Kent · England
Bath Repair in Marden Beech
Problem with your bath in Marden Beech? We repair it in place, mix the colour on the day and guarantee the work for a year.
- Repairs from £95
- A cracked acrylic bath
- Chips along the edge of the bath
Repair or replace: which is better?
Cast iron baths especially are worth keeping: they’re very heavy to remove, especially upstairs, and replacing like for like is not cheap. Repairing it leaves it where it is. Repairs from £95, with every job priced individually. Compared with replacing, repairing usually costs far less, because there’s no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
Why Marden Beech clients choose us
- CHAS and Constructionline accredited
- We’ll tell you if it’s not worth repairing
- Dust sheets down, tidy finish
- Technicians who travel to you, UK-wide
Read our pricing or resurfacing vs replacement cost guide.
Bath repair at your home in Marden Beech
A damaged bath does not have to mean a new bathroom. We fill the damage, shape it to the curve of the bath and refinish it, mixing the colour on the day so the repair is hard to spot. We’re often asked to fix impact holes in acrylic and a failed DIY repair that’s discoloured or lifting, across acrylic, roll-top & freestanding and whirlpool & spa baths.
Every repair comes with our one-year guarantee.
- Where
- Marden Beech (TN12)
- County
- Kent
- Warranty
- One year on every repair
- Quotes
- From £95. Free, fixed price from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Towns and villages near Marden Beech
Also in Marden Beech
Marden Beech and nearby
Marden Beech is about 8 miles south of Maidstone, in Kent. From the centre of Marden Beech to the outlying streets, the service is the same: a fixed price, a tidy visit and a guarantee. We work in 922 places in Kent. We work right across the region, from Marden Beech to London (about 34 miles away).
Every address in TN12 is within our area. Neighbouring places we cover include Marden (1 mile north-east), Claygate (2 miles north-west), Brandfold (2 miles south), Capel Cross (2 miles south-west) and Pearson's Green (2 miles west). Larger places within reach include Maidstone (8 miles north), Sevenoaks (15 miles north-west), Royal Tunbridge Wells (9 miles west), Tonbridge (9 miles west), Kings Hill (8 miles north-west) and Foley Park (9 miles north).
Landmarks near Marden Beech
Around Marden Beech, we work in homes near St Michael and All Angels Church and Marden Primary School, among other places. The nearest railway station is Marden station, about 1.1 miles north-east of the centre. Nearby you’ll also find South East Romany Museum (1.6 miles north-east).
When to call us in Marden Beech
Dropped items cause the majority of chips, and a lot happen during bathroom refits. Cracks in acrylic have a different cause: poor support underneath, so the bath flexes when it’s full.
The things customers typically mention when they call include:
- Chips under the taps
- Chips on the rim or sides
- Rust by the waste and overflow
- A kit repair that didn’t last
What to look for in a quote
- Whether cleaning and preparation are in the price
- A fixed quote, and whether VAT is included
- What happens if they find more damage
- The length of the guarantee and what it covers
What your bath is made of matters
Acrylic
Acrylic feels warm and is light, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Composite and resin
Composite baths are dense and solid, and frequently freestanding. Chips and scratches are filled and matched, in much the same way.
What we cannot put right
Some problems need a builder, plumber or fitter rather than us:
- Rust that has eaten right through a steel bath
- Water coming from the waste or taps rather than the bath
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
Not sure? Send pictures and we will give you a straight answer before booking.
Materials we work on in Marden Beech
- Whirlpool & spa baths
- Pressed steel enamel
- Cast iron enamel
- Roll-top & freestanding
- Acrylic
Landlords, agents and businesses in Marden Beech
We regularly work with letting and managing agents. Just send pictures, the address and how to get access.
We carry out planned and one-off repairs for housing associations and facilities teams in Kent and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.
Aftercare tips
Most damage we see is avoidable. A few tips:
- Rinse it down after each bath
- Stick to mild cleaners and a soft cloth
- Get any new chip repaired before it rusts
- If an acrylic bath flexes, have its feet adjusted
In the first few days, avoid putting weight or bottles on the repair. After that, normal gentle cleaning is fine without abrasive products.
Small chips are quick to repair. Left alone, they stain and can rust, so it’s worth getting them done early.
Prices and what affects them
Repairs from £95. We don’t charge extra for travel to Marden Beech. The price depends on:
- Any earlier repairs that need removing first
- How many items we do on one visit
- Access to the area
- Unusual colours or finishes
A repair usually costs much less than people expect, particularly next to the cost of replacement. Send pictures and we’ll give you the exact figure.
Send pictures for a quote
Good pictures mean an accurate price. Here’s what we find most useful:
- Your postcode, so we can check dates
- Daylight if possible, and no flash reflection
- One picture of the entire bath
- A coin beside the damage so we can judge size
You don’t need a survey visit. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.
The process
We turn up when we said we would and looks over the damage before anything else. Dust sheets and masking tape go down before any work starts. Most visits take a few hours, and the room is left clean and tidy.
- We clean the area and remove any loose enamel or rust.
- Next we fill the damage and sand it smooth and level.
- The colour is mixed on the spot to match your bath.
- We build up the finish and polish it into the surrounding enamel.
- Once it has cured, normally by the following day, the bath is ready to use.
Getting ready for the visit
- Tell us if there are stairs or a lift
- Keep a parking space free if you can
- Have a window or extractor fan available
Get a quote
Send us pictures of the damage and a wider shot of the entire item, and tell us you are in Marden Beech, and we will reply with a fixed price.
Advice
FAQs for Marden Beech
Do you repair coloured baths?
Yes, we match coloured baths too. We tint the finish to your bath on site.
Are you accredited?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Do you come to Marden Beech?
Yes, we do. We send a technician to Marden Beech for every job, with no extra charge for travel.
Is repairing better than replacing?
Normally, when the rest is in good condition. A repair avoids removal and making good. If replacing would be better, we will say so.
Can you repair something that is been repaired before?
In most cases. The old repair comes out first, so let us know about it.
Is there a call-out fee?
There’s no separate call-out charge. The fixed quote covers the visit and the work.
What do you need from me?
Photos of the damage, a photo of the whole bath and your postcode. Then we will agree a date.
What happens next?
We check the damage, the material and your postcode, then reply with a quote with dates.
About our accreditations · Every repair comes with a one-year guarantee.
