Surrey · England
Bath Re-enamelling in Margery
Our repair technicians come to Margery for full bath re-enamelling and resurfacing. Everything is done in place, with a one-year guarantee.
- Resurfacing from £350
- Stains that won’t shift
- A coating lifting around the plughole
About our bath re-enamelling in Margery
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. Several coats of finish go on over a bonding primer, once the bath has been cleaned, repaired and prepared. Whether it’s several chips and rust patches and a peeling or bubbling previous coating, we can generally put it right.
We stand behind the work with a one-year guarantee.
- Where
- Margery (KT20)
- Region
- Surrey
- Warranty
- 12 months on all our work
- Price
- From £350. Free and fixed, from your photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Questions from Margery
Do you need to take the bath out?
No, it stays where it is. We work on the bath in place, with the room protected and ventilated.
Can you repair several things at once?
Yes. Combining jobs on one visit brings the cost down. Send photos of everything you’d like done.
Are there extra charges for Margery?
No. Our quotes include travel, with the same prices everywhere we work.
Does someone need to be in?
We need someone to let us in. After that, you can carry on with your day.
Will there be a smell?
Expect a mild smell while we’re working, which fades afterwards.
Can I get a quote without a visit?
In nearly every case. If photos do not show enough, we will ask for another angle.
How much does bath re-enamelling cost in Margery?
Resurfacing from £350. Because every job differs, we price from pictures. You will get a fixed figure before booking.
It’s been repaired before. Can you still fix it?
Most of the time. Let us know what was used before.
Should I try a DIY kit first?
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is typically cheaper.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
Landlord and trade work in Margery
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
We’re used to working with agents and managing companies. Send the address, pictures and access details and we will arrange it.
Margery and the surrounding area
Margery is about 2 miles north of Reigate, in Surrey. Book a date that suits you, and you’ll know when to expect us, so you’re not left waiting in all day. Margery is one of 395 towns and villages in Surrey we cover. Our nearest city page is London, about 17 miles away.
Every address in KT20 is covered. From Manor Lane, Margery Lane and Mint Lane or a nearby road, we can come to you. Neighbouring places we cover include Mogador (1 mile west), Lower Kingswood (1 mile north-west), Reigate (2 miles south), Kingswood (2 miles north) and Walton on the Hill (2 miles north-west). Further out, we also cover Epsom (6 miles north-west), Horley (6 miles south), Ewell (7 miles north), Walton-on-Thames (12 miles north-west), Caterham (5 miles east) and Dorking (6 miles west).
Landmarks near Margery
In Margery, that means homes near Castle Grounds, Reigate College and Kingswood Primary School and the streets around them. Nearby too are Church of Jesus Christ and the Wisdom of God (0.6 miles north) and Reigate Manor Hotel (0.8 miles south). The nearest railway station is Reigate station, about 1.4 miles south of the centre. Well-known places in the area include East Surrey Hospital (3.4 miles south-east) and The Belfry (2.1 miles south-east). Green spaces nearby include Colley Hill and Reigate Heath.
Prices and what affects them
Resurfacing from £350. We price every job individually, from your photos. The main factors are:
- Doing more than one item at once
- What the surface is made of
- Unusual colours or finishes
- Previous DIY repairs that have to come out
We don’t add extras on the day. What we quote from your photos is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Getting a price from pictures
Phone photos are fine. Ensure they show:
- Your postcode, so we can check dates
- Any details about the material
- A coin beside the damage so we can judge size
- One sharp close-up of the damage
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed price.
Materials and what they mean for the repair
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.
Honest limits
We would rather lose a job than do one that won’t last, so here’s what a repair can’t put right:
- Anything hidden under an old coating, until we remove it
- A bath split right through the body
- Acrylic that moves when you stand in it
Not sure? Send photos and we will give you a straight answer before you book.
Surfaces we repair
- Acrylic baths
- Victorian roll-tops
- Basins & shower trays
- Cast iron baths
- Pressed steel baths
The process
Nothing needs to be moved out of the room. Everything we use comes in the van with us, lay protective sheets and start once you are happy with the plan. Most jobs take most of the day, and you can get on with other things while we’re there.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures until the following day.
How to prepare
- Mention any parking restrictions or tricky access
- Keep pets and children out of the room while we work
- Clear toiletries, mats and anything else from around the area
Getting a price
The quickest way to a price is to send a couple of photos using our quote form or ring us. We will tell you honestly if a repair is the right fix.
Read more
Do you need bath re-enamelling in Margery?
Once enamel loses its gloss, it stains more easily, and scrubbing it wears it down further. That is the point where re-enamelling makes sense.
Typical reasons for a call-out include:
- An outdated colour you’d like to change
- Thin, worn enamel in places
- Enamel that is lost its shine and feels rough
- Brown or grey marks that don’t clean off
What to look for in a quote
- What protection goes down before work starts
- Whether the price is fixed and includes VAT
- The length of the guarantee and what it covers
- Whether there are any call-out or travel charges
Looking after it afterwards
Once the work has cured, treat it gently:
- Avoid suction-cup mats
- Don’t leave a chip unrepaired
- Do not let dyes or oils sit on the finish
- Wipe the bath dry after use in hard water areas
Dry the bath after use if possible, particularly with hard water, and rinse away any product left on the surface.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Resurfacing sooner means less repair work first.
Nearby places to Margery
Other services in Margery
About our accreditations · Every repair comes with a one-year guarantee.
