Lincolnshire · England
Bath Re-enamelling for Maltby le Marsh homes
Bath re-enamelling in and around Maltby le Marsh: a fixed quote from photos, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- Worn patches where water runs and sits
- A peeling or bubbling previous coating
What a repair can’t fix
A few problems are outside what a surface repair can do:
- An acrylic bath that flexes badly underfoot
- Problems we can’t see until an old finish comes off
- Leaking taps or wastes (a plumber’s job)
If in doubt, send photos and we’ll say what we think.
Materials we work on in Maltby le Marsh
- Cast iron baths
- Acrylic baths
- Victorian roll-tops
- Basins & shower trays
- Pressed steel baths
Bath re-enamelling in Maltby le Marsh, done in place
Re-enamelling gives a worn bath a new glossy surface without a refit. It suits baths that are dull, stained, rough or chipped all over. We’re frequently asked to fix an outdated colour you’d like to change and brown or grey marks that don’t clean off, across cast iron baths, Victorian roll-tops and acrylic baths.
We guarantee the work for a year. If something is not right in that time, we come back and put it right.
- Location
- Maltby le Marsh (LN13)
- Region
- Lincolnshire
- Guarantee
- One year on every repair
- Price
- From £350. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Places near Maltby le Marsh
Other services in Maltby le Marsh
DIY kit or professional repair?
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
A DIY attempt is not a disaster. We remove the old filler and start again, so it won’t stop us repairing it. Just mention it when you send photos, as it can add time.
Covering Maltby le Marsh
Maltby le Marsh is about 9 miles south-east of Louth, in Lincolnshire. We agree a date that works for you, and we’ll give you an arrival time in advance, so you are not left waiting in all day. We work in 732 places in Lincolnshire. Our nearest city page is Leeds, about 80 miles away.
We work across LN13. Local streets include Stoneleigh Farm Drive, Hodgetoft Lane and Beesby Road, all of which we cover. Other places close to Maltby le Marsh include Thorpe (2 miles east), Mablethorpe (3 miles north-east), Trusthorpe (3 miles east), Sutton on Sea (3 miles east) and Sandilands (4 miles east). Further out, we also cover Louth (9 miles north-west), Skegness (13 miles south-east), Horncastle (15 miles south-west), Spilsby (11 miles south-west), Alford (4 miles south) and Chapel St Leonards (8 miles south-east).
Local landmarks in Maltby le Marsh
Our customers here include homes close to Turks Head pub and Church Of All Saints. A little further out are Alford and District War Memorial Cottage Hospital (4.1 miles south).
Should you replace it?
A new bath means a plumber, removing a heavy bath, making good the walls and tiles and days without a bathroom. Re-enamelling gives the bath a new finish without moving it. Resurfacing from £350, with every job priced individually. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send pictures and you will get a fixed figure.
Why Maltby le Marsh customers choose us
- Every repair guaranteed for a year
- A fixed quote before booking
- Colour mixed on the day to match
- Straight answers about what a repair can do
See our pricing and guide to resurfacing and replacement costs.
What your bath is made of matters
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Prices and what affects them
Prices start from £350. We give every job a fixed quote from pictures. These are the things that affect it:
- The type of damage
- Whether we combine several jobs
- The colour and finish to match
- The size and number of damaged areas
We do not add extras on the day. What we quote from your photos is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Quotes from your pictures
We price nearly every job from photos. This is what to send:
- Any details about the material
- A coin beside the damage so we can judge size
- Your postcode, so we can check dates
- Good light, ideally daylight, without flash glare
To get a price, send two or three pictures using our quote form or ring us. We’ll tell you honestly whether it can be repaired.
How the visit works
The work is clean and fairly quiet, so you can stay at home while we’re there. We protect the area first, then the work takes most of the day. Before we leave, we explain the curing time and the aftercare.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures.
Getting ready for the visit
- Clear the area around the damage
- Keep children and pets away from the room on the day
- Let us know about parking or access
How to get a price
Most customers in Maltby le Marsh get their price from pictures. Tell us what happened and where you are, and we will send back a fixed quote and some dates.
Advice
For landlords and businesses
We carry out planned and one-off repairs for housing associations and facilities teams in Lincolnshire and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.
We regularly work with letting and managing agents. Just send photos, the address and how to get access.
Do you need bath re-enamelling in Maltby le Marsh?
By the time a bath is a few decades old, it may have a mix of issues: worn patches, chips, rust spots and stains. Resurfacing sorts them out together.
If you can see any of these, send us a picture:
- Chips and rust in more than one place
- A bath that stays dull however much you clean it
- Worn patches where water runs and sits
- A bath in a colour that no longer suits
Comparing quotes
- The length of the guarantee and what it covers
- Aftercare advice
- How changes to the job are handled
- Whether the price covers travel
Maltby le Marsh: your questions answered
Is it messy?
No. The work area is masked and covered, and we leave the room clean.
Are there extra charges for Maltby le Marsh?
There’s no separate call-out charge. The fixed quote covers the visit and the work.
Can you make a coloured bath white?
Yes. We can resurface a coloured bath in white, and we can do the rest of the suite as well.
How much does bath re-enamelling cost in Maltby le Marsh?
Prices start from £350. We give a fixed price based on pictures of the damage. Send a close-up of the damage and a wider photo and your postcode.
Is repairing better than replacing?
Usually, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. If replacing would be better, we’ll say so.
Can you price it without visiting?
Yes, almost always. Clear photos let us give you a fixed quote without visiting.
It’s been repaired before. Can you still fix it?
Yes, regularly. Removing the old work can add time, and that is in the quote.
Can you do more than one item on the same visit?
Yes. Doing several items on one visit normally costs less than separate visits. Include photos of each item.
About our accreditations · Every repair comes with a one-year guarantee.
