Surrey · England
Bath re-enamelling & resurfacing in Kingswood, Surrey
Full bath re-enamelling and resurfacing for homeowners, landlords and businesses in Kingswood. Send photos for a free, fixed quote.
- Resurfacing from £350
- A roll-top that’s seen better days
- A bath in a colour that no longer suits
Where we work around Kingswood
Kingswood is about 4 miles south-west of Coulsdon, in Surrey. Jobs in Kingswood are booked in like any other job: a fixed quote from pictures, then a visit to do the work. We cover 395 places in Surrey. We work right across the region, from Kingswood to London (15 miles away).
Here we cover the KT20 postcode area. You’ll find streets such as Beech Drive, Bears Den and Hamilton Place, all of which we cover. Being close to the B2032, Kingswood is simple for us to get to. Nearby, we also work in Tadworth (1 mile north-west), Lower Kingswood (1 mile south), Walton on the Hill (2 miles south-west), Margery (2 miles south) and Mogador (2 miles south). Within a short drive, we also cover Epsom (4 miles north-west), Horley (8 miles south), Redhill (4 miles south-east), Ewell (5 miles north-west), Reigate (4 miles south) and Walton-on-Thames (11 miles north-west).
Near you in Kingswood
We visit homes around Eyhurst Park, Tadworth Primary School and Kingswood Arms. Other local landmarks include Chinthurst School (1.1 miles west), Church of St Andrew (0.5 miles south-west) and The Beacon School (1.7 miles north). There’s a railway station in Kingswood itself: Kingswood station. Well-known places in the area include The Ashley Centre (3.8 miles north-west) and Walton on the Hill (1.7 miles west). For a walk, there’s Colley Hill and Cuddington Meadows.
Bath re-enamelling in Kingswood without replacing anything
We do not move the bath, so the taps, tiles and plumbing are not touched. It normally takes one visit, with the bath ready to use the following day. Our repair technicians work on Victorian roll-tops, acrylic baths and cast iron baths, and common reasons people get in touch are thin, worn enamel in places and a coloured bath you want in white.
You are covered for a year from the day of the repair. If anything is not right, ring us and we will sort it.
- Location
- Kingswood (KT20)
- Area hub
- Surrey
- Cover
- 12 months on all our work
- Quotes
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Why repair rather than replace?
Replacing a cast iron bath is a big job: they’re heavy, often need breaking up, and a new one isn’t cheap. Re-enamelling avoids all of it. Our bath re-enamelling starts from £350. The price reflects the work involved, not where you live. The full price is agreed before booking.
What you get with us
- We’ll tell you if it’s not worth repairing
- One price list for the entire UK
- We come to you, anywhere in the UK
- Every repair guaranteed for a year
Take a look at our pricing or bath cost comparison.
Work for landlords and builders
Letting agents frequently send us pictures straight from the inventory. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
For anyone letting property in or around Kingswood, we’ll quote for several properties at once. Send photos for each one and we will price them together.
Looking after it afterwards
To keep it looking its best:
- A dripping tap should be fixed promptly
- Clean with a soft cloth and mild detergent
- Respect the curing time we give you
- Never use suction bath mats
Wipe the bath dry after use where you can, particularly with hard water, and rinse away any product left on the surface.
On a worn bath, rust spots keep spreading, and each one adds to the preparation. It’s simpler to resurface before they spread.
DIY kit or professional repair?
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it won’t stop us repairing it. Just mention it when you send pictures, as it can add time.
What we’re called out for in Kingswood
The gloss on enamel is thin, and abrasive cleaning slowly wears it away. After years of use, the surface becomes porous and stains easily.
Typical reasons for a call-out include:
- An outdated colour you’d like to change
- Enamel that is lost its shine and feels rough
- Worn patches where water runs and sits
- Lots of chips and rust spots
Questions to ask before you book
- How the colour is matched
- Whether the price covers travel
- How to care for the finish
- What happens if they find more damage
FAQs for Kingswood
Can you repair something that is been repaired before?
Yes, we frequently do. It can add a little time, which we include in the quote.
Do you cover Kingswood?
Yes, we do. Technicians travel to Kingswood from across the region, with no extra charge for travel.
Can you fix a peeling bath coating?
In most cases. The old coating comes off before we resurface it. Mention it when you send photos.
Is there any odour?
Expect a mild smell while we’re working, which fades afterwards.
Can I add another job to the visit?
Yes, and it’s frequently cheaper. Just add the extra items to your pictures and you will get one combined price.
Can you quote from photos?
Typically, yes. A close-up and a wider photo are enough to give a fixed price.
Is there a guarantee?
Yes, for a year. If there is a problem with the work in that time, we come back and put it right.
Does the bath have to be removed?
No. We resurface it in place, so nothing else is disturbed.
What bath re-enamelling costs
Resurfacing from £350. There are no hourly rates or hidden extras. The price depends on:
- Doing more than one item at once
- Any earlier repairs that need removing first
- How easy the damage is to reach
- How many areas need work
We don’t add extras on the day. What we quote from your photos is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Quotes from your pictures
We price nearly every job from photos. This is what to send:
- Natural light rather than flash
- A photo taken from further back
- A close-up of the damage, in focus
- Your postcode, so we can check dates
You do not need a survey visit. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we will reply with a fixed price.
How it works
Expect a friendly, tidy visit. We confirm the time with you beforehand, protect the area, then carry out the work, which typically takes the best part of a day. If we find something your photos didn’t show, we’ll explain it before carrying on.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Getting ready for the visit
- Let the surface dry out before the visit
- Tell us about any previous repairs or coatings
- Mention if the room is upstairs or in a flat
Ask for a price
For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we’ll send back a fixed quote and some dates.
Related advice
What your bath is made of matters
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s what we repair.
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Places near Kingswood
Other services in Kingswood
About our accreditations · Every repair comes with a one-year guarantee.
