath cost comparison.
How to care for the repair
A little care keeps the finish looking good. We recommend:
- Avoid suction-cup mats
- Clean with a soft cloth and mild detergent
- Dry the bath after use to stop limescale
- Wash away dyes and oils after use
Treat the new finish gently at first: let it cure fully, then use mild cleaners only. From then on, avoid abrasives and suction mats.
Rust spots on a worn bath get worse with time, and each one adds to the preparation. Resurfacing before they spread keeps it simpler.
When we would advise against a repair
Some problems need a builder, plumber or fitter rather than us:
- Damage hidden under a previous coating, until it’s stripped back
- A poorly supported acrylic bath, until it’s firmed up
- Leaks from fittings rather than the bath
If in doubt, send pictures and we’ll say what we think.
Surfaces we repair
- Acrylic baths
- Pressed steel baths
- Cast iron baths
- Basins & shower trays
- Victorian roll-tops
Common problems we fix in Lower Moor
Enamel does not fail overnight. Abrasive cleaners, limescale and years of use dull the surface, typically first under the taps and around the waste.
The most common problems we are called about are:
- An old resurfacing that is failing
- A coloured bath you want in white
- Wear marks under the taps
- Staining under the taps and around the waste
Questions to ask before you book
- How the room is protected while they work
- Who will actually do the work
- How long it needs to cure
- Whether there are any call-out or travel charges
About Lower Moor
Lower Moor is about 6 miles south of Cirencester, in Wiltshire. Book a date that suits you, and we’ll give you an arrival time in advance, so there is no waiting around. Lower Moor is one of 425 places in Wiltshire where we work. We work right across the region, from Lower Moor to Birmingham (59 miles away).
Our visits in SN16 work the same way as everywhere else we cover. Other places close to Lower Moor include Brandier (1 mile north-west), Minety (1 mile south-east), Upper Minety (1 mile west), Minety Common (2 miles south-east) and Somerford Keynes (2 miles north). We also work in nearby towns such as Chippenham (13 miles south-west), Calne (13 miles south), Malmesbury (6 miles south-west), Hardenhuish (13 miles south-west), Lyneham (8 miles south) and Pewsham (13 miles south-west).
Local landmarks in Lower Moor
Typical jobs here are in homes near Minety Church of England Primary School and Church of St Leonard. For rail, the closest station is Kemble station, about 4.4 miles north-west of the centre. Nearby you’ll also find Ashton Keynes Castle (2.6 miles north-east). For a walk, there’s Clattinger Farm.
How we price bath re-enamelling
Prices start from £350. We do not charge extra for travel to Lower Moor. The price depends on:
- Access to the area
- The type of damage
- Whether we combine several jobs
- Any earlier repairs that need removing first
Every job is a little different, so we price each one individually. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.
Quotes from your pictures
Photographing the damage takes a minute. Please include:
- Natural light rather than flash
- Details of any past repairs
- One picture of the whole bath
- A clear, close picture of the problem area
Most customers in Lower Moor get their price from pictures. Tell us what happened and where you are, and we will send back a fixed quote and some dates.
Lower Moor questions
Can pets and children be at home?
Just keep them out of the work area. We will tell you when the room can be used again.
Are there extra charges for Lower Moor?
We do not add a call-out fee. Your fixed price includes everything.
Can you price it without visiting?
Normally, yes. Clear photos let us give you a fixed price without visiting.
What happens next?
We check the damage, the material and your postcode, then reply with a quote and the next dates we have.
Is it messy?
Dust sheets and masking go down before we start, and tidy up before we leave.
Is the work guaranteed?
Yes, for a year. If there is a problem with the work in that time, we come back and put it right.
What happens if you find more damage?
We’ll show you and explain before doing anything extra. Nothing extra is done without your say-so.
How long will the bath be out of use?
Most baths are done in a day and can be used the day after. We give you timings with the quote.
Landlords, agents and businesses in Lower Moor
Builders use us to fix snagging damage before handover, saving last-minute replacements. Several plots can be done in one visit to keep costs down.
Rented homes see more wear and tear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
Also near Lower Moor
More services for Lower Moor
What happens on the day
When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take most of the day. We tidy up before we leave and let you know when you can use it again.
- First we protect the bathroom and set up ventilation.
- We clean and degrease the bath and repair any chips or rust.
- We key the surface and put on a bonding primer.
- We spray on the new enamel finish in several coats.
- We leave it to cure, and it’s normally ready the next day.
Before we arrive
- Open a window if you can
- Tell us if there are stairs or a lift
- Point us to the nearest place to park
Ask for a price
Getting a price is easy: snap the damage close up and then the whole item, send them over with your postcode, and you’ll get a fixed quote back. Quotes are free and you are under no obligation.
Advice
Repairs by material
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. It must be solid and not flex underfoot for the finish to last.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
About our accreditations · Every repair comes with a one-year guarantee.
