Kent · England
Bath Re-enamelling for Marden Beech homes
Full bath re-enamelling and resurfacing at your home in Marden Beech, with a one-year guarantee on every repair.
- Resurfacing from £350
- Brown or grey marks that don’t clean off
- An original cast iron bath that needs restoring
Bath re-enamelling in Marden Beech, done in place
We re-enamel a lot of period and roll-top baths, which would be difficult and expensive to replace. Resurfacing them in place keeps the original bath. Typical jobs include an original cast iron bath that needs restoring and chips and rust in more than one place, in acrylic baths, basins & shower trays and Victorian roll-tops.
A one-year guarantee comes as standard, so you’re not left on your own once we have gone.
- Area
- Marden Beech (TN12)
- Area hub
- Kent
- Guarantee
- One year on every repair
- Quote
- From £350. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Covering Marden Beech
Marden Beech is about 8 miles south of Maidstone, in Kent. Book a date that suits you, and we’ll give you an arrival time in advance, so you’re not left waiting in all day. We work in 922 places across Kent, from the larger towns to small villages. You can also see our page for London, about 34 miles away.
All of TN12 is covered, from the main roads to the quietest streets. We also cover the places around Marden Beech: Marden (1 mile north-east), Claygate (2 miles north-west), Brandfold (2 miles south), Capel Cross (2 miles south-west) and Pearson's Green (2 miles west). Larger places within reach include Maidstone (8 miles north), Sevenoaks (15 miles north-west), Royal Tunbridge Wells (9 miles west), Tonbridge (9 miles west), Kings Hill (8 miles north-west) and Foley Park (9 miles north).
Near you in Marden Beech
Around Marden Beech, we work in homes near St Michael and All Angels Church and Marden Primary School, among other places. For rail, the closest station is Marden station, about 1.1 miles north-east. A little further out are South East Romany Museum (1.6 miles north-east).
Landlords, agents and businesses in Marden Beech
We work for landlords, letting agents and housing providers in Marden Beech as well as homeowners. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
Marden Beech: your questions answered
Do the materials smell?
It depends on the job, but often a little. Ventilation keeps it to a minimum.
When can you do it?
It depends on the time of year and where you are. We’ll offer you dates when we send your quote.
What happens next?
We come back with a fixed quote, generally with dates to choose from. There is no obligation to book.
Can pets and children be at home?
We ask you to keep children and pets out of the room while we work and until it has cured. Everywhere else in the home is fine.
Do you work in Marden Beech?
We do. We send a technician to Marden Beech for every job, with no extra charge for travel.
How durable is a resurfaced bath?
It depends on preparation, use and care. Properly prepared and looked after, it lasts well, and our work is guaranteed for a year.
Can you fix a peeling bath coating?
Yes, we do this regularly. Removing the old finish takes extra time, which we include in the price.
Can you make a coloured bath white?
Yes, most people go for white. Tell us what you’d like when you ask for a quote.
Places near Marden Beech
What else we do in Marden Beech
Repair or replace: which is better?
Replacing a cast iron bath is a big job: they’re heavy, often need breaking up, and a new one is not cheap. Resurfacing in place avoids that entirely. Our bath re-enamelling starts from £350. The price reflects the work involved, not your postcode. The full price is agreed before booking, with no extras added later.
What you get with us
- One price list for the whole UK
- A year’s guarantee on all work
- A fixed quote before you book
- Technicians who travel to you, UK-wide
Take a look at our full price list or guide to resurfacing and replacement costs.
How it works
Expect a friendly, tidy visit. We agree the arrival time in advance, protect the area, then carry out the work, which normally takes a full day. If anything looks different from your pictures, we will talk to you before going ahead.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure until the day after.
Getting ready for the visit
- Ensure the area is dry
- Move bottles, mats and clutter away from the area
- Plan for the room to be out of bounds to pets and children
How to get a price
You don’t need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.
Read more
Do you need bath re-enamelling in Marden Beech?
Hard water speeds up the wear, and gritty cleaners are the worst culprits.
Customers generally contact us about:
- Brown or grey marks that don’t clean off
- An original cast iron bath that needs restoring
- A coating lifting around the plughole
- A coloured bath you want in white
What your quote should include
- Whether the colour is mixed to match
- Who turns up on the day
- Is the price fixed, and does it include VAT?
- If travel is included in the price
Honest limits
We would rather lose a job than do one that will not last, so here’s what a repair cannot put right:
- An acrylic bath that flexes badly underfoot
- Holes rusted through the metal
- Plumbing leaks, which need a plumber
Not sure? Send photos and we will give you a straight answer.
Surfaces we repair
- Victorian roll-tops
- Basins & shower trays
- Cast iron baths
- Pressed steel baths
- Acrylic baths
What your bath is made of matters
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Acrylic
Acrylic baths can be resurfaced too, using a system that bonds to acrylic. The bath needs to be firm and well supported.
Prices and what affects them
Prices start from £350. There’s no charge for travel to Marden Beech. The price comes down to:
- Access to the area
- Unusual colours or finishes
- How many items we do on one visit
- What the surface is made of
No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.
Getting a price from photos
Phone pictures are fine. Just make sure we can see:
- Good light, ideally daylight, without flash glare
- Whether it’s been repaired or coated before
- A coin beside the damage so we can judge size
- A wider photo showing the whole bath
Send us a photo of the damage and one of the entire item, and tell us you’re in Marden Beech, and we will come back with a fixed quote.
Should I try a DIY kit first?
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
About our accreditations · Every repair comes with a one-year guarantee.
