Shropshire · England
Bath Re-enamelling in Bayton
We travel to Bayton for full bath re-enamelling and resurfacing. Everything is done in place, and the work is guaranteed.
- Resurfacing from £350
- Brown or grey marks that don’t clean off
- A coloured bath you want in white
What bath re-enamelling costs
Prices start from £350. Prices are worked out job by job, from your pictures. What matters most is:
- How hard the colour is to match
- Access to the area
- Whether it’s a chip, crack, burn or wear
- How many items we do on one visit
A repair is priced on what needs doing, not where you live. You will see the full price before you book, with nothing added on the day.
Send photos for a quote
Two or three clear photos are normally enough. It helps if you send:
- Something in shot to show the size
- One sharp close-up of the damage
- The material, if you know it
- One picture of the entire bath
There is no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.
About our bath re-enamelling in Bayton
We don’t move the bath, so the taps, tiles and plumbing are not touched. Most baths are done in one visit, and can be used again the day after. We work on pressed steel baths, Victorian roll-tops and acrylic baths, and the jobs we see most are several chips and rust patches and staining under the taps and around the waste.
All of our repairs are guaranteed for twelve months in Bayton and everywhere else. If something goes wrong with the work, we come back.
- Where
- Bayton (DY14)
- County
- Shropshire
- Guarantee
- 12 months on all our work
- Price
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
How the visit works
Expect a friendly, tidy visit. We confirm the time with you beforehand, protect the area, and get on with the job, which normally takes a full day. If we find something your photos didn’t show, we will explain it before carrying on.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures until the following day.
Before we arrive
- Tell us about parking, stairs or access
- Have somewhere for us to park nearby if possible
- Let the surface dry out before the visit
How to get a price
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job the same day in most cases.
Read more
Towns and villages near Bayton
Also in Bayton
What your bath is made of matters
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Steel frequently rusts by the plughole, so we pay close attention there.
About Bayton
Bayton is about 7 miles west of Stourport-on-Severn, in Shropshire. We agree a date that works for you, and we will give you an arrival time in advance, so you are not left waiting in all day. We work in 433 places in Shropshire, from the larger towns to small villages. Our jobs stretch from Bayton to Birmingham (25 miles away).
Our visits in DY14 work the same way as everywhere else we cover. Whether you live on Clows Top Road and Leasowes or a nearby road, a technician can come to you. Neighbouring places we cover include Bayton Common (1 mile east), Mamble (1 mile south-west), Clows Top (1 mile south-east), Lem Hill (2 miles north-east) and Cleobury Mortimer (2 miles north-west). Further out, we also cover Bridgnorth (12 miles north), Ludlow (11 miles west), Highley (7 miles north), Alveley (8 miles north-east), East Hamlet (11 miles west) and Orleton (13 miles west).
Local landmarks in Bayton
Around Bayton, we work in homes near Bayton CofE Primary School, The Lacon Childe School and Church of St Bartholomew, among other places. Nearby you will also find Eastham Bridge mound (3.5 miles south-west). The countryside around Bayton includes Hunthouse Wood.
Repairing versus replacing in Bayton
A replacement frequently means several trades over several days. Re-enamelling is one technician, usually one day, with the bath back in use the following day. Resurfacing from £350, with every job priced individually. We charge the same wherever you are, so there’s no premium for Bayton. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Why us?
- Colour mixed on the day to match
- One price list for the entire UK
- We come to you, anywhere in the UK
- CHAS and Constructionline accredited
See our pricing and guide to resurfacing and replacement costs.
Signs you need bath re-enamelling in Bayton
Enamel’s shine is only skin deep, and every scrub with an abrasive cleaner takes a little away. After years of use, the surface becomes porous and stains easily.
Send us a photo if you notice any of these:
- Wear marks under the taps
- Several chips and rust patches
- An original cast iron bath that needs restoring
- A coloured bath you want in white
Questions to ask before you book
- How long it needs to cure
- How long the guarantee is and what it covers
- How the colour is matched
- Whether the price is fixed and includes VAT
For landlords and businesses
Housing associations and facilities teams use us for planned and reactive repairs in Shropshire and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.
For anyone letting property in or around Bayton, we can repair and quote for several addresses together. Send photos for each one and we’ll come back with a combined price.
Questions from Bayton
Can you repair something that’s been repaired before?
Yes, we frequently do. Removing the old work can add time, and that is in the quote.
Is there a call-out fee?
There’s no separate call-out charge. Your fixed price includes everything.
Can landlords book you?
We do, regularly. We can quote for several properties together and work between tenancies.
How do I book?
A close-up, a wider photo and your postcode. Then we’ll agree a date.
Do you come to Bayton?
Yes, we do. Repair technicians travel to Bayton from across the region, with no extra charge for travel.
I rent my home. Can I book you?
Yes. Check with your landlord; we can send the quote to them too.
Are you a vetted contractor?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Can you make a coloured bath white?
Yes. We can resurface a coloured bath in white, and we can do the rest of the suite as well.
DIY repairs versus a professional job
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
If you’re set on a kit, follow its instructions closely, and give it the full curing time. If it fails, we can still put it right.
When a repair is not the answer
We would rather lose a job than do one that will not last, so here’s what a repair can’t put right:
- An acrylic bath that flexes badly underfoot
- Leaks from fittings rather than the bath
- A bath that’s rusted through
If in doubt, send pictures and we’ll say what we think before you book.
Materials we work on in Bayton
- Pressed steel baths
- Cast iron baths
- Basins & shower trays
- Victorian roll-tops
- Acrylic baths
About our accreditations · Every repair comes with a one-year guarantee.
