Hampshire · England
Bath re-enamelling & resurfacing in Martin, Hampshire
Bath re-enamelling in and around Martin: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- A dull, rough surface that won’t come clean
- A peeling or bubbling previous coating
How we handle bath re-enamelling in Martin
Re-enamelling is a one-day job for most baths. Taps, tiles, panels and plumbing all stay in place. Whether it’s enamel that’s lost its shine and feels rough and a roll-top that’s seen better days, we can typically put it right, whatever the material.
All our work is covered by our one-year guarantee, wherever you are in Hampshire.
- Area
- Martin (SP6)
- Area hub
- Hampshire
- Guarantee
- A year, on every repair
- Quotes
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Different materials, different repairs
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
Common questions in Martin
Do I have to be there?
Yes. We need access to the room while we work, at a time that suits you.
What happens once I’ve sent photos?
You get a fixed price and available dates. If we need another angle, we’ll ask.
How do I book?
Photos of the damage, a picture of the entire bath and your postcode. Then we will agree a date.
How much does bath re-enamelling cost in Martin?
Resurfacing from £350. Because every job differs, we price from photos. You know the full cost before anything is booked.
I’m a tenant. Can you help?
Yes. Ask your landlord first, and we can send them the quote if that helps.
How long does re-enamelling last?
It depends on preparation, use and care. Properly prepared and looked after, it lasts well, and it’s guaranteed for a year.
Do you cover the whole of Hampshire?
The entire UK, including all of Hampshire. Send your postcode with your pictures and we’ll confirm dates.
Can I get a quote without a visit?
Yes, almost always. A close-up and a wider photo are enough to give a fixed quote.
When we would advise against a repair
To be straight with you, there are a few things a repair won’t fix:
- Anything hidden under an old coating, until we remove it
- Plumbing leaks, which need a plumber
- Steel that has corroded right through
Not sure? Send pictures and we’ll give you a straight answer before you book.
Materials we work on in Martin
- Cast iron baths
- Acrylic baths
- Victorian roll-tops
- Pressed steel baths
- Basins & shower trays
Martin and nearby
Martin is about 7 miles north of Verwood, in Hampshire. From the centre of Martin to the outlying streets, we offer exactly the same service: a fixed quote, a tidy visit and a guarantee. We work in all 683 towns and villages across Hampshire, from the larger towns to small villages.
Jobs in SP6 work the same way as everywhere else we cover. We regularly work on streets such as Townsend Lane and Downview Road and the roads around them. Neighbouring places we cover include New Forest (1 mile south-west), Pentridge (2 miles south-west), Rockbourne (3 miles east), Damerham (3 miles south-east) and Croucheston (4 miles north). Further out, we also cover Ringwood (11 miles south-east), Fordingbridge (6 miles south-east), St Leonards (11 miles south), Alderholt (6 miles south-east), Poulner (11 miles south-east) and Ashley Heath (10 miles south).
Local landmarks in Martin
We visit homes around Church of All Saints, among other places. Further afield, we also cover the area around Cranborne Castle Hill (4.5 miles south). The countryside around Martin includes Western Downs.
Places near Martin
Other services in Martin
The process
Your technician turns up when we said we would, introduces themselves and checks the damage against your pictures first. The floor and nearby surfaces are covered before we open a single tin. The work itself takes a full day, and the room is left clean and tidy.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures until the following day.
How to prepare
- Clear toiletries, mats and anything else from around the area
- Keep a parking space free if you can
- Tell us about parking, stairs or access
How to get a price
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, add your postcode and send them to us. You’ll get a fixed quote, not an estimate.
Related advice
What we’re called out for in Martin
Enamel wears gradually. Abrasive cleaners, limescale and years of use dull the surface, generally first under the taps and around the waste.
These are the problems we’re asked about most:
- Lots of chips and rust spots
- An old resurfacing that is failing
- A bath that stays dull however much you clean it
- Worn patches where water runs and sits
Before you book anyone
- Is the price fixed, and does it include VAT?
- How soon you can use it again
- How the colour is matched
- Aftercare advice
Work for landlords and builders
Housing associations and facilities teams use us for planned and reactive repairs. A repair avoids taking out and refitting, which matters when someone is living in the home.
For anyone letting property in or around Martin, we will quote for several properties at once. Just send photos for each address and we will price them together.
DIY kit or professional repair?
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
A DIY attempt is not a disaster. We remove the old filler and start again, so it doesn’t stop a professional repair. Just mention it when you send photos, as it can add time.
Should you replace it?
If you like your bathroom but not your bath’s surface, re-enamelling is the least disruptive fix. Nothing else is disturbed. Prices start from £350. The price depends on the type and amount of damage, the material and how many items we do on one visit. We give a fixed quote from your pictures, so you know the cost before booking.
What you get with us
- Technicians who travel to you, UK-wide
- Free fixed quotes from pictures
- Honest advice, even when it means no job
- One-year guarantee on every repair
See our full price list and bath cost comparison.
What bath re-enamelling costs
Prices start from £350. We give every job a fixed quote from photos. These are the things that affect it:
- How easy the damage is to reach
- The type of damage
- How hard the colour is to match
- The material and finish
Our prices are the same across the UK, with no extra for Martin. The job itself decides the price: how much damage, what it’s made of and how many items.
Getting a price from pictures
Before you send photos, a few simple things make all the difference:
- Something in shot to show the size
- Any earlier repairs or coatings
- Where you are, by postcode
- A clear, close picture of the problem area
Most customers in Martin get their price from photos. Add a line about what happened and your postcode, and we will reply with a fixed quote and the earliest dates we have.
About our accreditations · Every repair comes with a one-year guarantee.
