Worcestershire · England
Bath re-enamelling & resurfacing in Hill, Worcestershire
Bath re-enamelling in and around Hill: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- An old resurfacing that is failing
What your bath is made of matters
Acrylic
Acrylic baths can be resurfaced too, using a system that bonds to acrylic. The bath needs to be firm and well supported for the finish to last.
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
Bath re-enamelling at your home in Hill
Re-enamelling is a one-day job for most baths, and you can use the bath the following day. Nothing is disconnected or removed. We regularly repair basins & shower trays, cast iron baths and acrylic baths, and common reasons people contact us are a period or roll-top bath worth keeping and a bath that stays dull however much you clean it.
You’re covered after we leave: our one-year guarantee applies to every job, and we’ll explain exactly what it covers when we quote.
- Area
- Hill (WR10)
- Area hub
- Worcestershire
- Cover
- 12 months on all our work
- Quote
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Repairing versus replacing in Hill
Replacing a bath typically involves a plumber, a fitter and a tiler. Resurfacing is one technician, normally in a day, with the bath ready the following day. Resurfacing from £350, with every job priced individually. Set against the cost of replacement, a repair is typically a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
What you get with us
- CHAS, Constructionline and SafeContractor accredited
- No need to remove anything
- Same prices wherever you are
- One visit for most repairs
Take a look at our full price list or guide to resurfacing and replacement costs.
Nearby places to Hill
Also in Hill
Prices and what affects them
Prices start from £350. We price every job individually, from your pictures. What matters most is:
- The material
- Any earlier repairs that need removing first
- How hard the colour is to match
- The size and number of damaged areas
Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it, and combining items on one visit brings it down.
How to get a fixed quote
Most quotes are done from pictures alone. To help us price it:
- One sharp close-up of the damage
- The postcode, so we can plan the visit
- Something in shot to show the size
- Natural light rather than flash
To get a price, send a couple of photos using our quote form or ring us. We will say straight away if a repair is the right fix.
Where we work around Hill
Hill is about 3 miles north-east of Pershore, in Worcestershire. We work in every kind of home, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Hill is one of 376 towns and villages in Worcestershire we cover. You can also see our page for Birmingham, about 24 miles away.
Every address in WR10 is covered, from the main roads to the quietest streets. We also cover the places around Hill: Lower Moor (1 mile south-west), Throckmorton (1 mile north), Fladbury (1 mile south-east), Wyre Piddle (1 mile west) and Pinvin (2 miles west). We also work in nearby towns such as Worcester (9 miles north-west), Redditch (12 miles north), Bromsgrove (14 miles north), Great Malvern (13 miles west), Droitwich Spa (10 miles north-west) and Evesham (5 miles south-east).
What’s near Hill
Typical jobs here are in homes near Saint Thomas and Pershore High School and the streets around them. The nearest railway station is Pershore station, roughly 2.1 miles west. A little further out are Elmley Castle (4.9 miles south). The countryside around Hill includes Greenhill and Tiddesley Wood.
What we can’t put right
A repair isn’t always the answer, and we will tell you before we start. Repairs will not solve:
- Anything hidden under an old coating, until we remove it
- An acrylic bath that flexes badly underfoot
- A bath split right through the body
Not sure? Send pictures and we will give you a straight answer before you book.
What we work on
- Cast iron baths
- Acrylic baths
- Pressed steel baths
- Basins & shower trays
- Victorian roll-tops
What we are called out for in Hill
Once enamel loses its gloss, it stains more easily, and scrubbing it wears it down further. That’s the point where re-enamelling makes sense.
The things clients typically mention when they call include:
- A coloured bath you want in white
- Several chips and rust patches
- A dull, rough surface that won’t come clean
- An original cast iron bath that needs restoring
Questions to ask before you book
- Whether a trained technician does the job
- What preparation is included
- How to care for the finish
- What protection goes down before work starts
The process
The work is clean and fairly quiet. We protect the area first, then the work takes a full day. Before we leave, we explain the curing time and the aftercare.
- First we protect the bathroom and set up ventilation.
- We clean and degrease the bath and repair any chips or rust.
- We key the surface and put on a bonding primer.
- We spray on the new enamel finish in several coats.
- Once cured, normally by the following day, the bath is ready.
Before we arrive
- Plan for the room to be out of bounds to pets and children
- Keep a parking space free if you can
- Open a window if you can
Getting a price
Upload a photo of the damage and a wider shot of the entire item, with your WR10 postcode, and we will reply with a fixed price.
Related advice
Your questions about bath re-enamelling in Hill
Can you re-enamel a roll-top bath?
Yes, roll-tops are a big part of our work. The inside is resurfaced, and we can refinish the outside as well.
Do you cover the whole of Worcestershire?
We cover the entire UK, including Hill and the rest of Worcestershire. Just include your postcode and we’ll offer you dates.
Can pets and children be at home?
On the day, the room should be kept clear of pets and children, mainly so nothing gets touched before it has cured.
How soon can you come?
That depends on our diary for your area. Send photos with your postcode and we’ll reply with the earliest dates.
What happens if you find more damage?
If we find something the photos didn’t show, we explain it first. You decide whether to go ahead.
How long will the bath be out of use?
Usually a day, then it’s ready to use the following day. A badly pitted bath can need a second day.
It’s been repaired before. Can you still fix it?
Generally, yes. The old repair comes out first.
Do you hold any accreditations?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Should I try a DIY kit first?
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
Keeping it looking good
Simple care helps the repair last. Our advice:
- Keep toiletries on a shelf rather than in the bath
- Never use suction bath mats
- Repair dripping taps early
- Clean with a soft cloth and mild detergent
Treat the new finish gently at first: give it the full curing time, then clean it gently. From then on, avoid abrasives and suction mats.
On a worn bath, rust spots keep spreading, and each one adds to the preparation. It’s simpler to resurface before they spread.
About our accreditations · Every repair comes with a one-year guarantee.
