Wiltshire · England
Bath Re-enamelling for Croucheston homes
Local bath re-enamelling for Croucheston: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- A bath in a colour that no longer suits
- A period or roll-top bath worth keeping
How we price bath re-enamelling
Prices start from £350. Every quote is fixed and free. What we take into account:
- Access to the area
- What kind of damage it is
- The colour and finish to match
- How much damage there is
Set against the cost of replacement, a repair is typically a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Quotes from your photos
You can take the pictures on your phone, there’s no need for anything special. Make sure they show:
- One sharp close-up of the damage
- Natural light rather than flash
- What it’s made of, if you know
- Details of any past repairs
No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you’ll get a fixed figure back.
Bath re-enamelling at your home in Croucheston
When a bath is structurally fine but worn out on the surface, re-enamelling is typically the most cost-effective option. It avoids removal, plumbing and re-tiling. If you’re dealing with an old resurfacing that’s failing and lots of chips and rust spots, we can normally put it right.
The work is covered for a year after we finish. If anything isn’t right, ring us and we will come back.
- Area
- Croucheston (SP5)
- Area hub
- Wiltshire
- Warranty
- One year on every repair
- Quotes
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
When a repair isn’t the answer
A few problems are outside what a surface repair can do:
- Damage hidden under a previous coating, until it’s stripped back
- A bath that’s rusted through
- A metal bath with a through crack
Not sure? Send pictures and we’ll give you a straight answer.
Surfaces we repair
- Cast iron baths
- Basins & shower trays
- Victorian roll-tops
- Acrylic baths
- Pressed steel baths
Repair or replace in Croucheston?
If the bath is sound, re-enamelling is usually much cheaper than replacing it, when you count removal, plumbing, tiling and decorating. It’s also far quicker. Prices start from £350. No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.
Why us?
- Straight answers about what a repair can do
- No extra charge for your area
- A fixed quote before booking
- One-year guarantee on every repair
Take a look at our full price list and bath cost comparison.
Repairs by material
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
How the visit works
On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job normally takes the best part of a day. We clean up when we are done and let you know when you can use it again.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure.
Getting ready for the visit
- Point us to the nearest place to park
- Let us know about parking or access
- Avoid using the area for a few hours before we arrive
Get a quote
The quickest way to a price is to send two or three pictures using our quote form or call us. We’ll say straight away whether it can be repaired.
Related advice
Also near Croucheston
What else we do in Croucheston
What we are called out for in Croucheston
Enamel doesn’t fail overnight. Years of cleaning, hard water and hot baths dull the surface, starting where water runs and sits.
The most common problems we are called about are:
- An original cast iron bath that needs restoring
- Staining under the taps and around the waste
- A bath in a colour that no longer suits
- Lots of chips and rust spots
What your quote should include
- How your room will be protected
- Who turns up on the day
- What the guarantee covers, and for how long
- How changes to the job are handled
DIY kit or professional repair?
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
About Croucheston
Croucheston is about 6 miles south-west of Salisbury, in Wiltshire. Our repair technicians come to homes and businesses in Croucheston and the surrounding area, so there’s no workshop to go to. Our technicians cover 425 places in Wiltshire.
We cover every part of the SP5 postcode area and the streets around it. Local streets include Chapel Lane, Croucheston Drove and Flamstone Street. We also cover the places around Croucheston: Faulston (1 mile north-east), Broad Chalke (2 miles west), Bowerchalke (3 miles south-west), Compton Chamberlayne (4 miles north-west) and Barford St Martin (4 miles north). We also work in nearby towns such as Salisbury (6 miles north-east), Amesbury (11 miles north-east), Bugmore (6 miles north-east), Milford (6 miles north-east), Old Sarum (7 miles north-east) and Harnham (5 miles north-east).
Around Croucheston
In Croucheston, that means homes near The Three Horseshoes pub, among other places. Well-known places in the area include Harvard Hospital (4.8 miles east). Green spaces nearby include Compton Down.
Landlord and trade work in Croucheston
We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
Your questions about bath re-enamelling in Croucheston
Can I add another job to the visit?
Yes. Combining jobs on one visit brings the cost down. Include photos of each item.
Does re-enamelling smell?
There is some smell while the coating is applied, which is why we ventilate the bathroom. It clears as the finish cures.
How do I book?
Use the quote form or ring 0345 017 0787, and we will do the rest.
How long will the bath be out of use?
One day for most baths, ready the next day. We give you timings with the quote.
Can a failed resurfacing be redone?
Yes. Stripping the old coating adds time, so it’s reflected in the quote.
Do you work in Croucheston?
Yes, we do. Technicians travel to Croucheston from across the region, and the price is the same as everywhere else.
Can you repair something that is been repaired before?
Yes, regularly. Removing the old work can add time, and that is in the quote.
Do you need to take the bath out?
No. We resurface it in place, so the tiles and taps stay put.
About our accreditations · Every repair comes with a one-year guarantee.
