Shropshire · England

Bath Re-enamelling for Alveley homes

We travel to Alveley for full bath re-enamelling and resurfacing. Everything is done in place, and the work is guaranteed.

  • Resurfacing from £350
  • A period or roll-top bath worth keeping
  • A dull, rough surface that will not come clean
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling near Alveley

DIY repairs versus a professional job

You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.

If you are set on a kit, follow its instructions closely, make sure the area is clean and completely dry, and give it the full curing time. If it doesn’t work out, we can still repair it properly.

About our bath re-enamelling in Alveley

We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. Several coats of finish go on over a bonding primer, once the bath has been cleaned, repaired and prepared. We’re frequently asked to fix a dull, rough surface that won’t come clean and thin, worn enamel in places, on acrylic baths, basins & shower trays and pressed steel baths.

Your repair is guaranteed for a year, as with every job we do.

Basin with yellowed glaze resurfaced to a clean white finish
Where
Alveley (WV15)
County
Shropshire
Cover
12 months on all our work
Quotes
From £350. Fixed and free, based on photos
Telephone
0345 017 0787
Updated
23 October 2026

What we are called out for in Alveley

Enamel’s shine is only skin deep, and every scrub with an abrasive cleaner takes a little away. Eventually the surface turns porous and stains.

Most people get in touch when they notice one of these:

  • A period or roll-top bath worth keeping
  • Stains that won’t shift
  • Thin, worn enamel in places
  • A peeling or bubbling previous coating

Before you book anyone

  • The length of the guarantee and what it covers
  • How your room will be protected
  • Whether the colour is mixed to match
  • How soon you can use it again

Choosing a repair company

Repair or replace: which is better?

When the bathroom is fine apart from the bath’s finish, resurfacing is the simplest answer. Nothing else is disturbed. Resurfacing from £350, with every job priced individually. A repair normally costs much less than people expect, particularly next to the cost of replacement. Send photos and we’ll give you the exact figure.

Why Alveley clients choose us

  • Nothing taken out or refitted
  • Dust sheets down, tidy finish
  • Generally one visit, start to finish
  • Colours mixed by hand to suit your surface

See our pricing or resurfacing vs replacement cost guide.

Work for landlords and builders

We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.

Builders use us to fix snagging damage before handover, saving last-minute replacements. Several plots can be done in one visit to keep costs down.

How the visit works

On the day itself, there’s little for you to do. Let us in and show us the room, and we will get on with it. The job generally runs to most of the day.

  1. The room is masked, protected and ventilated.
  2. Next we degrease the bath and fix chips and rust spots.
  3. We prepare the surface and apply a bonding primer.
  4. Several coats of new finish are sprayed on.
  5. We leave it to cure, and it’s typically ready the following day.

Before we arrive

  • Let the surface dry out before the visit
  • Let us know if it has been repaired before
  • Keep a parking space free if you can

Get a quote

No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through.

Get a free quote

Read more

Our work in Alveley

Alveley is about 6 miles south-east of Bridgnorth, in Shropshire. We visit customers in Alveley and the surrounding area, so nothing has to leave your home. Alveley is one of 433 places in Shropshire we cover. Our nearest city page is Birmingham, about 19 miles away.

Here we cover the WV15 postcode area. Streets in the area include Church Road, Daddlebrook Road and Brook Rise, all of which we cover. Other places close to Alveley include Stanley (1 mile south-west), Romsley (1 mile south-east), Highley (2 miles west), Nash End (2 miles south) and Netherton (2 miles south-west). We also work in nearby towns such as Madeley (13 miles north), Bridgnorth (6 miles north-west), Shifnal (14 miles north), Broseley (12 miles north-west), Albrighton (13 miles north) and Much Wenlock (13 miles north-west).

Landmarks near Alveley

Around Alveley, we work in homes near Alveley Primary School, Severn Valley Country Park and Church of St Mary, among other places. A little further out are Glazeley Castle (4.3 miles north-west). Green spaces nearby include Kinver Edge.

Map of Alveley © OpenStreetMap contributors

Keeping it looking good

Good habits make a big difference to how long a repair lasts:

  • Respect the curing time we give you
  • Clean with a soft cloth and mild detergent
  • A dripping tap should be fixed promptly
  • Do not leave bottles, razors or sponges standing on the surface

Use mild, non-abrasive cleaners, avoid suction bath mats, and keep bottles and razors off the surface.

Leave a peeling coating alone. Moisture gets underneath and makes it worse, so it’s better to have it stripped and redone.

Repairs by material

Cast iron

Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so resurfacing gives them a new life.

Pressed steel

Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.

What affects the price in Alveley

Resurfacing from £350. We charge the same across the UK, including Alveley. What changes the price is:

  • How much damage there is
  • Whether we combine several jobs
  • How easy the damage is to reach
  • What the surface is made of

The price reflects the work involved, not where you live. You will see the full price before booking, with no extras added later.

Send photos for a quote

The better the pictures, the more accurate the price. Here’s what we find most useful:

  • Any earlier repairs or coatings
  • Daylight if possible, and no flash reflection
  • Something in shot to show the size
  • A wider photo showing the whole bath

For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we will reply with a fixed quote and the earliest dates we have.

Alveley questions

Can I add another job to the visit?

Yes, and it’s frequently cheaper. Just add the extra items to your photos and we’ll quote them together.

Do you work for landlords and businesses?

We do, regularly. We can quote for several properties together and work between tenancies.

How long does re-enamelling take?

Most baths are done in a day and can be used the day after. We’ll confirm timings when we quote.

What happens next?

We review the pictures and send a fixed quote and the next dates we have.

Do you resurface freestanding baths?

Yes, roll-tops are a big part of our work. The inside is resurfaced, and we can refinish the outside as well.

What does bath re-enamelling cost?

Resurfacing from £350. We give a fixed quote based on photos of the damage. Send a close-up and a picture of the entire item and your postcode.

Can I get a quote without a visit?

Normally, yes. A close-up and a wider photo are enough to give a fixed price.

Someone resurfaced my bath and it’s peeling. Can you help?

In most cases. We strip the failing coating and resurface it properly. Tell us about it when you ask for a quote.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.