Worcestershire · England

Bath re-enamelling & resurfacing in Lower Moor, Worcestershire

Full bath re-enamelling and resurfacing at your home in Lower Moor, with a one-year guarantee on every repair.

  • Resurfacing from £350
  • Wear marks under the taps
  • An old resurfacing that is failing
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath re-enamelling in Lower Moor

How we handle bath re-enamelling in Lower Moor

Re-enamelling is a one-day job for most baths, with the bath ready to use the following day. Taps, tiles, panels and plumbing all stay in place. We are often asked to fix a dull, rough surface that won’t come clean and worn patches where water runs and sits, in acrylic baths, cast iron baths and Victorian roll-tops.

The work is covered for a year after we finish. If anything isn’t right, ring us and we’ll sort it.

Location
Lower Moor (WR10)
Area hub
Worcestershire
Warranty
A year, on every repair
Quotes
From £350. Free and fixed, from your pictures
Phone
0345 017 0787
Updated
23 October 2026
Surface Doctor technician refinishing the outside of a roll-top bath

Do you need bath re-enamelling in Lower Moor?

In hard water areas, limescale and the cleaning it needs wear enamel faster, and abrasive cleaners do the most damage.

People generally call us after spotting something like this:

  • Brown or grey marks that do not clean off
  • A coloured bath you want in white
  • Enamel that is lost its shine and feels rough
  • Thin, worn enamel in places

Comparing quotes

  • Whether they match the colour on site
  • How to care for the finish
  • A fixed quote, and whether VAT is included
  • What preparation is included

Our hiring checklist

Where we work around Lower Moor

Lower Moor is about 4 miles north-west of Evesham, in Worcestershire. Book a date that suits you, and we’ll give you an arrival time in advance, so you’re not left waiting in all day. Lower Moor is one of 376 places in Worcestershire where we work. You can also see our page for Birmingham, about 25 miles away.

All of WR10 is within our area. That includes homes on Manor Road, Back Way and Gibbs Close. Other places close to Lower Moor include Hill (1 mile north-east), Wyre Piddle (1 mile west), Fladbury (1 mile south-east), Throckmorton (2 miles north) and Wick (2 miles south-west). Within a short drive, we also cover Worcester (9 miles north-west), Redditch (13 miles north), Bromsgrove (15 miles north), Great Malvern (12 miles west), Droitwich Spa (11 miles north-west) and Evesham (4 miles south-east).

Around Lower Moor

Typical jobs here are in homes near Pershore High School, Saint Thomas and Fladbury CofE First School and the streets around them. For rail, the closest station is Pershore station, roughly 1.9 miles west. Nearby you will also find Elmley Castle (4.3 miles south). The countryside around Lower Moor includes Greenhill and Tiddesley Wood.

Map of Lower Moor © OpenStreetMap contributors

DIY repairs versus a professional job

For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.

You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.

Honest limits

Some problems need a builder, plumber or fitter rather than us:

  • Leaking taps or wastes (a plumber’s job)
  • Damage hidden under a previous coating, until it’s stripped back
  • Steel that has corroded right through

Not sure? Send photos and we will give you a straight answer before booking.

What we work on

  • Cast iron baths
  • Basins & shower trays
  • Acrylic baths
  • Victorian roll-tops
  • Pressed steel baths

Work for landlords and builders

Landlords, letting agents and housing providers in Lower Moor use us as well as homeowners. A repair between tenants keeps the property empty for less time, and it usually costs far less than a refit.

We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.

What happens on the day

Here’s how a visit generally runs: we arrive on time, protect everything around the work area, carry out the work and clear up. Allow a full day from start to finish. Before we go, we’ll explain how long to leave it and what to avoid for the first few days.

  1. We check the bath and agree the finish with you.
  2. Taps, tiles and the floor are masked off.
  3. We degrease the bath, fix any damage and key the surface.
  4. Primer and finish coats are applied.
  5. We remove the masking, tidy up and give you the curing time.

How to prepare

  • Mention if the room is upstairs or in a flat
  • Mention any earlier repairs or resurfacing
  • Plan for the room to be out of bounds to pets and children

Get a quote

No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through, and you’ll get a fixed figure back.

Get a free quote

Advice

Should you replace it?

When the bathroom is fine apart from the bath’s finish, re-enamelling is the least disruptive fix. Tiles, panels and taps stay put. Resurfacing from £350, with every job priced individually. Our prices are the same across the UK, so there’s no premium for Lower Moor. The job itself decides the price: how much damage, what it’s made of and how many items.

Why choose Surface Doctor in Lower Moor

  • Typically one visit, start to finish
  • Honest advice, even when it means no job
  • Colour mixed on the day to match
  • A year’s guarantee on all work

Take a look at our pricing or guide to resurfacing and replacement costs.

Your questions about bath re-enamelling in Lower Moor

Do you work in Lower Moor?

Yes. We cover the whole UK and come to Lower Moor. Send us pictures for a fixed quote, or call 0345 017 0787.

What do you need from me?

Some pictures, your postcode and how to reach you. On the day, access to the room.

Are you accredited?

Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.

Can you resurface a pink bath in white?

Yes, white is the usual choice. Mention the colour you want when you send pictures.

Can I add another job to the visit?

Yes. Doing several items on one visit usually costs less than separate visits. Send photos of everything you’d like done.

Does re-enamelling smell?

A little, during the work. Ventilation keeps it down, and it fades as the finish cures.

Is it OK to have pets in the house?

We ask you to keep children and pets out of the room while we work and until it has cured. Everywhere else in the home is fine.

How quickly can you book me in?

It depends on the time of year and where you are. Send photos with your postcode and we’ll reply with the earliest dates.

Repairs by material

Pressed steel

Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.

Cast iron

A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is the part we put right.

Prices and what affects them

Resurfacing from £350. There is no charge for travel to Lower Moor. The price depends on:

  • How hard the colour is to match
  • The material and finish
  • The type of damage
  • How many areas need work

Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access, and doing several items at once reduces it.

How to get a fixed quote

When you take your pictures, a few simple things make all the difference:

  • A picture taken from further back
  • A coin beside the damage so we can judge size
  • Any earlier repairs or coatings
  • A clear, close picture of the problem area

Send us a photo of the damage and one of the whole item, with your WR10 postcode, and we’ll come back with a fixed quote.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.