Northumberland · England
Bath Re-enamelling in Lynemouth
Our repair technicians come to Lynemouth for full bath re-enamelling and resurfacing. Nothing is taken out, and the work is guaranteed.
- Resurfacing from £350
- A coloured bath you want in white
- Several chips and rust patches
Bath re-enamelling at your home in Lynemouth
Most baths are re-enamelled in a day, with the bath ready to use the following day. Taps, tiles, panels and plumbing all stay in place. Common call-outs are for a period or roll-top bath worth keeping and a coloured bath you want in white, across pressed steel baths, Victorian roll-tops and acrylic baths.
The work is covered for a year after we finish. Just call us if there is a problem and we’ll come back.
- Where
- Lynemouth (NE61)
- Region
- Northumberland
- Warranty
- A year, on every repair
- Price
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
DIY kit or professional repair?
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is usually the cheaper route.
We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.
Your questions about bath re-enamelling in Lynemouth
Do the materials smell?
There may be a mild smell during the work, which fades afterwards.
Do you cover the entire of Northumberland?
We work UK-wide. Our prices are the same everywhere.
Are you accredited?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Is a repair better than a new one?
Usually, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. We’ll tell you honestly if replacement makes more sense.
Will it make a mess?
Dust sheets and masking go down before we start, and we clean up when we have finished.
Can you repair something that’s been repaired before?
Usually, yes. We remove the old repair before doing a new one.
Will the price change on the day?
The price is fixed for what the photos show. If there’s more, we will tell you before starting.
Is there a smell?
A little, during the work. We set up ventilation and the smell fades as it cures.
How the visit works
When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take a full day. We tidy up before we leave and tell you when it’s ready to use.
- We mask and protect the room and ventilate it.
- We clean and degrease the bath and repair any chips or rust.
- We prepare the surface and apply a bonding primer.
- We spray on the new enamel finish in several coats.
- Once cured, normally by the next day, the bath is ready.
Preparing for the visit
- Keep a parking space free if you can
- Tell us about parking, stairs or access
- Plan for the room to be out of bounds to pets and children
Ask for a price
You do not need a survey visit. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.
Advice
Other services in Lynemouth
How to care for the repair
Aftercare is simple:
- Avoid suction-cup mats
- Fix dripping taps quickly
- Don’t leave a chip unrepaired
- Keep toiletries on a shelf rather than in the bath
Dry the bath after use if possible, especially in hard water areas, and rinse off any bath products.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
Lynemouth and the surrounding area
Lynemouth is about 2 miles north of Ashington, in Northumberland. Whether you’re in the middle of Lynemouth or on the outskirts, the service is the same: fixed prices, tidy work and a one-year guarantee. We work in 189 places across Northumberland. You can also see our page for Newcastle upon Tyne, about 16 miles away.
We work across the NE61 postcode area and the streets around it. Local streets include Matlock Square, Neville Square and West Market Street, all of which we cover. Nearby, we also work in Ellington (1 mile north-west), Woodhorn (1 mile south), Cresswell (2 miles north), Linton (2 miles west) and Newbiggin-by-the-Sea (2 miles south-east). Further out, we also cover Blyth (6 miles south), Cramlington (9 miles south), Morpeth (7 miles south-west), Bedlington (6 miles south), Alnwick (15 miles north-west) and Newsham (7 miles south).
Near you in Lynemouth
Our clients here include homes close to St Aidan Lynemouth and Ellington Primary School, among other places. The closest station to Lynemouth is Ashington station, about 2.5 miles south-west of the centre. Other landmarks nearby include Wansbeck General Hospital (1.9 miles south) and Cresswell Castle (1.5 miles north).
- Other local spots include Newbiggin by the Sea Urban District (2.2 miles south-east)
What a repair can’t fix
We will not take on work that won’t last, so here’s what a repair cannot put right:
- A bath split right through the body
- Steel that has corroded right through
- Acrylic that moves when you stand in it
If in doubt, send photos and we will say what we think before you book.
Materials we repair
- Victorian roll-tops
- Basins & shower trays
- Acrylic baths
- Pressed steel baths
- Cast iron baths
Should you replace it?
If the bath is sound, re-enamelling is typically much cheaper than replacing it, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s much quicker too. Our bath re-enamelling starts from £350. The price depends on the type and amount of damage, what it’s made of and how many items we do on one visit. We give a fixed quote from your pictures, so you know the cost before you book.
What you get with us
- Same prices wherever you are
- We come to you, anywhere in the UK
- Honest advice, even when it means no job
- A fixed quote before booking
Take a look at our pricing or resurfacing vs replacement cost guide.
Materials and what they mean for the repair
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that’s what we repair.
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. It must be solid and not flex underfoot.
For landlords and businesses
For developers and builders, we fix damage before handover. We can visit several plots in one trip to keep costs down.
Letting agents frequently send us pictures straight from the inventory. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
What bath re-enamelling costs
Prices start from £350. There’s no charge for travel to Lynemouth. The price depends on:
- The material
- What kind of damage it is
- Whether old repairs or coatings need taking off
- How hard the colour is to match
We don’t add extras on the day. What we quote from your photos is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Quotes from your pictures
You can take the photos on your phone. Just make sure we can see:
- A wider photo showing the entire bath
- One sharp close-up of the damage
- What it’s made of, if you know
- Details of any past repairs
For a price in Lynemouth, the easiest route is pictures: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
About our accreditations · Every repair comes with a one-year guarantee.
