Torfaen · Wales
Bath re-enamelling & resurfacing in Lower New Inn, Torfaen
Problem with your bath in Lower New Inn? We put it right where it is, match it on site and back it with a one-year guarantee.
- Resurfacing from £350
- A dull, rough surface that will not come clean
- Brown or grey marks that do not clean off
Bath re-enamelling in Lower New Inn without replacing anything
After cleaning, repairing and priming, we spray on the new finish. Most of the work, and most of the durability, is in the preparation, and we take our time over it. We regularly repair Victorian roll-tops, pressed steel baths and acrylic baths, and people most frequently call us about a coloured bath you want in white and a roll-top that’s seen better days.
The work is covered for a year after we finish. Just call us if there is a problem and we’ll sort it.
- Location
- Lower New Inn (NP4)
- Region
- Torfaen
- Cover
- One year on every repair
- Quotes
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
What we cannot put right
We will always be straight with you, so here’s what a repair can’t fix:
- Acrylic that moves when you stand in it
- Anything hidden under an old coating, until we remove it
- Holes rusted through the metal
Send us pictures and we will tell you honestly.
Materials we repair
- Victorian roll-tops
- Pressed steel baths
- Basins & shower trays
- Cast iron baths
- Acrylic baths
How we price bath re-enamelling
Resurfacing from £350. We charge the same across the UK, including Lower New Inn. The price reflects:
- Any earlier repairs that need removing first
- The colour and finish to match
- Doing more than one item at once
- What kind of damage it is
The price reflects the work involved, not where you live. You will see the full price before you book.
Send photos for a quote
Most quotes are done from photos alone. To help us price it:
- Any details about the material
- Good light, ideally daylight, without flash glare
- A close-up of the damage, in focus
- A coin beside the damage so we can judge size
For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we’ll send back a fixed quote and some dates.
DIY repairs versus a professional job
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
If you are set on a kit, follow its instructions closely and work on a clean, dry surface, and don’t use it until it has fully cured. If it fails, we can still put it right.
Our work in Lower New Inn
Lower New Inn is about 1 mile south-east of Pontypool, in Torfaen. Our technicians come to homes and businesses in Lower New Inn and nearby villages, so you don’t need to take anything anywhere. Our technicians cover 67 places in Torfaen. You can also see our page for Birmingham, about 72 miles away.
Every address in NP4 is covered, from the main roads to the quietest streets. Local streets include Newport Road, Lancaster Road and Pont-y-Felin Lane. Neighbouring places we cover include Pontyfelin (1 mile south-west), New Inn (1 mile north), Pant-teg (1 mile west), Sebastopol (1 mile south-west) and Griffithstown (1 mile west). Within a short drive, we also cover Cwmbrân (3 miles south), Abersychan (4 miles north-west), Blaenavon (7 miles north-west), St Dials (3 miles south-west), Fairwater (3 miles south-west) and Greenmeadow (3 miles south-west).
Local landmarks in Lower New Inn
In Lower New Inn, that means homes near West Monmouth Comprehensive School, Lower New Inn and New Inn Primary School and the streets around them. You will also find New Inn Chapel (under half a mile north) and Pontypool Park (1.6 miles north-west). The nearest railway station is Pontypool and New Inn station, roughly 1 mile north of the centre. Other landmarks nearby include Cwmbran Shopping Centre (2.2 miles south) and County Hospital (0.9 miles north-west). Green spaces nearby include Sluvad Hill and Cwm Lickey Lake.
- Local facilities include St Cadocs and Penygarn (2.3 miles north-west)
Looking after it afterwards
A little care keeps the finish looking good. Our advice:
- Do not let dyes or oils sit on the finish
- Don’t leave bottles, razors or sponges standing on the surface
- Repair dripping taps early
- Leave the bath for the full curing time before using it
Rinse away dyes, oils and bath bombs straight after use, because they can mark the finish. Repair dripping taps promptly.
Do not try to scrub a worn bath back to shine. It just wears the enamel further.
Your questions about bath re-enamelling in Lower New Inn
Do you need to take the bath out?
Not at all. We work on the bath in place, with the room protected and ventilated.
Do I need to be at home?
We need someone to let us in. You do not need to watch us work.
I’m a tenant. Can you help?
Of course. Check with your landlord; we can send the quote to them too.
Is there any odour?
There may be a mild smell during the work.
Can you re-enamel a roll-top bath?
Yes. We can do the inside and outside.
Does re-enamelling smell?
A little, during the work. We set up ventilation and the smell fades as it cures.
Can you price it without visiting?
In nearly every case. If photos do not show enough, we’ll ask for another angle.
Is it worth repairing rather than replacing?
Usually, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. If replacing would be better, we will say so.
Places near Lower New Inn
More services for Lower New Inn
Repair or replace in Lower New Inn?
If the bath is sound, re-enamelling is generally much cheaper than replacing it, when you count removal, plumbing, tiling and decorating. It’s much quicker too. Our bath re-enamelling starts from £350. We charge the same wherever you are, so there’s no premium for Lower New Inn. What changes the price is the job itself: the material, the amount of damage and how many items.
Why Lower New Inn customers choose us
- Nothing taken out or refitted
- Straight answers about what a repair can do
- Colour mixed on the day to match
- CHAS, Constructionline and SafeContractor accredited
See our prices page and bath cost comparison.
Repairs by material
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we pay close attention there.
How it works
Here’s how a visit normally runs: we arrive at the agreed slot, protect everything around the work area, do the job and tidy away. Plan for the best part of a day. Before we go, we will explain when it can be used and what to avoid for the first few days.
- We mask and protect the room and ventilate it.
- The bath is cleaned, degreased and any chips or rust repaired.
- We prepare the surface and apply a bonding primer.
- Several coats of new finish are sprayed on.
- We leave it to cure, and it’s typically ready the day after.
Getting ready for the visit
- Keep a parking space free if you can
- Have a window or extractor fan available
- Let us know about parking or access
Ask for a price
We price from pictures so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and we will come back with a fixed figure.
Related advice
When to call us in Lower New Inn
A dull surface stains and holds dirt, and cleaning harder only makes it worse. At that stage, resurfacing is the fix.
The most common problems we are called about are:
- A coating lifting around the plughole
- A roll-top that’s seen better days
- Brown or grey marks that don’t clean off
- Enamel that is lost its shine and feels rough
What your quote should include
- How the room is protected while they work
- How the colour is matched
- Whether the price covers travel
- What happens if they find more damage
About our accreditations · Every repair comes with a one-year guarantee.
