Shropshire · England
Bath Re-enamelling in Bayton Common
Bath re-enamelling in Bayton Common without the cost of replacing. Send us pictures for a fixed price, then book a visit.
- Resurfacing from £350
- Enamel that is lost its shine and feels rough
- An outdated colour you’d like to change
How we handle bath re-enamelling in Bayton Common
We do not move the bath, so your taps, tiles and plumbing are left alone. Most baths are done in one visit, and can be used again the day after. We regularly repair pressed steel baths, acrylic baths and basins & shower trays, and people most often call us about thin, worn enamel in places and a bath that stays dull however much you clean it.
The work is covered for a year after we finish. Just call us if there is a problem and we will come back.
- Location
- Bayton Common (DY14)
- County
- Shropshire
- Warranty
- A year, on every repair
- Price
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Landlord and trade work in Bayton Common
We regularly work with letting and managing agents. Just send photos, the address and how to get access and we will arrange it.
We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
What happens on the day
Visits start with a quick look at the job together, so you know exactly what we are doing. After that, protection goes down around the work area and we start. You can expect it to take most of the day, and we’ll keep you posted as we go.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Before we arrive
- Clear the area around the damage
- Point us to the nearest place to park
- Open a window if you can
Getting a price
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, add your postcode and send them to us. What comes back is a fixed quote, not a guess.
Related advice
What affects the price in Bayton Common
Prices start from £350. We don’t charge extra for travel to Bayton Common. The price comes down to:
- What the surface is made of
- What kind of damage it is
- Unusual colours or finishes
- Whether we combine several jobs
Compared with replacing, repairing usually costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.
Getting a price from pictures
It only takes a minute to photograph the damage. Please include:
- Any details about the material
- Your postcode, so we can check dates
- Any earlier repairs or coatings
- Natural light rather than flash
No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through.
Different materials, different repairs
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so a new finish makes them look new again.
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Can I fix it myself?
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
Questions from Bayton Common
How much does bath re-enamelling cost in Bayton Common?
Prices start from £350. Every job gets a fixed quote from your photos. Send a close-up of the damage and a wider photo and your postcode.
How long does re-enamelling take?
Generally one day, with the bath ready the following day. Deeply pitted baths may need a second day.
Do I have to be there?
Someone needs to let us in and show us the job. You don’t need to watch us work.
What areas do you cover?
All of Shropshire, and the rest of the UK. Travel is included in the price.
Will you leave a mess?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
Do you need to take the bath out?
No, it stays where it is. Everything is done in your bathroom, with the room protected and ventilated.
Is a repair better than a new one?
Usually, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. If replacing would be better, we will say so.
What happens if you find more damage?
Your quote covers the damage in the pictures. If there’s more, we’ll tell you before starting.
Also near Bayton Common
More services for Bayton Common
What we are called out for in Bayton Common
Hard water speeds up the wear, and abrasive cleaners do the most damage.
You may need us if you’ve spotted any of these:
- A coloured bath you want in white
- Enamel that is lost its shine and feels rough
- A peeling or bubbling previous coating
- Staining under the taps and around the waste
Comparing quotes
- What preparation is included
- Whether they match the colour on site
- Aftercare advice
- Who turns up on the day
What we cannot put right
In fairness, some problems need a different fix:
- A bath that is rusted through
- A poorly supported acrylic bath, until it’s firmed up
- A cast iron or steel bath that’s cracked right through
Send us pictures and we will tell you honestly before booking.
What we work on
- Cast iron baths
- Acrylic baths
- Basins & shower trays
- Pressed steel baths
- Victorian roll-tops
Bayton Common and the surrounding area
Bayton Common is about 6 miles west of Stourport-on-Severn, in Shropshire. We work in every kind of home, old or new, large or small, plus businesses and rented homes. We work in all 433 towns and villages across Shropshire, from the larger towns to small villages. Our nearest city page is Birmingham, about 24 miles away.
All of DY14 is covered. If you’re just outside Bayton Common, we cover Clows Top (1 mile south), Bayton (1 mile west), Lem Hill (2 miles north-east), Mamble (2 miles south-west) and Menithwood (2 miles south). Larger places within reach include Bridgnorth (13 miles north), Ludlow (12 miles west), Cleobury Mortimer (3 miles north-west), Highley (7 miles north), Alveley (8 miles north-east) and East Hamlet (12 miles west).
Landmarks near Bayton Common
Around Bayton Common, we work in homes near Mission Room and Bayton CofE Primary School. A little further out are Eastham Bridge mound (4.1 miles south-west). Open spaces near Bayton Common include Abberley Hill and Hunthouse Wood.
Repairing versus replacing in Bayton Common
A replacement often means several trades over several days. Resurfacing takes one technician and generally a day, and the bath is usable the day after. Resurfacing from £350, with every job priced individually. No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.
Why us?
- Colour-matched on site
- CHAS and Constructionline accredited
- Fixed prices from your pictures
- Most jobs done in one visit
See our pricing or bath cost comparison.
About our accreditations · Every repair comes with a one-year guarantee.
