Hampshire · England
Bath re-enamelling & resurfacing in Fordingbridge, Hampshire
Bath re-enamelling for Fordingbridge, without a refit. Send us photos for a fixed quote, then we come to you.
- Resurfacing from £350
- An old resurfacing that’s failing
- Stains that will not shift
Prices and what affects them
Prices start from £350. There’s no charge for travel to Fordingbridge. The price comes down to:
- How easy the damage is to reach
- Any earlier repairs that need removing first
- The type of damage
- The colour and finish to match
We do not add extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.
How to get a fixed quote
Good photos mean an accurate price. Here’s what helps:
- Daylight if possible, and no flash reflection
- Where you are, by postcode
- A picture taken from further back
- Whether it’s been repaired or coated before
We price from pictures so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and we will come back with a fixed figure.
About our bath re-enamelling in Fordingbridge
The bath stays where it is, so the taps, tiles and plumbing are not touched. Most baths are done in one visit, and can be used again the next day. We are often asked to fix a coating lifting around the plughole and a roll-top that’s seen better days, across basins & shower trays, pressed steel baths and cast iron baths.
You’re covered for a year from the day of the repair. If anything isn’t right, ring us and we will sort it.
- Where
- Fordingbridge (SP6)
- County
- Hampshire
- Warranty
- 12 months on all our work
- Quotes
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Places near Fordingbridge
More services for Fordingbridge
Landlords, agents and businesses in Fordingbridge
If you manage property in Fordingbridge, we’ll quote for several properties at once. Send photos for each one and we’ll come back with a combined price.
Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We’ll fit around changeovers where we can.
Aftercare tips
To keep it looking its best for years:
- Leave the bath for the full curing time before using it
- Stick to gentle, non-abrasive cleaners
- Wipe the bath dry after use in hard water areas
- Repair dripping taps early
Use mild, non-abrasive cleaners, don’t use suction bath mats, and keep bottles and razors off the surface.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Acting earlier keeps the preparation simpler.
What we do, step by step
Expect a friendly, tidy visit. We confirm the time with you beforehand, protect the area, and get on with the job, which normally takes the best part of a day. If anything looks different from your photos, we will talk to you before going ahead.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure.
Getting ready for the visit
- Mention if the room is upstairs or in a flat
- Open a window if you can
- Point us to the nearest place to park
Ask for a price
Upload a photo of the damage and a wider shot of the entire item, with your SP6 postcode, and we’ll come back with a fixed quote.
Related advice
Questions from Fordingbridge
Can you change the colour of my bath?
Yes, white is the usual choice. Tell us what you’d like when you ask for a quote.
Can you do more than one item on the same visit?
Of course, and it generally saves money. Just add the extra items to your pictures and you will get one combined price.
What happens if you find more damage?
We will show you and explain before doing anything extra. You won’t be charged for anything you haven’t agreed.
Is there any odour?
There may be a mild smell during the work, which fades afterwards.
Someone resurfaced my bath and it’s peeling. Can you help?
Yes. Stripping the old coating adds time, so it’s reflected in the quote.
Can you quote from pictures?
Yes, almost always. A close-up and a wider photo are enough to give a fixed quote.
Is it OK to have pets in the house?
On the day, the room should be kept clear of pets and children, mainly so nothing gets touched before it has cured.
Will there be fumes?
There is some smell while the coating is applied, so we ventilate the room. It clears as the finish cures.
Different materials, different repairs
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. It must be solid and not flex underfoot for the finish to last.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is the part we put right.
Can I fix it myself?
It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is typically the cheaper route.
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
Honest limits
A repair is not right for every job, for example:
- Holes rusted through the metal
- A bath split right through the body
- A poorly supported acrylic bath, until it’s firmed up
Send us photos and we will tell you honestly.
Materials we repair
- Basins & shower trays
- Pressed steel baths
- Cast iron baths
- Victorian roll-tops
- Acrylic baths
Repair or replace: which is better?
Replacing a bath generally involves a plumber, a fitter and a tiler. Resurfacing is one technician, normally in a day, and the bath can be used the day after. Prices start from £350. A repair typically costs much less than people expect, particularly next to the cost of replacement. Send photos and we’ll give you the exact figure.
What you get with us
- Rooms protected and left tidy
- One price list for the whole UK
- No need to remove anything
- Honest advice, even when it means no job
Take a look at our pricing or bath cost comparison.
Covering Fordingbridge
Fordingbridge is about 5 miles north-east of Verwood, in Hampshire. Whether you’re in the middle of Fordingbridge or on the outskirts, the service is the same: fixed prices, tidy work and a one-year guarantee. We cover all 683 towns and villages across Hampshire.
Jobs in SP6 work the same way as everywhere else we cover. Jobs here include addresses on High Street, Station Road and Picket Close and the roads around them. Main roads around Fordingbridge include the A338 and B3078, so getting to you is simple. Close by, we cover Horseport (1 mile south-east), Tinkers Cross (1 mile north), Lower Burgate (1 mile north-east), Criddlestyle (1 mile east) and Stuckton (1 mile south-east). Larger places within reach include Totton (13 miles east), Romsey (14 miles east), New Milton (13 miles south-east), Ringwood (6 miles south), Barton on Sea (14 miles south-east) and Marchwood (15 miles east).
Local landmarks in Fordingbridge
Locally, our jobs take us to homes close to The Burgate School and Sixth Form, Fordingbridge Junior School and The Ship Inn, among other places. Well-known places in the area include Godshill Castle Hill (1.6 miles north-east) and Fordingbridge Museum (within half a mile south-east). The countryside around Fordingbridge includes Blashford Lakes and Linbrook Lake.
About our accreditations · Every repair comes with a one-year guarantee.
