Shropshire · England
Bath re-enamelling & resurfacing in Mamble, Shropshire
Fixed-price bath re-enamelling in Mamble and the surrounding area, usually in one visit.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- An old resurfacing that is failing
Landlord and trade work in Mamble
We are used to working with agents and managing companies. Just send pictures, the address and how to get access and we’ll handle the rest.
For anyone letting property in or around Mamble, we can repair and quote for several addresses together. Send photos for each one and we’ll come back with a combined price.
How we handle bath re-enamelling in Mamble
Re-enamelling works especially well on cast iron and steel, and we can resurface acrylic baths as well. The result is a smooth, even, glossy finish. We work on pressed steel baths, cast iron baths and Victorian roll-tops, and common reasons people contact us are worn patches where water runs and sits and an original cast iron bath that needs restoring.
Peace of mind is built in: our one-year guarantee applies to every job, and we explain what it covers before booking.
- Location
- Mamble (DY14)
- County
- Shropshire
- Warranty
- A year, on every repair
- Price
- From £350. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
How it works
You do not need to empty the room. Everything we use comes in the van with us, put protection down and start once you are happy with the plan. It normally takes the best part of a day, and you can get on with other things while we are there.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures until the following day.
Preparing for the visit
- Avoid using the area for a few hours before we arrive
- Ensure the room can be ventilated
- Tell us about parking, stairs or access
Getting a price
There’s no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.
Related advice
About Mamble
Mamble is about 7 miles west of Stourport-on-Severn, in Shropshire. Customers in Mamble get the same service as everywhere else we cover: a fixed price from your pictures, then a visit to do the work. Mamble is one of 433 places in Shropshire we cover. You can also see our page for Birmingham, about 26 miles away.
Jobs in DY14 work the same way as everywhere else we cover. Other places close to Mamble include Bayton (1 mile north-east), Bayton Common (2 miles north-east), Clows Top (2 miles east), Menithwood (2 miles south-east) and Eardiston (2 miles south). Further out, we also cover Bridgnorth (14 miles north), Ludlow (11 miles west), Cleobury Mortimer (3 miles north), Highley (8 miles north), Alveley (9 miles north-east) and East Hamlet (11 miles west).
What’s near Mamble
Around Mamble, we work in homes near Church of St John the Baptist, Bayton CofE Primary School and The Sun And Slipper Public House, among other places. Further afield, we also cover the area around Eastham Bridge mound (2.3 miles south-west). Open spaces near Mamble include Hunthouse Wood.
What affects the price in Mamble
Prices start from £350. A fixed quote means you know the cost before booking. We look at:
- Where the damage is and how we get to it
- What kind of damage it is
- The material
- The colour and finish to match
We do not add extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.
How to get a fixed price
Most quotes are done from photos alone. To make it quick:
- A coin beside the damage so we can judge size
- Any details about the material
- A wider photo showing the entire bath
- Where you are, by postcode
For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we’ll send back a fixed quote and some dates.
When to call us in Mamble
Older baths frequently have several problems at once: dull areas, chips, rust and staining. Re-enamelling deals with all of them in one go.
Get in touch if you’ve noticed:
- Chips and rust in more than one place
- A bath that stays dull however much you clean it
- A coloured bath you want in white
- A peeling or bubbling previous coating
What your quote should include
- Whether the price covers travel
- Whether the price is fixed and includes VAT
- What happens if the damage is worse than the photos show
- The length of the guarantee and what it covers
Different materials, different repairs
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Steel often rusts by the plughole, so we check it carefully.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Nearby places to Mamble
More services for Mamble
Your questions about bath re-enamelling in Mamble
Can you fix a peeling bath coating?
Generally, yes. We strip the failing coating and resurface it properly. Mention it when you send pictures.
Is there any odour?
There may be a mild smell during the work that clears as it cures.
When can you do it?
It depends on the time of year and where you are. Send photos with your postcode and we’ll reply with the earliest dates.
Are you a vetted contractor?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Is there a guarantee?
Yes, for a year. If there is a problem with the work in that time, we come back and put it right.
Do you cover the entire of Shropshire?
The whole UK, including all of Shropshire. Send your postcode with your photos and we will offer you dates.
Is there a call-out fee?
There is no separate call-out charge. Your fixed price includes everything.
Is repairing better than replacing?
Normally, if the item is otherwise sound. A repair avoids removal and making good. If replacing would be better, we will say so.
Can I fix it myself?
If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and don’t use it until it has fully cured. If it does not work out, we can still repair it properly.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
Keeping it looking good
How the surface is treated afterwards matters. Here’s what we suggest:
- Get any chip repaired quickly
- Don’t use the bath until it has fully cured
- Keep toiletries on a shelf rather than in the bath
- Use washing-up liquid and a soft cloth
Give the finish its full curing time before using the bath. After that, a soft cloth and washing-up liquid is all it needs.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Acting earlier keeps the preparation simpler.
Why repair rather than replace?
A refit takes several trades and several days. Re-enamelling takes one technician and generally one day, with the bath ready the following day. Resurfacing from £350, with every job priced individually. Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access, and doing several items at once reduces it.
Why choose Surface Doctor in Mamble
- No extra charge for your area
- Free fixed quotes from pictures
- We come to you, anywhere in the UK
- Most jobs done in one visit
Take a look at our pricing or bath cost comparison.
About our accreditations · Every repair comes with a one-year guarantee.
