Warwickshire · England
Bath Re-enamelling in Mancetter
Local bath re-enamelling for Mancetter: a fixed quote from photos, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- Stains that will not shift
- A coloured bath you want in white
Bath re-enamelling in Mancetter, done in place
We clean, repair and prime the bath before spraying the new finish. The preparation is what makes it last, and we take our time over it. Our repair technicians work on cast iron baths, acrylic baths and Victorian roll-tops, and people most often call us about enamel that’s lost its shine and feels rough and a coating lifting around the plughole.
Every repair comes with our one-year guarantee.
- Location
- Mancetter (CV9)
- Area hub
- Warwickshire
- Warranty
- One year on every repair
- Quotes
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
When to call us in Mancetter
Older baths often have several problems at once: worn patches, chips, rust spots and stains. Resurfacing sorts them out together.
Keep an eye out for these signs:
- Wear marks under the taps
- A coating lifting around the plughole
- A bath that stays dull however much you clean it
- Chips and rust in more than one place
What your quote should include
- How to look after the finish
- How soon you can use it again
- How the room is protected while they work
- A fixed price, and whether VAT is included
Can I fix it myself?
If you’re set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and don’t use it until it has fully cured. If it fails, we can still put it right.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
Repair or replace: which is better?
Replacing the bath means a plumber, removing a heavy bath, re-tiling or making good the walls and days without a bathroom. Re-enamelling gives the bath a new finish with the bath left where it is. Prices start from £350. Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access, and doing several items at once reduces it.
Why book with us
- Fixed prices from your pictures
- Same prices wherever you are
- Technicians who travel to you, UK-wide
- Colours mixed by hand to suit your surface
Read our full price list or bath cost comparison.
Our work in Mancetter
Mancetter is about 4 miles north-west of Nuneaton, in Warwickshire. Wherever you are in the CV9 postcode area, we carry out the work at your property. We cover all 324 towns and villages in Warwickshire. You can also see our page for Birmingham, about 17 miles away.
Here we cover the CV9 postcode area. Streets in the area include Mancetter Road, Cadman Close and Church Walk, and we cover them all. If you are just outside Mancetter, we cover Witherley (1 mile north-east), Atherstone (1 mile north-west), Oldbury (2 miles south), Ratcliffe Culey (2 miles north) and Whittington (2 miles north-west). Larger places within reach include Nuneaton (4 miles south-east), Bedworth (7 miles south), Fordbridge (11 miles south-west), Castle Vale (11 miles west), Chilvers Coton (5 miles south-east) and Camp Hill (3 miles south-east).
What’s near Mancetter
Locally, our jobs take us to homes close to The Old Swan Inn, The Queen Elizabeth Academy and Church of St Peter, among other places. The nearest railway station is Atherstone station, roughly 1.1 miles north-west. Well-known places in the area include George Eliot Hospital (4.6 miles south-east) and Atherstone Heritage Centre (1 mile north-west).
Nearby places to Mancetter
What else we do in Mancetter
Aftercare tips
How the surface is treated afterwards matters:
- Never use suction bath mats
- Respect the curing time we give you
- Do not leave a chip unrepaired
- Rinse off hair dye, oils and bath bombs right away
Wipe the bath dry after use where you can, especially in hard water areas, and rinse away any product left on the surface.
Do not try to scrub a worn bath back to shine. It removes more of the surface.
How we price bath re-enamelling
Resurfacing from £350. Quotes are free and the price is fixed. What we look at:
- Whether old repairs or coatings need taking off
- How easy the damage is to reach
- Doing more than one item at once
- What kind of damage it is
A repair is priced on what needs doing, not where you live. The full price is agreed before booking.
Quotes from your photos
When you take your photos, these tips help us give you a firm price:
- A close-up of the damage, in focus
- Something in shot to show the size
- Daylight if possible, and no flash reflection
- One picture of the whole bath
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, add your postcode and send them over. What comes back is a fixed price, not a guess.
Common questions in Mancetter
What happens after I send pictures?
We come back with a fixed quote, generally with dates to choose from. There is no obligation to book.
Can you repair several things at once?
Yes. Doing several items on one visit usually costs less than separate visits. Send pictures of everything you’d like done.
How soon can you come?
It depends on the time of year and where you are. We’ll offer you dates when we send your quote.
Can you fix a peeling bath coating?
Yes. Removing the old finish takes extra time, which we include in the price.
Can tenants book a repair?
Of course. Check with your landlord; we can send the quote to them too.
Is there a call-out fee?
There’s no separate call-out charge. The fixed price covers the visit and the work.
What information do you need?
Photos of the damage, a picture of the whole bath and your postcode. After that, we just agree a date.
Is there any odour?
It depends on the job, but frequently a little. Ventilation keeps it to a minimum.
What your bath is made of matters
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
The process
Expect a friendly, tidy visit. We agree the arrival time in advance, cover and mask the work area, then carry out the work, which normally takes a full day. If anything looks different from your pictures, we’ll talk to you before going ahead.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures.
How to prepare
- Clear the area around the damage
- Have a window or extractor fan available
- Mention any earlier repairs or resurfacing
Ask for a price
Send us a photo of the damage and a wider shot of the entire item, and tell us you are in Mancetter, and we will come back with a fixed quote.
Advice
What a repair cannot fix
Before you book, it’s worth knowing the limits:
- Leaks from fittings rather than the bath
- A cast iron or steel bath that is cracked right through
- A bath that is rusted through
Not sure? Send photos and we’ll give you a straight answer before booking.
What we work on
- Cast iron baths
- Pressed steel baths
- Acrylic baths
- Victorian roll-tops
- Basins & shower trays
About our accreditations · Every repair comes with a one-year guarantee.
