Cheshire East · England
Bath re-enamelling & resurfacing in Marton, Cheshire East
Damaged bath in Marton? We put it right where it is, match it on site and back it with a one-year guarantee.
- Resurfacing from £350
- A coating lifting around the plughole
- A period or roll-top bath worth keeping
Bath re-enamelling in Marton, done in place
We clean, repair and prime the bath before spraying the new finish. Most of the work, and most of the durability, is in the preparation, so we don’t cut corners on it. If you are dealing with a coloured bath you want in white and worn patches where water runs and sits, we can usually put it right, on acrylic baths, basins & shower trays and Victorian roll-tops alike.
You are covered for a year from the day of the repair. Just call us if there’s a problem and we will come back.
- Where
- Marton (SK11)
- Region
- Cheshire East
- Warranty
- A year, on every repair
- Price
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Aftercare tips
Most damage we see is avoidable. These habits help:
- Dry the bath after use to stop limescale
- Don’t let dyes or oils sit on the finish
- Leave the bath for the full curing time before using it
- Use washing-up liquid and a soft cloth
Avoid hair dye, bath bombs and oils sitting on the surface, as they can stain. Fix dripping taps quickly.
Don’t try to scrub a worn bath back to shine. It removes more of the surface.
The process
On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job normally takes a full day. We clean up when we’re done and let you know when you can use it again.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
How to prepare
- Move bottles, mats and clutter away from the area
- Let us know if it has been repaired before
- Let the surface dry out before the visit
Getting a price
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed quote.
Advice
Honest limits
In fairness, some problems need a different fix:
- Leaking taps or wastes (a plumber’s job)
- Damage hidden under a previous coating, until it’s stripped back
- A bath that is rusted through
If in doubt, send pictures and we’ll say what we think before you book.
Surfaces we repair
- Acrylic baths
- Pressed steel baths
- Basins & shower trays
- Victorian roll-tops
- Cast iron baths
Your questions about bath re-enamelling in Marton
Will there be a smell?
Some materials have a smell while they’re applied, so we ventilate the room. It clears as the materials cure.
Someone resurfaced my bath and it’s peeling. Can you help?
Yes. Stripping the old coating adds time, so it’s reflected in the quote.
Can you change the colour of my bath?
Yes. Coloured baths can be resurfaced in white, and we can do the rest of the suite as well.
Can you do the outside of a roll-top?
Yes, roll-tops are a big part of our work. The inside is resurfaced, and we can refinish the outside as well.
What does bath re-enamelling cost?
Prices start from £350. We give a fixed price based on photos of the damage. Send a close-up and a picture of the whole item with your SK11 postcode.
Can pets and children be at home?
On the day, the room should be kept clear of pets and children, mainly so nothing gets touched before it has cured.
Do I need to be at home?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
How long does re-enamelling last?
It depends on preparation, use and care. With good preparation and gentle cleaning it lasts a long time, and our work is guaranteed for a year.
Marton and nearby
Marton is about 3 miles north of Congleton, in Cheshire East. From the centre of Marton to the outlying streets, the service is the same: fixed prices, tidy work and a one-year guarantee. Marton is one of 254 towns and villages in Cheshire East where we work. You can also see our page for Manchester, about 18 miles away.
Our visits in SK11 are booked in the same way as anywhere else. From Oak Lane, Bunce Lane and Congleton Road or a nearby road, a technician can come to you. Other places close to Marton include Hodgehill (2 miles north-west), Siddington Heath (2 miles north-west), Siddington (2 miles north), Gleadsmoss (2 miles west) and Fanshawe (2 miles north). Within a short drive, we also cover Crewe (12 miles south-west), Macclesfield (5 miles north-east), Congleton (3 miles south), Wilmslow (8 miles north), Knutsford (9 miles north-west) and Middlewich (9 miles west).
Around Marton
Typical jobs here are in homes near The Davenport Arms, Marton and District CofE Aided Primary School and St James' and St Paul's Church, among other places. The closest station to Marton is Congleton station, about 3.9 miles south. A little further out are Parkside Hospital (4.6 miles north-east). Green spaces nearby include Black Firs Wood Nature Reserve and The Cloud.
How we price bath re-enamelling
Prices start from £350. We charge the same across the UK, including Marton. The price reflects:
- Where the damage is and how we get to it
- Any earlier repairs that need removing first
- How hard the colour is to match
- The material
No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all make a difference, and doing several things on one visit costs less than separate visits.
How to get a fixed quote
You can take the pictures on your phone, there is no need for anything special. Just make sure we can see:
- Daylight if possible, and no flash reflection
- Whether it’s been repaired or coated before
- One picture of the whole bath
- A close-up of the damage, in focus
No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you’ll get a fixed figure back.
DIY kit or professional repair?
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
If you’re set on a kit, follow its instructions closely, and give it the full curing time. If it fails, we can still put it right.
Landlord and trade work in Marton
If you manage property in Marton, we will quote for several properties at once. Send pictures for each one and we will come back with a combined price.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We’re CHAS, Constructionline and SafeContractor accredited.
Repairs by material
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Steel frequently rusts by the plughole, so we check it carefully.
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
Also in Marton
What we’re called out for in Marton
Once enamel loses its gloss, it stains more easily, and scrubbing it wears it down further. That’s the point where re-enamelling makes sense.
The things customers generally mention when they call include:
- Stains that won’t shift
- A roll-top that is seen better days
- An old resurfacing that’s failing
- A bath in a colour that no longer suits
Comparing quotes
- How the colour is matched
- Aftercare advice
- Who turns up on the day
- Is the price fixed, and does it include VAT?
About our accreditations · Every repair comes with a one-year guarantee.
