Gloucestershire · England
Bath Re-enamelling in Somerford Keynes
Fixed-price bath re-enamelling in Somerford Keynes and the surrounding area, done in a single visit in most cases.
- Resurfacing from £350
- Worn patches where water runs and sits
- Chips and rust in more than one place
Bath re-enamelling at your home in Somerford Keynes
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. The finish is sprayed on in several coats over a bonding primer, after the bath has been cleaned, repaired and keyed. If you are dealing with a dull, rough surface that won’t come clean and several chips and rust patches, we can usually put it right, whatever the material.
Peace of mind is built in: our one-year guarantee applies to every job, and we will explain exactly what it covers when we quote.
- Area
- Somerford Keynes (GL7)
- Area hub
- Gloucestershire
- Cover
- A year, on every repair
- Quotes
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Work for landlords and builders
For developers and builders, we fix damage before handover, saving last-minute replacements. Several plots can be done in one visit.
Landlords, letting agents and housing providers in Somerford Keynes use us as well as householders. Repairing between tenancies keeps void periods short, and it typically costs far less than a refit.
Aftercare tips
Much of the damage we repair could have been avoided. A few tips:
- Don’t use the bath until it has fully cured
- Have chips seen to early
- A dripping tap should be fixed promptly
- Wipe the bath dry after use in hard water areas
Dry the bath after use if possible, and rinse away any product left on the surface.
Don’t try to scrub a worn bath back to shine. It removes more of the surface and makes resurfacing more work.
Common problems we fix in Somerford Keynes
Older baths often have several problems at once: worn patches, chips, rust spots and stains. Re-enamelling deals with all of them in one go.
If you can see any of these, send us a picture:
- Thin, worn enamel in places
- Stains that won’t shift
- Several chips and rust patches
- An outdated colour you’d like to change
Before you book anyone
- How the colour is matched
- How long the guarantee is and what it covers
- Whether there are any call-out or travel charges
- What happens if the damage is worse than the pictures show
Your questions about bath re-enamelling in Somerford Keynes
What happens after I send photos?
We check the damage, the material and your postcode, then reply with a quote.
Will you leave a mess?
No. The work area is masked and covered, and we take our waste away with us.
Can you change the colour of my bath?
Yes. Coloured baths can be resurfaced in white, and we can do the rest of the suite as well.
Do you need to take the bath out?
No. It’s re-enamelled where it stands, so the tiles and taps stay put.
Do I need to be at home?
Someone needs to let us in and show us the job. You don’t need to watch us work.
Can I add another job to the visit?
Yes. Combining jobs on one visit brings the cost down. Include photos of each item.
Can a failed resurfacing be redone?
Yes, we do this regularly. Stripping the old coating adds time, so it’s reflected in the quote.
What does bath re-enamelling cost?
Resurfacing from £350. Because every job differs, we price from pictures. You will get a fixed figure before you book.
DIY repairs versus a professional job
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and don’t use it until it has fully cured. If it fails, we can still put it right.
Why repair rather than replace?
If you like your bathroom but not your bath’s surface, resurfacing is the simplest answer. Tiles, panels and taps stay put. Resurfacing from £350, with every job priced individually. Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.
What you get with us
- A year’s guarantee on all work
- A fixed quote before you book
- No extra charge for your area
- Rooms protected and left tidy
Read our pricing or resurfacing vs replacement cost guide.
The process
Nothing needs to be moved out of the room. We bring everything we need with us, put protection down and get going once we have agreed what we’re doing. It typically takes most of the day, and you can get on with other things while we are there.
- We mask and protect the room and ventilate it.
- Next we degrease the bath and fix chips and rust spots.
- We key the surface and put on a bonding primer.
- We spray on the new enamel finish in several coats.
- We leave it to cure, and it’s normally ready the following day.
Preparing for the visit
- Have a window or extractor fan available
- Tell us about parking, stairs or access
- Tell us about any previous repairs or coatings
Ask for a price
You don’t need a survey visit. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.
Read more
When we would advise against a repair
Some problems need a builder, plumber or fitter rather than us:
- Anything hidden under an old coating, until we remove it
- Steel that has corroded right through
- An acrylic bath that flexes badly underfoot
Send us pictures and we will tell you honestly.
Materials we repair
- Basins & shower trays
- Pressed steel baths
- Victorian roll-tops
- Acrylic baths
- Cast iron baths
Somerford Keynes and nearby
Somerford Keynes is about 4 miles south of Cirencester, in Gloucestershire. We work in every kind of home, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. We cover 470 places across Gloucestershire, from the larger towns to small villages. We work right across the region, from Somerford Keynes to Birmingham (57 miles away).
All of GL7 is within our area. Jobs here include addresses on Water Lane, Spine Road West and Mill Lane and the roads around them. We also cover the places around Somerford Keynes: Ashton Keynes (2 miles east), Brandier (2 miles south), South Cerney (2 miles north-east), Lower Moor (2 miles south) and Upper Minety (2 miles south-west). Further out, we also cover Stroud (13 miles north-west), Cirencester (4 miles north), Stonehouse (15 miles north-west), Tetbury (8 miles west), Nailsworth (11 miles west) and Uplands (12 miles north-west).
Landmarks near Somerford Keynes
Locally, our jobs take us to homes close to The Bakers Arms and Church of All Saints, among other places. For rail, the closest station is Kemble station, about 2.9 miles north-west. Further afield, we also cover the area around Cirencester Hospital (4.1 miles north) and Smerrill Farm Museum (3 miles north-west). The countryside around Somerford Keynes includes Clattinger Farm.
Prices and what affects them
Resurfacing from £350. We price every job individually. What matters most is:
- The material
- Unusual colours or finishes
- How many items we do on one visit
- The size and number of damaged areas
We do not add extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.
How to get a fixed price
You can usually get a fixed quote without us visiting. To help us price it:
- A coin or ruler next to the damage for scale
- Where you are, by postcode
- What it’s made of, if you know
- A close-up of the damage, in focus
For a price in Somerford Keynes, photos are the quickest way: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.
Also near Somerford Keynes
Other services in Somerford Keynes
About our accreditations · Every repair comes with a one-year guarantee.
